• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.86-92
• /
• 2003

It is already known that the color of wool fabric dyed with disazo acid dyes could be changed in dyeing process and this is accelerated under alkaline condition. Focus was given to figuring out the mechanism of this color change, through the LC-MS analysis. In this study, no color change was seen in wool fabrics dyed with C. I. Acid Blue 113 under weak acidic, neutral and weak alkaline conditions for 1hour. However, the wool fabrics dyed under weak alkaline condition for a long time over 3 hours fumed reddish orange. When the wool fabrics dyed under weak acidic, neutral and weak alkaline conditions were treated with $0.5g/L\;Na_2C0_3$ solution, all of them turned reddish orange. On the other hand, the color of silk fabrics dyed with C. I. Acid Blue 113 were not changed after the same alkaline treatment. Wool contains cystine and cysteine, whereas silk does not. Due to the reversible reduction/oxidation process of cystine and cysteine in wool dyeing, the C. I. Acid Blue 113 of the dis-azo type is decomposed by reduction and consequently turned them into the reddish orange mono-azo types dye.

• Carbon letters
• /
• v.15 no.2
• /
• pp.105-112
• /
• 2014

Wastewater from textile industries is a major cause of water pollution in most developing countries. In order to address the issues of water pollution and high cost for treatment processes, the use of an inexpensive and environmentally benign adsorbents has been studied. The objective was to find a better alternative to the conventional methods. Lemon grass waste (ash) collected from a lemon grass stream distillation subunit in Bhutan was tested for dye removal from aqueous solutions. The study investigated the removal of methylene blue using the following operational parameters: initial concentration (100-600 mg/L), contact time, adsorbent dose (0.1-0.55 gm/100 mL), and pH (3-10). It was found that the percentage removal of dye increased with a decrease of the initial concentration and increased contact time and dose of adsorbent. The basic pH solution of dye showed better adsorption capacity as compared to the acidic dye solution. Langmuir and Freundlich adsorption isotherms were fitted to the data well. Data fitted better to Lagergren pseudo 2nd order kinetics than a 1st order kinetic model. Surface morphology was also examined via scanning electron microscopy. An elemental analysis was also carried out and the chemical composition and functional groups were analyzed using energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy techniques, respectively. The obtained results indicate that lemon grass ash could be employed as a low cost alternative to commercial activated carbon in wastewater treatment for the removal of dyes.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.277-291
• /
• 2013

The transport and recovery of Levafix brilliant red E-4BA and Levafix brilliant red E-6BA were investigated using polytetrafluoroethylene (PTFE) fiber based supported liquid membrane containing tetra butyl ammonium bromide (TBAB) in coconut oil as a carrier. The influencing parameters studied are: pH of the feed solution, concentration of dye in the feed solution, extractant concentration, and various kind of stripping agent, rate of stirring, time of transport, reusability of membrane and stability of membrane. Increase in TBAB concentration inside the membrane enhances the flux with its maximum value at $1.553{\times}10^{-4}$ M TBAB. Further increase in the concentration of TBAB leads to decreased rate of transport due to increase in viscosity of membrane liquid. The optimum conditions for dye transport are: pH of feed ($7{\pm}0.1$), $1.553{\times}10^{-4}$ M extractant concentration, 350 rpm for stirring, $4.9{\times}10^{-1}$ M potassium hydrogen phthalate as a stripping solution, the time of transport 6 h. It was noticed that flux values were increased with increasing dye concentration in the feed phase. Applying this study to textile wastewater, dyes were transported up to 98% in 6 h. This recovery technique is rewarding to environment and economic.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1998

The objectives of this study were to investigate the effects of mordants and dyeing method : on the dyeability and color fastness of the fabrics with the extract from Gardenia. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absolution bands of Amur cork tree, Gardenia extract was 440nm respectively and the wavelengths 440-460nm after the mordants were added in the color extracts(The bands of Gardenia extract shifts to short wavelength side as pH increased.). In all cases, the abosorbancies were increased. 2. The main color substances in extract from Gardenia were expected to be cretin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. For silk and cotton fabrics dyeing with Gardenia extract, $SnCl_2$ was the best mordants. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5-10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by synmordanting had a greater effect K/S value. 5. The color fastness of fabrics dyed with Gardenia extract against dry cleaning, washing, rubbing and perpiration was improved 1 level or so but light fastness was remained 1 level showing without any effect.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.11-19
• /
• 1998

For the purpose of standardization and practicability of dyeing by natural dyes, the mordanting and dyeing properties of cochineal and carminic acid were studied. Appropriate extraction, dyeing and mordanting condition of cochineal were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of cochineal solution was 495nm, carminic acid was 533nm and 577nm. The color of carminic acid solution was affected by pH 6~9. The optimum temperature to extract cochineal was $80-100^\circ{C}$ and dyeing solution for 1 hour. And effective dyeing time to silk was 60min. Effective mordanting temperature was $80^\circ{C}$, and its time was 30min. In case mordants concentration, the maximum absorbance of Sn solution was 3%, K, Cu and Cr were in 1%. K/S value of dyeing fabrics was recoginazed by mordant treatment, specially Fe, Sn, Al, Cu. In the case of cochineal light fastness was increased by mordant treatment, specially Fe treatment. Perspiration fastness was good in acidic solution than in alkaline solution and perspiration fastness of cochineal was poor. Fastness of abrasion and dry-cleaning were good and these fastness improvement were generally effective for post-mordanting treatment.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.15-26
• /
• 1994

Cotton fabrics were treated with the cellulase which is an enzyme to decompose cellulose and its actional mechanism is known. The optimum condition of the cellulase to the cotton fabrics and the weight losses, tensile strengths of the treated cotton fabrics were also obtained. The cellulase performs a specific catalytic action on the ${\beta}-1$, 4-glucosidic bonds of the cellulose molecules and hydrolyzes them. For that reason, the negative surface charges of the cotton fabrics were increased by additional generation. of hyrdoxyl groups. The increased surface charges cause the decrease of dye adsorption by inhibiting the approach of the anions of direct dyes. But, it was overcome by the use of enough amount of salt, it means that sodium ions of the salt neutralize the almost all of negative charges of the cotton fabrics. The improvement of the water absorbency is also due to the increased hydroxyl groups In addition, their handles including the mechanical properties were measured and caculated by KES system which is a measuring apparatus that numerizes and objectificates human's feeling, especially touch. As the results, we knew that KOSH(stiffness) and FUKURAMI(fulness & softness) were decreased and that NUMERI(smoothness) was increased.

• Textile Coloration and Finishing
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1991

The influences, that various mercerization conditions had on the dying property of cotton fiber, were studied. Crystallization degrees accompained by lattice transformation of slack-mercerized cotton by IR spectroscopic analysis and morphology of the slack-merceized cotton by SEM were observed in this research. The above results were as follows; 1. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 19 were gained in the case of 8M NaOH, $10^{\circ}C$, 20 min., about 2 times as large as the rates of untreated cotton and gained about 2.5 times in the case of 8M $NH_3$, $10^{\circ}C$, , 20 min. 2. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 2 were gained in the case of 2M NaOH, $10^{\circ}C$, 20 min., about 1.7 times as large as the rates of untreated cotton and gained about 2.4 times in the case of 8M $NH_3$, $10^{\circ}C$, 20 min. 3. It was confirmed by SEM that untreated cotton fibrils are formed in the shape of screw and treated cotton is rearranged in the direction of fiber axis.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.12-21
• /
• 2009

The dyeing property of direct-spinning type and seaisland type 0.2D micro polyester nonwoven fabrics was characterized by three disperse dyes (Dorosperse Red KFFB, Blue KGBR, Yellow KRL) at $120^{\circ}C$ and $130^{\circ}C$. Before and after reduction cleaning, dyeing fastness was evaluated and the thermomigaration after heat setting at $180^{\circ}C$ for 60 min were also evaluated. Direct-spinning type fabric showed better dyeing property, wash fastness, and light fastness, but worse rub fastness than seaisland type fabric. The dyeing property and fastness of direct-spinning type fabric increased at higher dyeing temperature, whereas seaisland type fabric exhibited lower dyeing fastness and the increase of thermomigration at higher dyeing temperature. Non-fixed dye in fiber surface was removed by reduction cleaning process, then dyeing fastness was improved and thermomigration decreased. The higher dye uptake of direct-spinning type non-woven fabric caused the increase of dye molecule migration from fiber internal to fiber surface, so this fabric showed larger thermomigration than seaisland type non-woven fabric.