• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• 한국의류학회지
• /
• 제48권4호
• /
• pp.707-728
• /
• 2024

This study aimed to assess the colorizing properties of bacterial cellulose (BC) using plant-based dyes, namely spinach, beet, and banana peel, and determine the dyeing conditions of each dye based on color strength (K/S) values. Tannic acid and walnut shell powder were utilized as bio-mordants, and their effects on the dyeability of BC were compared to metallic mordants. Additionally, the type of mordant and the mordanting method were assessed according to their rubbing fastness and dry-cleaning fastness. The K/S values of the colorized and mordanted BCs were also compared to examine their mordanting conditions. Finally, the mordanting conditions for spinach, beet, and banana peel dyeing were selected as post-mordanting with tannic acid, meta-mordanting with tannic acid, and post-mordanting with walnut shell powder, respectively. Based on the results, the selected mordanting conditions improved both rubbing fastness and dry-cleaning fastness of BCs to grade 5, and the light fastness achieved grade 4-5. The tensile strength and flexibility of the dyed BCs were also enhanced and comparable to that of untreated cowhide leather.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.25-33
• /
• 2001

This study is to analyze Korean-Chinese women's Costume in Yabian with factors such as reform opening-up, economic growth, change of social values, development of technology, more education opportunities and influence of mass media. It divides the 1990's into two halves. Photos, interview, observation and relevant literature were used for this study. Even though economy grew rapidly, they needed to purchase daily goods other than clothes. In a way that they preferred practicality, it showed somewhat it was still developing. The trend in the first half of the 1990's was characterized : first, Synthetic or artificial fibers and ready-made suits were popular ; second, there still remained the men's style ; third, they wore Tanrikoo(彈力袴), Tisingkoo(體型袴), Jiaotakoo(脚袴) because of its properties of activeness and comfort ; fourth, shoulders looked ore prominent with pads as they were used in Chungsanfoo(中山服) ; fifth, clothes in grey and dark blue was in fashion ; sixth, they wore hand-made knit vests and sweaters and often mountain-climbing gears for its light and warm quality ; seventh, along with opening-up, various materials and colorful clothes were in style, which satisfied women's desire for beauty. They decorated Hanbok(韓服), using sleeves with colors, golden ornaments, flower patterns embroidery, materials of different color in collar and tie and dyes of sleeves and skirts. In the first half of the 1990's when the opening-up was beginning, there were diverse styles and colors in fashion, yet not close to good quality. As the economy grew, the second half of the 1990's was characterized by good palate, individuality, favouritism on foreign goods, rapid change of fashion. For instance, fur coat and woolen fabric were favored. Economic growth led to abundance of cloth, dyes and decorative materials. In addition, people possessed more clothing and it was possible for them to wear both Hanbok and wedding dress in wedding ceremony. People placed their standards on competency and financial ability rather than ideology. Worship disappeared and individuality arose. Therefore, apparel functioned not only as protection but as suits with aesthetic purpose. This resulted in introduction of bold style, imitation of western countries and extension of use of Hanbok. With the help of mass media, transportation, telecommunication, contact with Korean company and civilians, Korean and western cultures, through Korea, were accepted. Change in structure of economic status caused excessive spending and more educational opportunities that enabled people to accept foreign culture quickly. Values moved onto new, beautiful and better characteristics. it was possible to have suits ready-made due to improvement of mass production and cotten, wool, linen, silk became popular owing to technology. New technology, the bases of mass consumption, increased possession of clothing and accelerated change of fashion. In summary, women's Costume in Yanbian were affected by the factors in economy, politics, culture contact as well as change of society and technology.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.34-34
• /
• 2011

PET/면, 나일론/PET, 나일론/면 등 다양한 복합섬유소재를 염색하기 위해서는 복합섬유소재를 구성하는 각각의 섬유소재에 따라 적합한 염료를 선정하고 그에 맞는 염색방법을 사용하여 진행되고 있다. 하지만 이런 경우 색상과 견뢰도 등의 물성을 맞추기 위한 복잡한 염색공정 및 긴 염색시간에 의한 생산비용 상승 등 여러 문제점이 있다. 이러한 문제점을 해결하기 위해 하나의 염료를 이용하여 다양한 섬유를 염색하는 방법에 대한 많은 연구가 이루어지고 있다. 새로운 염료합성의 경우 섬유와 결합할 수 있는 반응기를 분산염료구조에 도입하여 염색조건에 따라 다양한 섬유를 염색할 수 있는 universal dye의 개발에 초점이 맞추어져 있다. 반응성염료와 분산염료의 특성을 동시에 만족시키기 위한 일환으로서 염료의 분자 구조 내에 상기의 염료특성을 동시에 발휘하는 소위 "반응성 분산염료"의 개발이 이에 속한다. 본 연구의 목적은 화학구조가 다른 네 종류의 sulphatoethylsulphone기를 갖는 반응성분산염료들을 합성하고 이들의 나일론, PET, 면 및 교직물에 대한 염색성을 분석하는 것이다. 면 섬유에 대한 Dye 1~4의 염색온도에 따른 염색성을 살펴보면, 각 염료들의 염색성은 염색온도에 따라 큰 영향을 받고 있음을 알 수 있으며, Dye 1, 4는 염색온도가 높을수록 K/S 값이 증가하고 Dye 2, 3은 염색온도가 낮을수록 K/S 값이 증가함을 알 수 있다. Nylon에 대한 Dye 1의 염색속도는 pH 4 > pH 5 > pH 8 > pH 7 > pH 6의 순서로 나타나 pH 6에서의 염착 평형이 pH 4보다 40분 정도 늦게 도달하였다. 나일론과 PET의 동욕염색에 있어 Dye 1은 나일론의 경우 초기부터 빠른 흡착을 보이며 $100^{\circ}C$가 되는 60분에는 K/S값이 16에 도달하여 염착 평형에 근접한 것을 알 수 있으며, PET는 $100-200^{\circ}C$ 사이에서 염색속도가 빨라지며 본격적으로 흡수하였다. N/C 교직물에 대한 Dye 2, 3의 빌드업성은 두 염료 모두 염료농도의 증가에 따라 K/S 값 역시 선형적으로 증가하는 것으로 나타났다. 나일론 섬유는 네 가지 염료로 우수하게 염색되었고, 면 섬유는 수용성기를 가진 Dye 2와 3, 그리고 PET 섬유는 소수성이 높은 Dye 1과 4가 적합하였다. N/P 및 N/C 교직물의 염색에 있어 나일론 성분으로 염료가 더 많이 흡착하여 나일론섬유가 더 진하게 염색되지만 교직물의 직물조직에 의하여 표면과 이면은 각각 거의 동색으로 보였다.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.1024-1031
• /
• 2012

The thermal bonding PET fabrics were produced through high temperature steaming (HTS) of low melting PET yarn as warp and composite fancy yarn containing low melting PET yarn as weft. The low melting PET yarn of sheath-core structure consisted of a regular PET in core portion and low melting PET in sheath portion. The composite fancy yarn consisted of regular PET yarn as inner part and effect part and low melting PET yarn as binding part. This study was carried out to investigate the melting behavior of thermal bonded PET fabric, the effect of HTS on the thermal bonding, mechanical properties, and dyeing properties. The melting peak of low melting PET yarn showed two melting peaks caused by sheath-core structure. Almost the entire thermal bonding of the fancy PET fabrics containing low melting PET yarn has formed at $200^{\circ}C{\times}3min$ of HTS. The tensile strength in warp and weft direction of the fancy PET fabrics slightly decreased as temperature of HTS increased. The total K/S value of the fancy PET fabrics decreased slightly to $180^{\circ}C{\times}3min$ of HTS, while increased slightly above $200^{\circ}C{\times}3min$ of HTS. The changes in the hue angle ($H^{\circ}$) of the thermal bonded fancy PET fabrics dyed with disperse dyes hardly ever happened.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.59-59
• /
• 2011

현재 우리들 사회의 환경과 생활이 윤택해 짐에 따라 문화생활을 영위하게 되고, 건강에 대한 의식이 커져가고 있다. 이에 건강을 유지하고 증진시킬 수 있는 환경 친화적인 제품에 대한 관심 또한 높아지고 있다. 특히 기존의 합성염료보다 천연염료로 염색한 제품은 고부가가치를 창출하며 환경친화적이고 인체친화적이다. 이를 바탕으로 Cleaner제품에 천연염색을 하고 천연항균제를 처리하여 제품의 세탁 후 항균지속성에 관하여 검토하였다. 본 연구에서는 대나무섬유와 N/P극세사 혼방소재에 꼭두서니와 치자로 염색한 뒤, 욕비 1:30으로 고정하고, 5%천연항균제 용액을 제조하였다. 제조된 용액에 시료를 5분간 침지 후, Pick-up율 70%로 조정하였다. 그리고 $80^{\circ}C$에서 20분간 건조 후, $110^{\circ}C$에서 1분간 열처리 하였다. KS K IOS 105-C06의 방법으로 30회 세탁하였다. KS K 0693과 AATCC 100의 시험방법으로 Staphylococcus aureus ATCC 6538(황색포도상구균)과 Klebsiella pneumoniae ATTC 4352(폐렴구균)의 균주에 대한 항균성을 측정하였다. KS K 0693의 경우 Staphylococcus aureus ATCC 6538(황색포도상구균)와 Klebsiella pneumoniae ATTC 4352(폐렴구균)에서 모두 99.9%의 정균감소률을 나타내었고, 또한 AATCC 100에서도 Staphylococcus aureus ATCC 6538(황색포도상구균)과 Klebsiella pneumoniae ATTC 4352(폐렴구균)에서도 모두 99.9%의 정균감소률을 나타냈다.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• Journal of Microbiology and Biotechnology
• /
• 제30권4호
• /
• pp.615-621
• /
• 2020

Laccases are multicopper oxidases with important industrial value. In the study, a novel laccase gene (mco) in a Staphylococcus haemolyticus isolate is identified and heterologously expressed in Escherichia coli. Mco shares less than 40% of amino acid sequence identities with the other characterized laccases, exhibiting the maximal activity at pH 4.0 and 60℃ with 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) diammonium salt (ABTS) as a substrate. Additionally, the Mco is tolerant to a wide range of pH, heavy metal ions and many organic solvents, and it has a high decolorization capability toward textile dyes in the absence of redox mediators. The characteristics of the Mco make this laccase potentially useful for industrial applications such as textile finishing. Based on BLASTN results, mco is found to be widely distributed in both the bacterial genome and bacterial plasmids. Its potential role in oxidative defense ability of staphylococci may contribute to the bacterial colonization and survival.