• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.7-12
• /
• 2000

This paper presents the electrochemical etch-stop characteristics of single-crystal silicon in a tetramethyl ammonium hydroxide(TMAH):isopropyl alcohol(IPA):pyrazine solution. Addition of pyrazine to a TMAH:IPA etchant increases the etch-rate of (100) silicon, thus the elapsed time for etch-stop was shortened. The current-voltage (I-V) characteristics of n- and p-type silicon in a TMAH:IPA:pyrazine solution were obtained, respectively. Open circuit potential(OCP) and passivation potential(PP) of n- and p-type silicon, respectively, were obtained and applied potential was selected between n- and p-type silicon PP. The electrochemical etch-stop is applied to the fabrication of 801 microdiaphragms having $20{\mu}m$ thickness on a 5-inch silicon wafer. The averge thicknesses of 801 microdiaphragms fabricated on the one wafer were $20.03{\mu}m$ and standard deviation was ${\pm}0.26{\mu}m$. The silicon surface of the etch-stopped microdiaphragm was extremely flat without noticeable taper or other nonuniformities. The benefits of the electrochemical etch-stop in a TMAH:IPA:pyrazine solution become apparent when reproducibility in the microdiaphragm thickness for mass production is considered. These results indicate that the electrochemical etch-stop in a TMAH:IPA:pyrazine solution provides a powerful and versatile alternative process for fabricating high-yield silicon microdiaphragms.

• 대한전자공학회논문지SD
• /
• 제42권1호
• /
• pp.19-24
• /
• 2005

본 논문에서는 압저항 효과를 이용한 Si 압력센서 제작을 최적화하였다. Si 압저항형 압력센서의 제작공정에 있어서 압저항과 알루미늄 회로 패턴 이후에 Si 이방성 식각을 통하여 수율이 개선되었다. 압저항의 위치와 공정 파라메터는 각각 ANSYS와 SUPREME 시뮬레이터를 이용하여 결정하였다. Boron-depth 프로파일 측정으로부터 p-형 Si 압저항의 두께를 측정한 결과 SUPREME 시뮬레이션으로부터 얻은 결과와 잘 부합하였다. 다이아프램을 위한 Si 이방성 식각 공정은 암모늄 첨가제 AP(Ammonium persulfate)를 TMAH(Tetra-methyl ammonium hydroxide) 용액에 첨가함으로써 최적화되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.147-151
• /
• 2000

This paper presents the electrochemical etch-stop characteristics of single-crystal silicon in a tetramethyl ammonium hyciroxide(TMAH):isopropyl alcohol(IPA):pyrazine solution. Addition of pyrazine to a TMAH:IPA etchant increases the etch-rate of (100) silicon, thus the elapsed time for etch-stop was shortened. The current-voltage(I-V) characteristics of n- and p-type silicon in a TMAH:IPA:pyrazine solution were obtained, respectively. Open circuit potential(OCP) and passivation potential(PP) of n- and p-type silicon, respectively, were obtained and applied potential was selected between n- and p-type silicon PP. The electrochemical etch-stop is applied to the fabrication of 801 microdiaphragms having $20\;{\mu}m$ thickness on a 5-inch silicon wafer. The averge thicknesses of 801 microdiaphragms fabricated on the one wafer were $20.03\;{\mu}m$ and standard deviation was ${\pm}0.26{\mu}m$. The silicon surface of the etch-stopped microdiaphragm was extremely flat without noticeable taper or other nonuniformities. The benefits of the electrochemical etch-stop in a TMAH:IPA:pyrazine solution become apparent when reproducibility in the microdiaphragm thickness for mass production is considered. These results indicate that the electrochemical etch-stop in a TMAH:IPA:pyrazine solution provides a powerful and versatile alternative process for fabricating high-yield silicon microdiaphragms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.416-417
• /
• 2005

In this study, we optimized the process of Si anisotropy etching by combing tetramethyl ammonium hydroxide (TMAH) etching process with ultrasonic wave technology. New ultrasonic TMAH etching apparatus was developed and it was used for fabricating a $20{\mu}m$ thick diaphragm for Si piezoresistive pressure sensors. Based on comparison study on etch rate and surface flatness, it was observed that the Si anisotropy etching methode with new ultrasonic TMAH etching apparatus (at 40 kHz/ 500 watt) was superior to conventional etching methods with TMAH or TMAH+ammonium persulfate(AP) solutions.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 춘계학술대회 발표 논문집
• /
• pp.23-28
• /
• 2003

본 논문에서는 MEMS 공정기술을 이용하는 압저항(piezoresistive) 압력센서용 다이아프램의 최적구조 제작을 위한 TMAH(Tetramethyl Ammonium Hydroxide)의 식각특성을 연구하였다. KOH, EDP 등 기존의 공정 수행에 있어서 부딪치게 되는 환경적 요인을 개선하고, 생산성 향상을 위해 독성이 없고 CMOS 집적회로 공정과 호환성이 높은 TMAH를 사용하여, 식각온도와 TMAH 농도 및 식각시간에 따른 에칭률 변화를 측정하였다. 식각온도가 증가 함에 따라, 그리고 TMAH 농도가 감소함에 따라, Si 에칭률은 증가하였으나 hillock 발생률이 증가하여 식각표면의 평탄화 정도가 나빠졌다. 이러한 단점을 AP(Ammonium Persulfate) 첨가제를 이용하여 해결하였다. l5wt% 농도의 TMAH 800ml 용액을 가지고 매 10분당 같은 양의 AP를 1시간당 5g이 되도록 첨가하여, 한변의 길이가 100~400 $\mu\textrm{m}$인 정사각형 모양을 가진 우수한 이방성 다이아프램을 성공적으로 제작하였다.

• 한국환경보건학회지
• /
• 제50권3호
• /
• pp.221-228
• /
• 2024

Background: Social interest is increasing due to frequent accidents caused by chemicals in the electronics industry. Objectives: The purpose of this study is to present a management plan by evaluating the exposure characteristics of dichloromethane (DCM), trichloromethane (TCM), and tetramethyl ammonium hydroxide (TMAH), which are high-risk substances to which people may be exposed in the electronics industry in South Korea. Methods: To investigate the handling companies and status of the hazardous chemicals DCM, TCM, and TMAH, the handling status of the three substances was classified based on electronics industry-related codes from the 2019 Work Environment Survey (Chemical Handling and Manufacturing) data with work environment measurement results for five years. Results: DCM, TCM, and TMAH are commonly used as cleaning agents in the electronics industry. For DCM, it was found that all work environment measurement results from 2018 to 2021 but not 2022 exceeded the exposure standard. Conclusions: Identifying the distribution channels of hazardous chemicals is an intervention point that can reduce exposure to hazardous chemicals. It requires management through tracking systems such as unique verification numbers at the import and manufacturing stages, and proper cultivation of and related support for handling chemicals by business managers.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.481-486
• /
• 1997

This paper describes the anisotropic etching characteristics of Si in acqueous TMAH/IPA solutions. The etch rates of (100) oriented Si crystal planes decrease with increasing TMAH concentration and IPA concentration. Etchant concentration and etch temperature have a large effect on hillock density. Hillock density strongly increase with lower TMAH concentration and higher etch temperature. The etched (100) planes are covered by pyramidal-shaped hillocks below TMAH 15 wt.%, but very smooth surface is obtained TMAH 25 wt.%. The addition of IPA to TMAH solution leads to smoother surfaces of sidewalls etched planes. Undercutting ratio of pure TMAH solution is much higher than KOH. But, addition of IPA to TMAh the underrcutting ratio reduces by a factor of 3∼4. Therefore, acqueous TMAH/IPA solution is able to use as anisotropic etchant of Si because of full compability with IC fabrication process.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1023-1028
• /
• 2009

Cleaning is required following CMP (chemical mechanical planarization) to remove particles. The minimization of particle residue is required with each successive technology generation, and the cleaning of wafers becomes more complicated. In copper damascene process for interconnection structure, it utilizes 2-step CMP consists of Cu and barrier CMP. Such a 2-steps CMP process leaves a lot of abrasive particles on the wafer surface, cleaning is required to remove abrasive particles. In this study, the chemical mechanical cleaning(CMC) is performed various conditions as a cleaning process. The CMC process combined mechanical cleaning by friction between a wafer and a pad and chemical cleaning by CMC solution consists of tetramethyl ammonium hydroxide (TMAH) / benzotriazole (BTA). This paper studies the removal of abrasive on the Cu wafer and the cleaning efficiency of CMC process.

• 한국응용과학기술학회지
• /
• 제23권4호
• /
• pp.300-306
• /
• 2006

The esterification of palmitic acid in rapeseed oil and methanol emulsified by propylene glycol with PTSA(p-toluene sulfonic acid) was followed by the transesterification of rapeseed oil into biodiesel with 1(w/v)% GMS(glycerol monostearate) as an emulsifier using TMAH(tetramethyl ammonium hydroxide) catalysts at $60^{\circ}C$. The former reaction was optimized at the 1:20 of molar ratio of oil to methanol and 5wt% PTSA, and the latter was optimized at the 1:8 of molar ratio of oil to methanol and 0.8wt% TMAH. The overall conversion into biodiesel was 98% after 60min of reaction time at the 1:8 of molar ratio, 0.8wt% TMAH and $60^{\circ}C$. TMAH was a good catalyst to control the viscosity of biodiesel mixture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1880-1884
• /
• 2008

Cleaning is required following CMP (chemical mechanical planarization) to remove particles. The minimization of particle residue is required with each successive technology generation, and the cleaning of wafers becomes more complicated. In copper damascene process for interconnection structure, it utilizes 2-steop CMP consists of Cu CMP and barrier CMP. Such a 2-steps CMP process leaves a lot of abrasive particles on the wafer surface, cleaning is required to remove abrasive particles. In this study, the buffing is performed various conditions as a cleaning process. The buffing process combined mechanical cleaning by friction between a wafer and a buffing pad and chemical cleaning by buffing solution consists of tetramethyl ammonium hydroxide (TMAH)/benzotriazole(BTA).