• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.56-62
• /
• 1987

Tetragonal phase PZT ceramics with a tetragonality of c/a=1.027 to 1.041 were sintered at 1275$^{\circ}C$ for one hour. And the directionality of domain arrangement, microstructure, dielectric and aging properties were investigated. With increasing tetragonality, the directionality of domain arrangement of 180$^{\circ}$-domain on the surface is smaller than that in the internal part of specimens. Dielectric constants after poling are increased due to the increased internal energy or decreased due to the microcracks created by poling.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.483-489
• /
• 2020

BaTiO₃ powder was synthesized by a solid-state reaction using BaCO₃ and TiO₂. Different calcination temperatures (800℃, 850℃, 900℃, and 950℃) were set to investigate their effects on the properties of BaTiO₃ powder. The synthesized BaTiO₃ phase was confirmed to be a single phase by XRD, and the tetragonality (c/a) and crystallite size were calculated. Thereafter, each calcinated BaTiO₃ was sintered at five different sintering temperatures (1,100℃, 1,150℃, 1,200℃, 1,250℃, and 1,300℃), and the tetragonality, density, porosity, dielectric constant, and grain size were measured. As the calcination temperature increased, the tetragonality and crystallite size also increased, to 1.008 and 66 nm, respectively, at 950℃. Moreover, most pellets showed increased density, dielectric constant, and tetragonality as the sintering temperature increased up to 1,250℃; the same parameters slightly decreased at 1,300℃. It is noteworthy that the tetragonality of BaTiO₃ at 1,250℃ exhibits a very high c/a value of 1.0084. In addition, the grain size and dielectric constant measured near the Curie temperature increased as the sintering temperature increased.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.162-167
• /
• 2003

광페롤용 안정화 지르코니아 소결체의 특성을 평가하기 위하여, A, B와 C사의 원료를 이용하여 1350, 1400 및 $1450^{\circ}C$로 소결하여 시편을 제작하였다. 각각의 열처리 온도에 따른 결정화도, 미세구조 및 기계적 특성을 조사하였다. X-선 회절 분석법과 전계방사 주사형 전자현미경을 이용하여 소결된 시편의 결정화도와 미세구조를 분석하였으며, 만능재료 시험기와 비이커스 경도계를 이용하여 꺽임 강도와 비이커스 경도를 측정하였다 실용적인 측면에서 볼 때, 비교적 저온인 $1350^{\circ}C$로 소결한 시편 B의 경우가 tetragonality도 높고 좋은 기계적인 강도를 나타냈다.

• 센서학회지
• /
• 제7권1호
• /
• pp.51-60
• /
• 1998

초전형 적외선센서를 제조하기 위하여 La가 첨가된 $PbTiO_{3}$(PLT)박편을 소결온도, La첨가량 및 소결시의 분위기분말의 양과 같은 제조조건을 달리하면서 제조하여 이에 따른 시편의 구조적 특성을 X-선 회절기, 전자현미경 및 상대밀도의 측정을 통하여, 유전특성을 유전상수와 큐리온도 등의 측정을 통하여 조사하였다. La 첨가랑이 증가함에 따라 정방성비 c/a는 감소하였으며, 상대밀도 및 입자의 크기는 증가하였다. 이는 La 첨가량이 증가함에 따라 전하중성을 유지하기 위한 Pb공공의 증가에 기인하는 것으로 판단된다. 소결시 분위기분말의 증가는 La 첨가에 따른 효과에 비해 미미하지만 정방성비를 미세하게나마 증가시켜 PbO의 휘발을 감소시키는 것으로 나타났다. La 첨가량에 따른 정방성비의 감소로 상온에서의 유전상수는 증가하였으며 큐리온도는 감소하였다.

• 대한전기학회논문지
• /
• 제44권11호
• /
• pp.1488-1493
• /
• 1995

In this study, the structural, electrical and dielectric properties were investigated in (P $b_{0.76}$ $Ca_{0.24}$)[( $Co_{1}$2/ $W_{1}$2/)$_{0.04}$ $Ti_{0.96}$) $O_{3}$ system ceramics which were manufactured with the addition of Mn $O_{2}$. According to the increment of Mn $O_{2}$ addition, tetragonality was decreased. The specimen added with 1.5 mol% Mn $O_{2}$ and sintered at 1150.deg. C showed the highest density of 7.06[g/c $m^{3}$]. The variations of grain xize as a function of Mn $O_{2}$ addition were negligibly small. But grain was grown until 7.88[.mu.m] with increasing sintering temperature. Electromechamical coupling factor planar mode $K_{p}$ was decreased to a small value of $K_{p}$ = 0 in all the specimens added with Mn $O_{2}$ and sintered at 1150.deg. C & 1200.deg. C.& 1200.deg. C.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.310-316
• /
• 2012

Nanocrystalline $BaTiO_3$ powder could be synthesized by solid-state reaction using the mixture which was prepared by a high energy milling process in a bead mill for $BaCO_3$ and nanocrystalline $TiO_2$ powders mixture. Effect of the milling time on the powder characteristic of the synthesized $BaTiO_3$ powder was investigated. Nanocrystalline $BaTiO_3$ with a particle size of 50 nm was obtained at $800^{\circ}C$. High tetragonal $BaTiO_3$ powder with a tetragonality(=c/a) of 1.009 and a specific surface area of $7.6m^2/g$ was acquired after heat-treatment at $950^{\circ}C$ for 2 h. High energy ball milling was effective in decreasing the reaction temperature and increasing the tetragonality.

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1108-1114
• /
• 1999

Microstructure and electrical properties of ZnO-doped (0-5 mol%) 0.05 Pb(Mn1/3Sb2/3)O3-0.95 PZT ceramics were investigated. Sintering temperature was decreased to 100$0^{\circ}C$ due to eutetic reaction between PbO and ZnO. Grain-size increased up to adding 1mol% ZnO and then decreased. Compositions of grain and grain-boundary were investigated by WDS. Lattice parameter was decreased with ZnO addition. Density increased with ZnO addition and reached to the maximum of 7.84(g/cm2) at 2 mol% ZnO. The effect of ZnO on electrical properties of PMS-PZT was investigated. At 3mol% ZnO addition electromechanical coupling factor(kp) was about 50% and relative dielectric constant($\varepsilon$33/$\varepsilon$0) was 997 Mechanical quality factor(Qm) decreased with ZnO addition. Lattice parameters and tetragonality(c/a) were measured to investigate relationship between the electric properties and substitution of Zn2+. At 3 mol% ZnO tetragonality was maximiged at c/a=1.0035 Curie temperature (Tc) decreased slightly with ZnO addition.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.516-524
• /
• 1995

In this study, to prepare the dielectric (Ba, Sr)TiO3 thin films by the sol-gel process, Titaminum (IV) sio-propoxide (Ti[OCH(CH3)2]4), Ba and Sr acetate were used for sol and thin films were prepared by dip-coating process. Stability of sol decreased with the increase of Sr, and thickness of thin films were obtained 0.13~0.17${\mu}{\textrm}{m}$ by 1 coating cycle. Transmittance of amorphous thin films heated at 500 and 55$0^{\circ}C$ was very good, and crystallization tendency of thin films according to heat-treatment temperature and crystallization characteristics of thin films heated at 11$0^{\circ}C$ for 3 hrs were analysed. As a result, good perovskite structure was obtained higher than 100$0^{\circ}C$, and tetragonality of thin film was decreased but pyrochlore was formed with increasing Sr. In case of addition to substitute 0.4mol% Sr for Ba, dielectric constant was 288 and loss factor (tan $\delta$) was 0.04.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.137-145
• /
• 2009

A remarkable improvement of the productivity in barium titanate by slurry spray pyrolysis process was realized by supplying solid source slurry into the rector. The produced barium titanate powders showed uniform powder properties, and reproducibility with higher tetragonality in the range of 80$\sim$200 nm, case by case. The secondary calcination experiments of the as-prepared powders by spray pyrolysis revealed that the powders as-prepared over 700$^{\circ}C$ showed perfectly different behavior with the lower temperature's ones and the solid state reaction’s case. The result was discussed in terms of the reaction mechanism based on the activation energy analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.419-422
• /
• 2000

This paper was to measure the structure, piezoelectric properties of 0.05Pb($A1_{0.5}$$Nb_{0.5}$)-0.95Pb($Zr_{0.52}$$Ti_{0.48}$)$O_3$ ceramics dopped with additive after creating the specimens with a general method. It is shown that X-ray diffraction pattern variation of lines (200) have tendency to move in simple peak by addition of additive. According to the increase of $Cr_2$$O_3$, tetragonality hardly have variation, according to the increase of $Fe_2$$O_3$, tetragonality decreased on the whole. According to dopping with $Cr_2$$O_3$ and $Fe_2$$O_3$, electromechanical factor(kp) largely increased, in case of sintering at $1200^{\circ}C$ kp was maximum value of 40.04[%] at $Cr_2$$O_3$ 0.3wt%, and maximum value of kp 42.9 [%] at $Fe_2$$O_3$, 0.9wt%. In case of sintering at 120$0^{\circ}C$, mechanical duality factor(Qm) was maximum value of Qm 268.8 at $Cr_2$$O_3$, 0.9 wt%.