• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.27-39
• /
• 2009

Compulsive consumption is regarded as a global phenomenon that can adversely affect consumer well-being. Although the topic has been studied in different cultural settings, we have seen relatively little theory development and explanations of compulsive behavior Nearly all previous empirical studies attempt to explain this behavior by correlating measures of compulsive behavior with independent variables taken within the same time frame. However, recent developments in social sciences suggest that such a phenomenon may best understood in the context of the person's earlier-in-life experiences. Using the life course paradigm as an overarching framework, the present research extends previous work on this topic. Following hypotheses were drawn from literature review: H1: The earlier in childhood and adolescence a person experiences family dislocation, the greater his or her likelihood of exhibiting compulsive behaviors in adulthood. H2: The earlier in life the young person experienced family dislocation, the greater the number of family disruption events the young person experienced prior entering adulthood years. H3: Family dislocation leads to (a) increased frequency of socio.oriented family communications and (b) decreased frequency of concept-oriented family communication. H4: Young adults who were raised in families characterized by a strong socio-oriented communication structure are more likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a weak socio-oriented family communication structure. H5: Young adults who were raised in families characterized by a strong concept-oriented communication structure are less likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a week concept-oriented family communication structure. H6: The relationship between family disruption events experienced during adolescence and perceived stressfulness of these events is moderated by (a) global family support, (b) emotional family support, and (c) material family support. Those reporting higher levels of family support as teenagers are less likely to report experiencing stress due to family disruption events. H7: Perceived stressfulness of family disruption events experienced during adolescent years are associated with compulsive consumption tendencies in early adulthood. H8: The greater the number of family disruption events young adults experienced during their adolescent years the more frequent was their communication about consumption with their peers. H9: The more frequent was the young persons' communication with their peers about consumption during their adolescent years, the more likely they are to report compulsive buying tendencies as young adults. We use a sample of 120 Thai undergraduate students attending classes taught in English as part of a four-year international program. Product-moment correlations, hierarchical regression analysis and partial correlation were used to analyze data. Results of testing hypotheses showed that hypothesis 2, 4, 7 and 9 were supported and hypothesis 1, 3, 5, 6 and 8 were not supported. Our study did not find a significant relationship between the age when a person experienced family dislocation and their compulsive behavior tendencies expressed as young adults. We did not find a significant relationship between family dislocation and family communication structures. But we found a significant positive relationship between socio-oriented communication structure and compulsive buying and a significant relationship between our peer communication and compulsive buying measures. Also we found perceived stressfulness due to the disruptive events to have a significant positive relationship between the perceived stressfulness and compulsive buying. Implications from these findings, limitations of this research and future research suggestions were discussed.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.25-49
• /
• 2009

Advances in technology have resulted in the emergence of new information systems. The convergence of IT and manufacturing sectors has blurred the boundaries among industries. Also, such convergence has become established as a paradigm to build a new area. Especially the convergence of broadcasting and telecommunication, notably in the case of IPTV (Internet Protocol Television), is among the most salient examples of its kind in recent years as a major case of disruptive technology innovation. Despite its much fanfare, such convergence, however, has not fulfilled the expectation; it has not produced positive economic effects while negatively affecting the growth of IPIV. Stakeholders in and around IPIV including telecommunication companies, broadcasting corporations, and government bodies wish to gain control of IPTV under their wings. IPTV has drifted in the midst of conflicts among the stakeholders in and around IPTV, particularly telecommunication and broadcasting organizations in a broad sense. Our empirical research intends to deal with how audiences accept IPTV and how firms provide IPTV services to utilize their resources. Three research questions in this paper include, first, whether Technology Acceptance Model (TAM) can sufficiently explain the acceptance of IPTV as an information system. The second question concerns with empirically testing the playful aspect of IPTV to increase its audience acceptance. Last, but not least, this paper deals with how firms can efficiently and effectively allocate their limited resources to increase IPTV viewers. To answer those three main questions of our study, we collect data from 197 current subscribers of high speed internet service and/or cable/satellite television. Empirical results show that 'perceived usefulness (PU) $\rightarrow$ Intention to use' and 'perceived ease of use (PEU) $\rightarrow$ Intention to use' are significant. Also, 'perceived ease of use' is significantly related to 'perceived usefulness.' Perceived ease of handling IPTV without much effort can positively influence the perceived value of IPTV. In this regard, engineers and designers of IPTV should pay more attention to the user-friendly interface of IPTV. In addition, 'perceived playfulness (PP)' of IPTV is positively related to 'intention to use'. Flow, fun and entertainment have recently gained greater attention in the research concerned with information systems. Such attention is due to the changing features of information systems in recent years that combine the functional and leisure attributes. These results give practical implications to the design of IPTV that reflects not just leisure but also functional elements. This paper also investigates the relationship between 'perceived ease of use (PEU)' and 'perceived playfulness (PP).' PEU is positively related to pp. Audiences without fear can be attracted more easily to the user-friendly IPTV, thereby perceiving the fun and entertainment with ease. Practical implications from this finding are that, to attract more interest and involvement from the audience, IPTV needs to be designed with similar or even more user friendly interface. Of the factors related to 'intention to use', 'perceived usefulness (PU)' and 'perceived ease of use (PEU)' have greater impacts than 'perceived playfulness (PP).' Between PU and PEU, their impacts on 'intention to use' are not significantly different statistically. Managerial implications of this finding are that firms in preparation for the launch of IPTV service should prioritize the functions and interface of IPTV. This empirical paper also provides further insight into the ways in which firms can strategically allocate their limited resources so as to appeal to viewers, both current and potential, of IPTV.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.139-144
• /
• 2009

Recently, the mathematical analysis of stent simulation has been improved, with the help of development of various tool which measure mechanical property and location of stent in artery. The most crucial part of the stent modeling is how to design ideal stent and to evaluate the interaction between stent and artery. While there has been great deal of researches on the evaluation of the expansion, stress distribution, deformation of the stent in terms of the various parameters, few verification through computer simulation has been performed about deformation and stress distribution of the stent. In this study, we have produced the corresponding results between experimental test using Universal Testing Machine and computer simulation for the ideal model of stent. Also, we have analyzed and compared stress distribution of stent in the cases of that with membrane and that without membrane. The results of this study would provide minimum change of plan and good quality for ideal stent replacing damaged artery through the analysis using computer simulation in the early stage of stent design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.191-206
• /
• 2020

Although several studies have been conducted on unification and the life of North Korean refugees, there have been few studies comparing the characteristics of North Korean refugees with South Korean workers, in terms of human resources in business administration. By considering the limitations of these prior studies, this study analyzed whether there are differences in factors affecting organizational commitment and turnover intention through a group comparative analysis between North Korean refugees and South Korean workers. For a comparative analysis between the two groups, we recruited 145 workers from North Korea and 213 South Korea-born workers. We found the following results with a multi-group structural equation model. We confirmed the measurement homogeneity by ensuring that both groups were equally aware of the measurement tools affecting organizational commitment and turnover intentions. As a result of testing the homogeneity of measurement, we also confirmed that there was a significant difference in optimism between the two groups; optimism affects organizational commitment and among social supports, affectionate support and interaction support affect organizational commitment. Analyzing the path between the two groups, we first were able to find that optimism influenced organizational commitment for both groups, in relation to positive psychological capital. However, in terms of degree, South Korean workers were found to be strongly affected. Second, with regard to social support, we were not able to find that affectionate support and interaction support have a significant impact on organizational commitment for South Korean workers, while for North Korean refugees, we confirmed that both supports have a significant impact. Third, we were unable to find any differences between the two group, in terms of other sub-components of positive psychological capital (self-efficacy, hope, and resiliency) or the sub-components of social support (informational support, tangible support). These results suggest that companies or managers employing North Korean refugee workers need to create an organizational environment that allows them to perceive social support, especially affectionate support and interaction support.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.88-101
• /
• 2013

The International Convention for the Control and Management of Ship's Ballast Water and Sediments was adopted at 2004 and then various BWMS (ballast water management system) have been developed. In this study, WET (whole effluent toxicity) test with algae (diatom) Skeletonema costatum as primary producer, invertebrate (rotifera) Brachionus plicatilis as 1st consumer and fish (olive flounder) Paralichthys olivaceus as predator, chemical analysis and ERA (environmental risk assessment) were conducted to assess the unacceptable effect on marine ecosystem by emitting the discharge water treated with AquaStar$^{TM}$ BWMS using electrolysis as main treatment equipment for removing the marine organisms in the ship's ballast water. The most sensitive test organism on discharge water treated with AquaStar$^{TM}$ BWMS was S. costatum that gave the NOEC value of 25.00%, LOEC value of 50.00% and 72hr-$EC_{50}$ value of 69.97% from WET test result for 20 psu salinity treated discharge water. NOEC and LOEC value of B. plicatilis and P. olivaceus exposed at 20 psu salinity treated discharge water were 50.00% and 100.00%, respectively. In the chemical analysis results, total number of substances produced by AquaStar$^{TM}$ BWMS was 18 which were bromate, 7 volatile halogenated organic compounds, 7 halogenated acetic acids, 3 halogenated acetonitriles and chloropicrin. Eighteen substances did not consider as persistence and bioaccumulative chemicals. Uncertainty of toxic property of 18 substances was high. PECs of 18 substances calculated by MAMPEC model were ranged from $4.58{\times}10^{-4}$ to $4.87{\mu}g\;L^{-1}$, PNECs of them were ranged from $1.6{\times}10^{-2}$ to $3.2{\times}10^2{\mu}g\;L^{-1}$. And, the PEC/PNEC ratio of 18 substances did not exceed 1. Therefore, ERA for produced substances indicate that the discharge water treated with AquaStar$^{TM}$ BWMS does not pose unacceptable effect on marine life. And $EC_{50}$ value of S. costatum on discharge water treated by BWMS using the electrolysis had positive correlation with initial TRO concentration, concentration and kind & level of HAAs.

• Radiation Oncology Journal
• /
• v.12 no.1
• /
• pp.27-31
• /
• 1994

There are a number of reports suggesting that there may be a correlation between the clinical response to radiotherapy in various tumors and the clonogenic survival of cell lines derived from these tumors following exposure to 2 Gy(SF2). Authors conducted this study to determine SF2 for cells in primary culture from surgical specimens. The tumor tissues with squamous cell carcinoma of uterine cervix and head and neck were obtained. The tumor tissues were disaggregated to single cells by incubating with collagenase type w for 2 hours with constant stirring. Single cell suspensions were inoculated in four 24-well plates precoated with cell adhesive matrix. After 24 hours of incubation at 37$ ^{\circ}C $, rows of four wells were then irradiated, consisting of control set and five other sets each receiving doses of 1,2,3,4, and 6 Gy. After incubation for a total of 13 days, the cultures were stained with crystal violet and survival at each dose was determined by quantitative image analysis system, To determine whether cell growth was of epithelial origin, immunocytochemical staining with a mixture of cytokeratin and epithelial monoclonal antibodies were performed on cell cultures. During the period of this study, we received 5 squamous cell carcinoma specimens of head and neck and 20 of uterine cervical carcinoma. Of these, 15 yielded enough cells for radiosensitivity testing. This resulted an overall success rate of 60$ \% $. The mean SF2 value for 15 tumours was 0.55$\pm$0.17 ranging from 0.20 to 0.79. These results indicate that there is a broad range of sensitivities to radiation in same histologic type. So with a large patient population, we plan to determine whether a different SF2 value is associated with tumours that are controlled with radiotherapy than those that are not.

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.23-32
• /
• 2003

Genetic parameters for growth and carcass traits were estimated on the basis of the data from 3,415 heads of Hanwoo bulls tested at Livestock Improvement Main Center. The data were divided into two groups : the first period group consisted of 1,592 heads of bulls tested in individual pens from 1986 to 1990 and the second period group consisted of 1,823 heads of bulls tested in group pens from 1991 to 1996. The testing period was from 6 to 18 months of age in the first period group and 10 to 22 months of age in the second period group. The average daily gains during 6 to 12 months and 12 to 18 months were 1.01kg and 0.77kg, respectively, in the first period group and 0.80kg and 0.95kg in the second period group, and the compensated growth appeared to have occurred in the second period group. The heritability of body weight at 12 months estimated was 0.37 during the first period and 0.47 during the second period. The heritability of body weight at 18 months was 0.29 during the first period and 0.33 during the second period. The heritability of average daily gain during 6${\sim}$12 months estimated was 0.26 for the first period and 0.33 for the second period. The heritability of average daily gain during 12${\sim}$18 months estimated was 0.11 for the first period and 0.22 for the second period. The heritabilities of body weights and average daily gains estimated tended to be higher in the second period than in the first period. The heritability of body measurements at 12 months during the first period estimated was 0.30 for withers height, 0.25 for rump height, 0.11 for thurls width and 0.13 for chest girth. The heritability of body measurments at 12 months during the second period was 0.53 for withers height, 0.44 for rump height, 0.36 for thurls width and 0.56 for chest girth. The heritabilites of withers height, rump height, thurls width and chest girth at 18 months of age were 0.40, 0.22, 0.12 and 0.21 during the first period and 0.45, 0.42, 0.42 and 0.35 during the second period, respectively. The heritability of carcass traits estimated during the first period was 0.11 for carcass weight, 0.24 for dressing percent, 0.25 for eye muscle area, 0.18 for backfat thickness and 0.21 for carcass length. The heritabilities of carcass weight, dressing percent, eye muscle area, backfat thickness, carcass length and marbling score during the second period estimated were 0.32, 0.52, 0.33, 0.51, 0.58 and 0.31, respectively. The genetic correlations between the first and second periods estimated were higher than 0.8 for chest girth at 12 months, rump height at 18 months, carcass weight and dressing percent, but were lower for other traits.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.