• Korean Journal of Environmental Biology
• /
• v.17 no.4
• /
• pp.439-448
• /
• 1999

To investigate the population dynamics and survival of Genus Vibrio, population densities of aerobic saprophytic bacteria and Vibrio groups were measured 4 times in the intertidal waters of the Yellow Sea near Kunsan from November, 1997 to June, 1998. The distribution of heterotrophic bacteria during the survey periods by plate count and direct count method ranged from 1.2$\pm$0.6$\times$10$^3$~2.0$\pm$1.5$\times$10$^4$CFU ml­$^1$and from 6.0$\pm$4.0$\times$10$^{5}$ ~1.9$\pm$1.5$\times$10$^{7}$ cells ml­$^1$, respectively. Vibrio groups were distributed in the range of 1$\times$10 and 6$\pm$2.2$\times$10$^2$CFU ml­$^1$. The proportion of Vibrio groups to total heterotrophic bacteria was between 0.1 and 6% during the survey periods. A total of 51 isolates was obtained from TCBS agar plates and identified to species level by Biolog Identification System$^{TM}$. As a result, dominant genera were V, mediterranei, V aitguillarum, tr metschnikovii, and V. parahaemolyticus, and isolates were clustered into 26 groups based on the relatedness of average linkage clustering method at 70% level. As for the susceptibility of 51 isolates to 7 kinds of antibacterial agents (gentamicin, ampicillin, chlorarnphenicol, streptomycin, kanamycin, tetracycline, carbenicillin), 96% of isolates showed high resistance to more than one antibiotics and 65% of isolates contained a plasmid, of which size was observed greater than 12 kb, The number of cells of 3 tested strains (V. anguillarum, V. vulnificus, and V. metschnikovii) in filtered aged seawater decreased by approximately 1 to 5 orders of magnitude during 30-d incubation. In most cases, the numbers of cells decreased rapidly until day 3, then decreased slowly by day 30. The number of cells incubated at 15$^{\circ}C$ showed higher survival than those at 4$^{\circ}C$ and $25^{\circ}C$. These results may be considered for the basic supporting data in the risk assessment of vibriosis in summer.r.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.10-24
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.82-89
• /
• 2013

Harvest is one of the major disturbances affecting the soil carbon (C) dynamics in forests. However, researches on the long-term impact of periodic harvest on the soil C dynamics are limited since they requires rigorous control of various factors. Therefore, we adopted a modeling approach to determine the long-term impacts of harvest interval, harvest intensity and post-harvest residue management on soil C dynamics by using the Korean Forest Soil Carbon model (KFSC model). The simulation was conducted on Pinus densiflora S. et Z. stands in central Korea, and twelve harvest scenarios were tested by altering harvest intervals (50, 80, and 100-year interval), intensities (partial-cut harvest: 30% and clear-cut harvest: 100% of stand volume), and the residue managements after harvest (collection: 0% and retention: 100% of aboveground residue). We simulated the soil carbon stock for 400 years for each scenario. As a result, the soil C stocks in depth of 30 cm after 400 years range from 50.3 to 55.8 Mg C $ha^{-1}$, corresponding to 98.1 to 108.9% of the C stock at present. The soil C stock under the scenarios with residue retention was 2.5-11.0% higher than that under scenarios with residue collection. However, there was no significant impact of harvest interval and intensity on the soil C stock. The soil C dynamics depended on the dead organic matter dynamics derived from the amount of dead organic matter and growth pattern after harvest.

• Journal of Music and Human Behavior
• /
• v.4 no.2
• /
• pp.1-17
• /
• 2007

Huge growth in developmental level, new accomplishment, and The period of adolescents is not only the transition stage but also improvement of academic level. In this level of stage, adolescents have difficulties in development, so they show psychological abnormality such as stress and depression. They could develop mental disorder such as depression or anxiety if they do not overcome the abnormality. According to the situation of the insufficiency of the decent program for adolescents' mental health in the current society, we are strongly requested to develop the psycho-therapeutic program for them. Therefore, in this study, we examined the effect of the musical activities as blues music structure on the improvement of the Self-Efficacy in the female middle school students who have depressive tendencies as well as what they experienced through the activities. The 3 participants were selected out of 70 students in the first year at the "D" middle school in Seoul by being tested with Child Depression Inventory(CDI) and Self-Efficacy Scale(SES). The musical activities were built with 3 steps. Of which, the first one was the introduction to each other, the formation of rapport, and induction of their interests to the musical activities through blues. The second one was letting participants learn the blues music structure by practice and play assigned music(including improvisation) during later 5 sessions with different difficulties at each session. The third one was giving them opportunities to play a music out of the acquired ones during the session or creative music by their own, which results in maximizing musical activities and an acquired experience. As a result, first of all, the scores of CDI test of 3 participants in 10 time sessions showed slight changes, suggesting the negative correlation between CDI and SES even though changes were not big differences. Secondly, the scores of SES test of 3 subjects in 10 time sessions were all changed and especially preference for tasking was significant. Thirdly, the scores of SES for musical playing test of 3 participants in 10 time sessions were all changed and especially preference for musical tasking was significant shown. Finally, according to answers of 3 participants in 10 time sessions for the after questionnaire on musical activities, participants experienced affirmative self-confidence and positive emotion. Taken together, it was suggested that musical activities using blues music structure could be promising therapeutic intervention method.

• The Journal of Korean Physical Therapy
• /
• v.18 no.4
• /
• pp.61-70
• /
• 2006

Purpose: The purpose of this study was to investigate the activities of daily living (ADL) and instrumental activities of daily living (IADL) of residential home dwelling elderly and home for the aged dwelling elderly. In attempt to address medical professional caring the elderly, this comparative study examines the factors associated with dependence in the ADL and IADL in two samples of elderly people living in two different environments. Methods: The instrument of ADL and IADL widely used Katz ADL and IADL. Katz ADL and IADL was not a perfect fit for Korean. In concern with cultural factors Won developed K(Korean)-ADL and K-IADL scale reflecting Korean's own language expression and cultural factors in year of 2002. The assessment tool of this study was K-ADL and K-IADL. Differences of ADL and IADL were tested for statistical significance using group t-test and x2 test for comparisons between the residential home dwelling elderly and the home for the aged dwelling elderly. Results: Comparison of assessment for K-ADL and K-IADL in two different dwelling types was significant. Performance of ADL and IADL depend upon their living environment such as social status, number of children, income, present illness as well as age group. This study also showed significant differences of performance in some activities of ADL and IADL between the elderly who live in their own home and live in home for the aged. Comparison of performance of ADL and IADL in different dwelling types revealed that only one item of ADL was significant but only one item of IADL was not significant. It means that IADL is more difficult activities in the home for the aged dwelling elderly than the residential home dwelling elderly. The coupled elderly has more independent in some ADL and IADL activities compared with the single elderly. Conclusion: Using K-ADL and K-IADL is more convenient for Korean elderly. Medical professional consider some factors like dwelling style, social status, existing diseases and disabilities in order to care the elderly and train him/her activities of daily living as well as instrumental activities of daily living. Medical professional, especially physical and occupational therapist emphasize the training items which are bathing of ADL and grooming, housework, preparing meals, laundry, traveling, public transportation, shopping, using telephone and taking medicine of IADL based on the result of this study.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2014

This study reviewed an application of water quality estimation using an Airborne Hyperspectral Imagery (A-HSI) and tested a part of Han River water quality (especially suspended solid) estimation with available in-situ data. The estimation of water quality was processed two methods. One is using observation data as downwelling radiance to water surface and as scattering and reflectance into water body. Other is linear regression analysis with water quality in-situ measurement and upwelling data as at-sensor radiance (or reflectance). Both methods drive meaningful results of RS estimation. However it has more effects on the auxiliary dataset as water quality in-situ measurement and water body scattering measurement. The test processed a part of Han River located Paldang-dam downstream. We applied linear regression analysis with AISA eagle hyperspectral sensor data and water quality measurement in-situ data. The result of linear regression for a meaningful band combination shows $-24.847+0.013L_{560}$ as 560 nm in radiance (L) with 0.985 R-square. To comparison with Multispectral Imagery (MSI) case, we make simulated Landsat TM by spectral resampling. The regression using MSI shows -55.932 + 33.881 (TM1/TM3) as radiance with 0.968 R-square. Suspended Solid (SS) concentration was about 3.75 mg/l at in-situ data and estimated SS concentration by A-HIS was about 3.65 mg/l, and about 5.85mg/l with MSI with same location. It shows overestimation trends case of estimating using MSI. In order to upgrade value for practical use and to estimate more precisely, it needs that minimizing sun glint effect into whole image, constructing elaborate flight plan considering solar altitude angle, and making good pre-processing and calibration system. We found some limitations and restrictions such as precise atmospheric correction, sample count of water quality measurement, retrieve spectral bands into A-HSI, adequate linear regression model selection, and quantitative calibration/validation method through the literature review and test adopted general methods.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.16-21
• /
• 2010

To acquire good image quality and to minimize unnecessary radiation dose to patients, it is important to ensure that the radiopharmaceutical administered is accurately measured. Quality control of radionuclide calibrators should be performed to achieve these goals. The purpose of this study is to support the quality control of radionuclide calibrators in nuclear medicine centers and to investigate the level of measurement accuracy of the radionuclide calibrators. 58 radionuclide calibrators from 45 nuclear medicine centers, 74 radionuclide calibrators from 58 nuclear medicine centers, and 60 radionuclide calibrators from 45 nuclear medicine centers were tested with I-131, Tc-99m and I-123, respectively. The results showed that 81% of calibrators for I-131, 61% of calibrators for Tc-99m and 67% of calibrators for I-123 were within ${\pm}5%$. 17% of calibrators for I-131, 20% of calibrators for Tc-99m and 15% of calibrators for I-123 had a deviation in the range 5%< $|{\Delta}|{\leq}10%$. 2% of calibrators for I-131, 19% of calibrators for Tc-99m and 18% of calibrators for I-123 had a deviation of $|{\Delta}|$ >10%. Follow-up measurements were performed on the calibrators whose error exceeded the ${\pm}10%$ limit. As a result, some of the calibrator showed an improvement and their deviation decreased below the ${\pm}10%$ limit. The results have shown that such comparisons are necessary to improve the accuracy of the measurement and to identify malfunctioning radionuclide calibrators.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.233-237
• /
• 2009

Background: Bupivacaine with fentanyl might be suitable as the spinal anesthesia for performing ambulatory surgery to treat varicose vein. Material and Method: Thirty patients who underwent spinal anesthesia for a varicose vein operation were enrolled in this study. They were classified into 2 groups of either fentanyl 25ug mixed with bupivacaine 4mg (group FB4) or bupivacaine 8mg (group B8). We compared the groups for the success of the analgesia, the recovery time from sensory and motor block, the side effects and the postoperative complications. Result: The groups did not differ significantly regarding the success of analgesia (13 of 15 [group FB4], 15 of 15 [group B8]). None of the patients were converted to general anesthesia due to surgical pain. None of the patients required medication for hypotension and/or bradycardia. The operative and nonoperative side effects of motor block (tested for by using a modified Bromage scale) was significantly lower in group FB4 than that in group B8, as checked at 2 hours after spinal anesthesia (p<0.05). Recovery from spinal block was significantly quicker in group FB4 than that in group B8 (p<0.05). The first voluntary micturition time did not differ significantly (6.5 hours v 4.5 hours [p=0.143]) between the groups, but a nelatone catheter was inserted into 2 of the group B8 patients due to dysuria. Conclusion: Adequate intraoperative analgesia and hemodynamic stability and faster mobilization were achieved using bupivacaine 4mg with fentanyl 25ug. Low dose spinal anesthesia with fentanyl is suitable for performing ambulatory surgery to treat varicose vein.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.148-156
• /
• 2009

Background: As cardiovascular operations become more complex and sophisticated, there is an increasing need for various bioprostheses for use as components of blood vessels and heart valves. We developed a fatigue stimuli test instrument to objectively evaluate the mechanical durability of a bioprosthesis, and we tested several currently known processing methods for bovine pericardium and we then compared the results. Material and Method: Fresh bovine pericardium was collected at the butcher shop with using aseptic technique, and each piece of pericardium was fixated and/or decellularized by 16 representative methods. We measured the permeability and compliance of the processed bovine pericardium samples, and measured them again after exposure to the fatigue stimuli. All the pieces of pericardium underwent microscopic examinations before and after the fatigue stimuli. Result: A mixture of glutaraldehyde and solvent treatment showed better mechanical durability than did the single glutaraldehyde treatment. High concentration glutaraldehyde treatment showed equal or no worse results than did low concentration glutaraldehyde treatment. After SDS (sodium dodecylsulfate) decellularization, the mechanical property of the bioprosthesis became much worse ($20{\sim}190$ times) and the mechanical durability to the fatigue stimuli was also very poor. Conclusion: We obtained the basic durability data after various fixation methods with using a home-made fatigue test instrument.