• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2003

Optical fiber has many advantages, such as high reliability, long lifetime, immunity to the electromagnetic interference, high speed response and low cost. In this study, we proposed and developed an optical fiber impact and pressure sensor for prevention of accident which occurs in the automatic system or auto door. The principle of the sensor is to detect different optical intensity caused by variation of a speckle pattern due to the external perturbation. Speckle pattern appears at the end of a multimode fiber in which coherent beam propagates. The fabricated sensor in this study was tested. As a result of experiments, amplitude of the output signal isn't linear, but it has sufficient sensitivity for a sensor. Moreover, we can control sensitivity of the sensor by an amplifier at receiver. It has several advantages which are ability of detection at all point on the multimode fiber, large sensitive area, and many application areas for a sensing impact and pressure.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.149-154
• /
• 2006

In this paper, for auto temperature-controlled, we developed a system that an adaptive fuzzy controller using fuzzy control rule base, fuzzy variable and fuzzy inference can get same results as an expert of temperature -controlled gas furnace system by experience and obtained a good result by experiment. It's results showed that temperature error is less than ${\pm}2^{\circ}C$ and widely used in the area of industrial fields. For measurement of error rate of sintered ceramic products between the manual system and the proposed system, we tested two times sample A and B respectively. We verified the improvement of error rate was mean 50.5% and 48.4% for each sample A and B. Through the experiments, we confirmed that it has very superior performance compared with the conventional gas furnace system by manual.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.14 no.2
• /
• pp.262-272
• /
• 2008

Purpose: This study examined the validity and reliability of the Korean version of the Revised Process of Change for Weight Control Scale (POC-WCS) in adults with metabolic syndrome. Method: A methodological research design with an exploratory factor analysis for validity and correlational coefficients for reliability was used. The Korean version of the Revised POC-WCS was translated into Korean and a translation equivalency was obtained. It was tested with one hundred and fifty-one obese adults with metabolic syndrome in a university hospital. The data were analyzed using Cronbach's alpha and Guttman coefficients and a principal component factor analysis with SPSS/WIN 12.0. Result: The factor analysis identified eight factors explaining 64.7% of the total variance. The Korean version of the Revised POC-WCS included stimulus control (9 items), dramatic relief (6 items), reinforcement management (6 items), helping relationships (4 items), consciousness raising (3 items), self liberation (3 items), self reevaluation (3 items), and social liberation (4 items). The internal consistency was acceptable with Cronbach's alpha (.94) and Guttman coefficient (.92). Conclusion: The Korean version of the Revised POC-WCS had adequate validity and reliability in adults with metabolic syndrome. It can be used to assess the strategies and processes for weight control in a variety of populations with obesity.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2013

This paper describes the experimental study on the structural behavior of the vertical plane connection between a reinforced concrete wall and a steel plate concrete wall under out-of-plane flexural loads. The specimen was tested under a dynamic test with the use of cyclic loads. As a result of the test, ductile failure mode of vertical bars was shown under a push load and the failure load was more than that of the nominal strength of the specimen. However, the shear failure mode of the connection was confirmed in case of a pull test and thus demonstrates a need for a shear reinforcement.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.25-34
• /
• 2013

The purpose of the this paper is experimentally to investigate flexural behavior of slabs with suspending the deck plate. The main experimental parameters are the depth and thickness of the deck plate, slab span, rebar and support conditions. Total number of six specimens were tested and manufactured in slabs under vertical load. Based on the results of the test, the flexural behavior for slabs is determined according to the vertical deformation of the slabs, regardless of the main experimental parameters. Bending rebar reinforcement in the rib cross-section specimens can be evaluated significantly higher initial stiffness, crack stiffness and flexural strength. Result of the comparison of the theory value appeared to be fairly well matched to average 1.05.

• Computers and Concrete
• /
• v.11 no.2
• /
• pp.93-104
• /
• 2013

The use of rock wool waste, an industrial by-product, in cement-based composites has positive effects on the environment because it reduces the problems associated rock wool disposal. The experiments in this study tested cement-based composites using various rock wool waste contents (10, 20, 30 and 40% by weight of cement) as a partial replacement for Portland cement in mortars. The pozzolanic strength activity test, flow test, compressive strength test, dry shrinkage test, absorption test, initial surface absorption test and scanning electron microscope observations were conducted to evaluate the properties of cement-based composites. Test results demonstrate that the pozzolanic strength activity index for rock wool waste specimens is 103% after 91 days. The inclusion of rock wool waste in cement-based composites decreases its dry shrinkage and initial surface absorption, and increases its compressive strength. These improved properties are the result of the dense structure achieved by the filling effect and pozzolanic reactions of the rock wool waste. The addition of 30% and 10% rock wool wastes to cement is the optimal amount based on the results of compressive strength and initial surface absorption for a w/cm of 0.35 and 0.55, respectively. Therefore, it is feasible to utilize rock wool waste as a partial replacement of cement in cement-based composites.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.574-578
• /
• 2001

The effects of seed soaking (8 and 24 hours) and foliar spray of plant growth retardants (daminozide, chlormequat and uniconazole) on growth control in zinnia were investigated. For seed soaking of 'Dream Land Rose', the changes in plant height was not affected by seed soaking time (8 and 24 hours), while it was severely suppressed by high concentration of chemicals tested. An application of $125mg{\cdot}L^{-1}$ uniconazole was most effective for plant height suppression. Flowering was promoted by all treatments of chemicals. However, for 'Dream Land Scarlet', plant height control at 24 hours seed soaking showed more effective than 8 hours, and all treatments of chemicals decreased plant height. Uniconazole gave the best result for plant height control. Flowering tended to be hastened by the treatment of chemicals. For foliar spray, plant height was remarkably decreased at high concentration of uniconazole. Flowering was promoted by chlormequat and uniconazole in both 'Dream Land Rose' and 'Dream Land Scarlet'. Also, daminozide decreased number of petals.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.147-159
• /
• 2014

After 2008 global financial crisis, Korean housing market has experienced stagnation. So it caused housing market problems like housing price reduction, rising rent cost and so on. For housing market normalization government announced policies but Korean housing market didn't recover from stagnation. So, to understand why Korean housing market couldn't overcome the recession and why the policies didn't be effective, this research analyzed housing market participants (home owner, housing demand) based on the law of supply and demand and the psychological effect on their transaction intention based on behavioral economics(behavioral finance). Based on the analysis this research tested the effectiveness of announced policies using System Dynamics. The result showed that the amount of transaction and mortgage loan was influenced by the length of time to draft policies.

• Journal of The Korean Association For Science Education
• /
• v.36 no.1
• /
• pp.87-101
• /
• 2016

This study analyzes the content validity of descriptive tests developed for elementary schools, in order to acquire basic data to improve them. Various descriptive tests were collected and tested for differences in proportions between two-dimensional classification of educational objectives and the level of behavioral objectives. Results show that the descriptive tests developed by elementary school teachers mainly focused on "knowledge" and "understanding," and that content validity for behavioral levels to be low. Nine elementary school teachers were interviewed to understand the result. From the interviews, we found both internal and external factors that cause low content validity. The main internal factors were teachers' ability to make two-dimensional classification of educational objectives, the teachers' consideration of students' level, item level of difficulty, the ease of scoring, and path dependence. The main external factors were curriculum, parents, and administration. Based on the results, we suggested the factors related to elementary school teachers' PCK of descriptive tests.