• Journal of Haehwa Medicine
• /
• v.12 no.2
• /
• pp.1-9
• /
• 2004

1. Purpose Stroke is the most frequent cause of mortality and morbidity rate in Korea with coronary heart disease and cancer. The ischemic type of stroke is increasing tendency. The purpose of this studies is to examine the hematologic difference between cb infarction patients and Korean normal adults. 2. Method The study group consisted of neurologically confirmd 50 cb-infarction patients as the case group and 278 patients as control group that they had no significant result by CT through early examination of stroke in Cheonan oriental hospital of Daejeon university. We tested and compared RBC, hemoglobin, hematocrit, WBC, PT, PTT, total protein, albumin, total bilirubin, direct bilirubin, GOT GPT, $\gamma$-GTP, total cholesterol, triglyceride, HDL-C, glucose, BUN, creatinine, Na, K in the both group. 3. Result In the sample group(cb infarction group), there were many patients with low RBC count but no significant and with low hemoglobin, hematocrit(p<0.05). Thereas, increased WBC count and delayed PTT were showed respectively 20%, 36% in patient group, 7.9%, 4.7% in normal group(p<0.05). Comparing the LFT between cb infarction patients and normal adults, we founded significant cases with low HDL-C level, high glucose level, low potassium level in patient group(p<0.05). But the percentage of high total cholesterol level and triglyceride level were 18%, 29%(norma1 group), 20%, 28%(cb infarction group) respectively, there were no significant difference. 4. Conclusion In this study, we demonstrated that low HDL-C level and high glucose level is one of important risk factor of cb infarction. Also prospective studies are needed to evaluate many risk factor(hemoglobin, hematocrit, WBC, cholesterol, triglyceride, K, etc) of cb infarction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.1-15
• /
• 2017

The aim of this study is to plan a design that satisfies consumer needs by forecasting future properties following changes of gauge in basic Jacquard structure and to provide helpful data for a variety of knit-wear development. Four basic Jacquard knit samples (Normal Jacquard, Bird's eye Jacquard, Floating Jacquard, Tubular Jacquard) were selected and projected by using three types of gauges (7G, 12G, 14G) with an SES-122S type Computer Knitting machine of Shimaseiki MFG. Twelve different types of samples with Jacquards and gauges were tested on a flat table by measuring the course and wale in a 1cm area to calculate the gauge of samples. The mechanical properties of 12 types of Jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). As the result of comparing the number of patterns, courses and wales depending on the change of gauge of the basic Jacquard structure, it was observed that the number of patterns per specific length, course and wale has increased from 7G to 14G, a high-gauge. According to objective research regarding Jacquard structure, 7G Tubular Jacquard, which is low gauge, seems to be suitable for masculine design as it is heavy and thick, and has rigid and rough texture due to a high level of flexural strength and shear property. 14G Floating Jacquard, which is high gauge, seems to be suitable for feminine, silhouette design as it is light, thin, soft, flexible and has high drape. The result of this study provides a theoretical foundation for knit-wear development considering basic Jacquard structure and gauge-specific properties. This study can be used to provided directions for the development of knit industry.

• Journal of Hydrogen and New Energy
• /
• v.26 no.6
• /
• pp.541-546
• /
• 2015

Global energy shortage problem is expected to increase driven by strong energy demand growth from developing countries. Nuclear fusion power offers the prospect of an almost infinite source of energy for future generations. Hydrogen isotope storage and delivery system is a important subsystem of a nuclear fusion fuel cycle. Metal hydride is a method of the high-density storage of hydrogen isotope. For the safety storage of hydrogen isotope, depleted uranium (DU) has been widely proposed. But DU needs a safe test because It is a radioactive substance. The authors studied a small-scale DU bed and a medium-scale DU bed for the safety test. And then we made a large-scale DU bed and stored hydrogen isotopes in the bed. Before the hydriding/dehydriding, we tested it's heating and cooling properties and carried out an activation procedure. As a result, Reaction rate of DU-$H_2$ is more rapid than the other metal hydride ZrCo. Through the successful storage result of our large bed, the development possibility of the hydrogen isotope storage technology seems promising.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1494-1501
• /
• 2006

Mechanical and physical properties of a copper alloy for a liquid rocket engine(LRE) combustion chamber liner application were tested at various temperatures. All test specimens were heat treated with the condition they might experience during actual fabrication process of the LRE combustion chamber. Physical properties measured include thermal conductivity, specific heat and thermal expansion data. Uniaxial tension tests were preformed to get mechanical properties at several temperatures ranging from room temperature to 600$^{\circ}C$. The result demonstrated that yield stress and ultimate tensile stress of the copper alloy decreases considerably and strain hardening increases as the result of the heat treatment. Since the LRE combustion chamber operates at higher temperature over 400$^{\circ}C$, the copper alloy can exhibit time-dependent behavior. Strain rate, creep and stress relaxation tests were performed to check the time-dependent behavior of the copper alloy. Strain rate tests revealed that strain rate effect is negligible up to 400$^{\circ}C$ while stress-strain curve is changed at 500$^{\circ}C$ as the strain rate is changed. Creep tests were conducted at 250$^{\circ}C$ and 500$^{\circ}C$ and the secondary creep rate was found to be very small at both temperatures implying that creep effect is negligible for the combustion chamber liner because its operating time is quite short.

• Journal of Korean Academy of Nursing
• /
• v.3 no.1
• /
• pp.67-83
• /
• 1972

This study is designed to reveal the relationship of Army Nurses′ effectiveness to their perceptual orientation. Studies on nurses are very few despite of highly professional duties which deal with human lives. Effectiveness of nurses could be seen from both within and without. At present study, however, the researcher tried to work on the point of view of perceptual psychology. The study was designed !o fined the relationship of "Perceptual Orientation Scale"to their ratings training courses and experiences. The subjects are limited to nurses serving in the Army of the Republic of Korea. Many researches on nurses, such as Young Bok Lee(1970), Sook Ja Yoo(1971) Young Sook Hong (1970), Ik Do Choi (1966), are dealt with their attitude, morale, how to see their profession, adjustability and college lives, tut no one ever studied their subjective perceptual orientation. Method "Perceptual Orientation Scale"(Chunghoon Choy, 1971) was administered to 315 Army Nurses during the period of June to November 1971, and the relationship with their ratings by their supervising officers, training courses and their experiences were tested. All the relationship were calculated by the method of Chi-Squares. Result 1) There is no significant relationship between "Perceptual Orientation Scale" and their ratings. 2) There is no significant relationship between "Perceptual Orientation Scale" and their training courses. 3) There is no significant relationship between "Perceptual Orientation Scale" and their experiences. Conclusion As far as calculated result are concerned the research could not fined any Significant relationship. Therefore we can conclude that "Perceptual Orientation Scale"of the nurses has nothing to do with nurses effectiveness. It means the Army Nurses rating method has to be modified at once. Also we have to continue to fined mole significant effectiveness criteria and other researches be encouraged.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.665-674
• /
• 2000

In data parallel programs incurring high cache locality, the choice of grain sizes affects cache performance. Though the grain sizes chosen provide fair load balance among processors, the grain sizes that ignore underlying caching effect result in address interferences between grains allocated to a processor. These address interferences appear to have a negative impact on the cache locality, since they result in cache conflict misses. To address this problem, we propose a best grain size driven from a cache size and the number of processors based on direct mapped cache's characteristic. Since the proposed method does not map the grains to the same location in the cache, cache conflict misses are reduced. Simulation results show that the proposed best grain size substantially improves the performance of tested data parallel programs through the reduction of cache misses on direct-mapped caches.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.298-300
• /
• 2001

Haematococcus pluvialis was cultured autotrophically and mixotrophically for astaxanthin production in bubble column photobioreactors with $CO_2$ and/or acetate supplements. Four different schemes were tested using 5% $CO_2$ balanced with 95% $N_2$ at the aeration rate of 0.1 vvm and supplementation of acetate (l g/L) to the basal medium, MBBM. Average specific growth rates based on cell total volume of each case were 0.138 $day^{-1}$ in control (without $CO_2$ and acetate supplements), 0.125 $day^{-1}$ with only acetate supplementation, 0.315 $day^{-1}$ with only $CO_2$ supplement, 0.304 $day^{-1}$with both $CO_2$ and acetate. The growth rate under $CO_2$ supply was much higher than that without $CO_2$ supply. DCO and DO seemed to be a possible limitation factor. Another interesting observation was the growth rate under $CO_2$ supplement (without acetate) was higher than that under both $CO_2$ and acetate supply. This result is the opposite of the previously reported works. From the result, the existence of acetate may suppress the dark reaction of $CO_2$ fixation or photosynthesis. Conclusively, the growth of H. pluvialis under photoautotrophic condition found to be higher than that under mixotrophic condition.

• The Korea Journal of Herbology
• /
• v.20 no.4
• /
• pp.27-31
• /
• 2005

Objectives : The anticancer response of three different types of water extracts of Zingiberaceae Curcuma longa L. tested for sarcoma 180. Only few studies carried out to investigate the effects of other contents of Curcuma longa L. in anticancer activities, therefore, in this study we have investigated the effects of other component then curcumin in Curcuma longa L. for anticancer a activities. Methods : Three different types of water extracts of Curcuma longa L. were prepared as follows. The sarcoma cells (S180) were maintained in Dulbecco's modified Eagle's medium (DMEM) and were seeded on 24-well cell culture cluster flat bottom with lid tissue culture treated non-pyrogenic polystyrene. The growth of sarcoma 180 was monitored for 1, 2 and 5 days. The sarcoma cells were pictured using inverted microscope and cell density was counted using hemocytometry. Results : After 5 days in the culture medium the results showed high growth of sarcoma 180 for control condition and the surface of CCP plates were fully covered with the cells. In case of medium in which the 10% of filtered water extract of Curcuma longa L. was added a very limited growth of sarcoma 180 was observed. The results were showed only small difference in cell density for two different concentrations of unfiltered water extracts of Curcuma longa L. whereasin case of filtered water extracts the control of sarcoma growth shows better result. Conclusion : The filtered water extracts showed the best result relatively to the unfiltered water extracts for two different concentrations. This indicates that the water extracts of Curcuma longa L. can have anticancer activities possibly without curcumin.

• Environmental Mutagens and Carcinogens
• /
• v.21 no.1
• /
• pp.14-22
• /
• 2001

The detection of many synthetic chemicals used in industry that may pose a genetic hazard in our environment is of great concern at present. In this respect, administrative authorities has great concern to regulate and to evaluate the chemical hazard to environment and human health. The clastogenicity of 28 synthetic chemicals was evaluated in Chinese hamster lung fibroblast cells in vitro. Glycidylacrylate which is one of the most cytotoxic chemical among 28 chemicals tested revealed clastogenicity in the range of 0.31-1.25 $\mu\textrm{g}$/$m\ell$ both in the presence and absence of metabolic activation system. Neopentyl glycol (340-1360 $\mu\textrm{g}$/$m\ell$) also revealed weak positive result both in the presence and absence of metabolic activation system. Cyanoguanidine (/$420.5-841 $\mu\textrm{g}$m\ell$) and N-butylchloride ($231.5-926 $\mu\textrm{g}$/m\ell$) revealed weak positive result only in the absence of S-9 metabolic activation system. Nevertheless total aberration percentages of N-butylchloride in the presence of metabolic activation system, and 3,4＇-dichlorobenztrifluoride in the absence of S-9 metabolic activation revealed above 5% aberration, there is no statistical significance. From the results of chromosomal aberration assay with 28 synthetic chemicals in Chinese hamster lung cells, glycidylacrylate (CAS No. 106-90-0), neopentyl glycol (CAS No. 126-30-7), N-butyl chloride (CAS No. 109-69-3) and cyanoguanidine (CAS No. 461-58-5) revealed positive clastogenic results in this study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.305-310
• /
• 2013

In this paper, the pressure sensor usable in a high temperature, using a SDB(silicon-direct-bonding) wafer of Si/$SiO_2$/Si-sub structure was provided and studied the characteristic thereof. The pressure sensor produces a piezoresistor by using a single crystal silicon as a first layer of SDB wafer, to thus provide a prominent sensitivity, and dielectrically isolates the piezoresistor from a silicon substrate by using a silicon dioxide layer as a second layer thereof, to be thus usable even under the high temperature over $120^{\circ}C$ as a limited temperature of a general silicon sensor. The measured result for a pressure sensitivity of the pressure sensor has a characteristic of high sensitivity, and its tested result for an output of the sensor further has a very prominent linearity and hysteresis characteristic.