• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.601-612
• /
• 2019

As the $4^{th}$ industrial revolution is accelerating, IT convergence application technologies are attracting attention in various fields. In the manufacturing industry, Smart Factory technology, which is blended with IT technology, has been developed to solve the problem casued by the decrease of the labor force, and a monitoring server is required to remotely control the equipment or to inquire about the operation status of the factory. In this paper, we designed and implemented RESTful API for data sharing between factory equipment and monitoring server in Smart Factory. In order to verify the designed API, a testbed was operated for an actual plastics manufacturing plant. As a result, it was confirmed that the testbed can be operated normally in actual operating environment.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.208-212
• /
• 2003

An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the conceptual design results of the multi-mode pulsed Doppler radar system testbed model for helicopter. Due to the inherent flight nature of the hovering vehicle which is flying in low-altitude and low speed, as well as rapid maneuvering, the moving clutters from the platform should be suppressed by using a special MTD (Moving Target Detector) processing. For the multi-mode radar system model design, the flight parameters of the moving helicopter platform were assumed: altitude of 3 Km, average cruising velocity of 150knots. The multi-mode operation capability was applied such as short-range, medium-range, and long-range depending on the mission of the vehicle. The nominal detection ranges is 30 Km for the testbed experimental model, but can be expanded up to 75 Km for the long range weather mode. The detection probability of each mode is also compared in terms of the signal-to noise ratio of each mode, and the designed radar system specifications ate provided as a design results.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1037-1051
• /
• 2024

This paper presents the construction results and design of the UNIST Reactor Innovation platform for small modular reactors as a versatile testbed for exploring innovative technologies. The platform uses simulant fluids to simulate the thermal-hydraulic behavior of a reference small modular reactor design, allowing for cost-effective design modifications. Scaling analysis results for single and two-phase natural circulation flows are outlined based on the three-level scaling methodology. The platform's capability to simulate natural circulation behavior was validated through performance calculations using the 1-D system thermal-hydraulic code-based calculation. The strategies for evaluating cutting-edge technologies, such as the integration of a solid oxide electrolysis cell for hydrogen production into a small modular reactor, are presented. To overcome experimental limitations, the hardware-in-the-loop technique is proposed as an alternative, enabling real-time simulation of physical phenomena that cannot be implemented within the experimental facility's hardware. Overall, the proposed versatile innovation platform is expected to provide valuable insights for advancing research in the field of small modular reactors and nuclear-based hydrogen production.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.584-596
• /
• 2013

WSN (Wireless Sensor Network), to take advantage of the range was gradually expanded. So WSN access from public network to the desire to be increased. As a result, the test network environment for research has been progressing steadily. Because it requires a lot of sensor nodes, to establish of Testbed for WSN is difficult. in this paper suggests efficient integration test simulation environment of Testbed and Virtual environment for WSN. In addition to this paper suggests simulation environment able to integration of simulation time of Testbed and NS-3.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.167-176
• /
• 2006

In this paper, a home network access agent, which controls and monitors networked appliances at home using various terminals regardless of user's location, is designed and implemented. The proposed access agent integrates wire and wireless network on a home gateway (or home server) and is accessed with consistent messages using various terminals such as a web terminal, a PDA and a cellular phone. Also, in order to verify the operation and availability of the agent, a user interface for the various terminals is designed and a home network testbed which is accessed and controlled by the terminals is implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.87-90
• /
• 2009

Wireless Mesh Network(WMN) is wireless backbone networks technique which has ease of network configuration and cost of advantage. Recently, WNM released a new product, but most of existing research and technology analysis the performance through the simulation. This paper build the wireless mesh network testbed for actual situation. Testbed supports multi-channel multi-interface using bridge, the Wireless Distribution System and dynamic location-based routing protocol. This routing protocol strongly design against wireless interference using metric for link channel change and real distance. Then, the address of mesh clients assigned by the centralized address management server. Mesh clients is designed and implemented to manage network through Simple Network Management Protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1922-1930
• /
• 2015

This paper presents the system design, implement, and measurement results of the testbed for the wireless RF energy harvesting system. The developed testbed can be used for RF power transfer and data communication using the 2.4 GHz and 900 MHz frequency bands. It allows to evaluate the system performances for the RF power and data transmission. The testbed can also be used to develop algorithms for efficient energy harvesting.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.139-143
• /
• 2002

1990 년대 후반부터 다양한 디지털 통신망을 이용하여 멀티미디어 컨텐츠 서비스가 가능하게 되었다. 하지만, 멀티미디어 컨텐츠의 전달 및 이용을 위한 기반 구조들의 독자적 발전 및 다양한 통합적 관리 체계 시스템으로 인해, 멀티미디어 컨텐츠 표현 방식의 호환성 문제, 혼재하는 네트워크 전달 방식과 단말 방식의 호환성 문제 등의 잠재적인 문제점이 발생한다. 이런 문제의 대안으로 현재 존재하는 기술 및 기반 구조들 사이의 연동을 통한 큰 프레임워크인 MPEG-21이 진행 중이다. MPEG-21 의 목표는 표준화 목표를 구체화하는 것부터 진행하여, 최종적으로 “다양한 네트워크 환경과 단말기에 있어서, 투명하고 통합적으로 멀티미디어 자원의 이용을 가능하게 하는 것”이다. 본 논문에서는 현재 표준화 작업이 진행 중인 MPEG-21 을 기반으로 하는 Testbed를 제안한다. Testbed는 server, client, DIA(Digital Item Adaptation) 의 세 모듈로 구성된다. Server 의 역할은 멀티미디어 컨텐츠를 Digital Item(DI)으로 생성하고, client 가 DI를 요구할 경우 DIA 모듈을 통해서 변환된 DI를 client 에게 제공한다. DIA 모듈은 server 에서 동작되며 client로부터 요청된 DI를 분석하고 client로부터 전송된 환경 정보를 이용하여 client 환경에 적합하게 변환된 (adapted) DI를 생성하는 것이 주 기능이다. Client 는 server 에 저장되어 있는 DI를 선택하고 user preference, terminal capability 등의 필요한 정보를 server로 전송한다. Testbed 에서는 스포츠 경기의 동영상, 정지 영상, 경기 내용 역사를 기록한 파일 등의 DI를 이용한다. 표현 언어는 XML이며, HTTP 기반의 Web 환경에서 구동되도록 설계된다.스템 사이에 의미 있는 데이터 전송, 지식 획득을 위해 정보 기술 분야에서 활용해야 할 영역으로 XML Web Services, Multi-agent Systems, 전문가 컴뮤니티를 위한 그룹웨어 연구 개발에 관해 사례 중심으로 발표한다.다 신선한 공기를 넣어 주었을 때는 배의 발달이 많이 늦어져 배양 3주째에 다른 처리보다 배의 수가 훨씬 적었다. 체세포배가 발달하는 동안에는 산소를 많이 요구하지 않으나 성숙하는 동안에는 산소를 많이 요구하는 것으로 생각된다.적인 것으로 나타났다. 다만, 곡선형은 물론 직선형에서도 열교환 튜브의 배치밀도, 튜브 길이 및 두께 등의 변화에 따른 최적화 연구가 수반되어야 할 것으로 판단된다.에서 제공된 API는 객체기반 제작/편집 도구에 응용되어 다양한 멀티미디어 컨텐츠 제작에 사용되었다.x factorization (NMF), generative topographic mapping (GTM)의 구조와 학습 및 추론알고리즘을소개하고 이를 DNA칩 데이터 분석 평가 대회인 CAMDA-2000과 CAMDA-2001에서 사용된cancer diagnosis 문제와 gene-drug dependency analysis 문제에 적용한 결과를 살펴본다.0$\mu$M이 적당하며, 초기배발달을 유기할 때의 효과적인 cysteamine의 농도는 25~50$\mu$M인 것으로 판단된다.N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.할 때 약간의 증가