• Korean Journal of Acupuncture
• /
• v.21 no.4
• /
• pp.31-41
• /
• 2004

Background : The cun measurement system, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height. Conclusion : These findings suggest that the directional method is less likely dependable in locating acupoints than the proportional method because the influencing factors are different.

• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.202-206
• /
• 2014

In this study, the bacteriological survey was examined on ice creams at manufacturing factories in Korea during the summer season of 2011. The nineteen selected among 166 samples by preliminary test were collected from 11 different manufacturing factories in four major manufacturers in May 2011. Samples from ice milk, ice creams, sherbets, and non milk fat ice creams were tested for the total aerobic bacteria, coliform bacteria, and five food borne pathogens, respectively. The results showed that the coliforms including E. coli O157:H7, Salmonella spp., Staphylococcus aureus, Clostridium perfringens, and Listeria monocytogenes were not detected on all the ice creams. The total aerobic bacteria of the packed samples examined ranged between $2.5{\times}10^3$ and $5.5{\times}10^5cfu/g$. One ice cream, two sherbets, and four ice milk samples exceeded the acceptable limits of total aerobic bacteria according to the Korean standards for ice cream ($1.0{\times}10^5cfu/g$) and others ($5.0{\times}10^4cfu/g$). The levels of these microorganisms from ice creams were higher in three original equipment manufacturers than seven self-manufacturers. Three of ten ice creams (30.0%), three of six ice milks (50.0%), and one of two sherbets (50%) exceeded the acceptable limits of total aerobic bacteria, respectively. The personnel hygiene procedures with chocolate and vanilla chip addition from the manufacturing process were the main sources of the microbial contamination of stick-bar type ice creams when being produced in a factory. Improvement of the hazard analysis critical control points (HACCP) system should be introduced into the ice cream factory to improve the microbial quality of the ice cream products in Korea.

• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.181-188
• /
• 2014

The objective of this study was to analyze the microbiological hazards of Astragalus membranaceus Bunge on the post-harvest processing. Samples from processing equipments (cleaner, water, cart, table, tray and packaging machine), personal hygiene (hand) and harvested crops (before washing, after washing, after sorting, and after drying) were collected from four farms (A, B, C, and D) located in Chungchengbuk-do, Korea. The samples were analyzed for sanitary indication bacteria and pathogenic bacteria. First, total aerobic bacteria and coliform in processing facilities were detected at the levels of 0.93~4.86 and 0.33~2.28 log CFU/$100cm^2$ and/mL respectively. In particular, microbial contamination in hand (5.43~6.11 and 2.52~4.12 log CFU/Hand) showed higher than processing equipments. Among the pathogenic bacteria, Bacillus cereus was detected at the levels of 0.33~2.41 log CFU/$100cm^2$, 1.48~3.27 log CFU/Hand and 0.67~3.65 log CFU/g in equipments, hands, and plants and Staphylococcus aureus were detected in cleaner, table, hand and harvested crops (before washing and after sorting) by qualitative test. Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella spp. were not detected. These results indicated that personal hygiene and processing equipments should be managed to reduce the microbial contamination of A. membranaceus Bunge. Therefore, management system such as good agricultural practices (GAP) criteria is needed for hygienic agricultural products.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.401-408
• /
• 2001

The ethanol extract and n-hexane fraction of Commiphora molmol Engl. showed minimum inhibitory concentration of 50 ppm and 25 ppm, respectively, on 5 strains of Listeria monocytogenes at $32^{\circ}C$. The purified substance, C3-3-2 fraction, was isolated by silica gel column and preparative thin layer chromatography from n-hexane fraction of Commiphora molmol Engl. The C3-3-2 fraction showed a strong bactericidal activity on 5 strains of L. monocytogenes at the concentration of 10 ppm in tryptic soy broth medium. At that concentration, the viable count was reduced $5{\sim}6$ log cycle from initial cell number. The n-hexane fraction of Commiphora molmol Engl. showed strong growth inhibition at the concentration of 25 ppm on Bacillus cereus and Staphylococcus aureus, at 50 ppm in broth on Salmonella enteritidis, and at 500 ppm on Vibrio parahaemolyticus. The purified antimicrobial substance, the C3-3-2 fraction, was identified as m-nonylphenol by on the basis of the $^1H-,\;^{13}C-NMR$ and EI/MS data. For the application test, the C3-3-2 fraction which was purely isolated from Commiphora molmol Engl. at 100 ppm were applied to minced Alaska pollack and ground beef at $32^{\circ}C$ and $5^{\circ}C$. The antimicrobial substances did not reduce L. monocytogenes ATCC 19113 at $32^{\circ}C$, while they reduced L. monocytogenes ATCC 19113 in viable number at $5^{\circ}C$. However, the antimicrobial effect of C3-3-2 fraction in food system was lower than that of broth condition.

• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.123-130
• /
• 1977

A laboratory study was made to develop a simple and economic model method for the systematic determination of functional properties of 'Soy Protein Isolates (SPI)' prepared from defatted soybean meal. These are required to evaluate and to predict how SPI may behave in specific systems and such proteins can be used to simulate or replace conventional proteins. Data concerning the effects of pH, salt concentration, temperature, and protein concentration on the functional properties which include solubility, heat denaturation, gel forming capacity, emulsifying capacity, and foaming capacity are presented. The results are as follows: 1) The yield of SPI from defatted soybean meal increased to 83.9 % as the soybean meal was extracted with 0.02 N NaOH. 2) The suitable viscocity of a dope solution for spinning fiber was found to be 60 Poises by using syringe needle (0.3 mm) with 15 % SPI in 0.6 % NaOH. 3) Heat caused thickening and gelation in concentration of 8 % with a temperature threshold of $70^{\circ}C$. At $8{\sim}12\;%$ protein concentration, gel was formed within $10{\sim}30\;min$ at $70{\sim}100\;^{\circ}C$. It was, however, disrupted rapidly at $125\;^{\circ}C$ of overheat treatment. The gel was firm, resilient and self-supporting at protein concentration of 14 % and less susceptible to disruption of overheating. 4) The emulsifying capacity (EC) of SPI was correlated positively to the solubility of protein at ${\mu}=0$. At pH of the isoelectric point of SPI (pH 4.6), EC increased as concentration of sodium chloride increased. Using model system$(mixing\;speed:\;12,000\;r.p.m.,\;oil\;addition\;rate:\;0.9\;ml/sec,\;and\;temperature\;:\;20{\pm}1\;^{\circ}C)$, the maximum EC of SPI was found to be 47.2 ml of oil/100 mg protein, at the condition of pH 8.7 and ${\mu}=0.6$. The milk casein had greater EC than SPI at lower ionic strength while the EC of SPI was the same as milk casein at higher ionic strength. 5) The shaking test was used in determining the foam-ability of proteins. Progressively increasing SPI concentration up to 5 % indicated that the maximum protein concentration for foaming capacity was 2 %. Sucrose reduced foam expansion slightly but enhanced foam stability. The results of comparing milk casein and egg albumin were that foaming properties of SPI were the same as egg albumin, and better than milk casein, particularly in foam stability.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.177-180
• /
• 2010

Purpose: As PET test came to be covered by the pay system of medical insurance (July 1, 2006) and the needs for it becoming increased for laboratory purpose, it became necessary to purchase expensive medical equipments to solve those problems. However, as most of equipments that are operated by cyclotron are very expensive as to amount from tens of millions up to hundreds of millions of won, it is difficult to purchase those equipments from the point of medical organizations. It may be possible to self manufacture those equipments with least costs if their parts functions that meets the operators demands. The Nuclear Medicine department of National Cancer Center (NCC) is trying to manufacture and use equipments that can be made with least costs, including introducing 2 medical equipments that can improves the operator's works. Materials and Methods: Example 1: Self production of radioisotope($^{18}F$) divider was fabricated. The NCC's Nuclear Medicine department acquired one acrylic panel, seven 3-way valve, tubing etc. that can be found in the market to make the main body of divider in cooperation with biomedical engineering, and placed them inside hot cell, and installed switching box outside of hot cell to make it possible to control them from outside. This main body of divider were placed in radioisotope transfer line that are manufactured in the cyclotron. Example 2: Self production of $^{18}F$-FDG automated divider was fabricated. The NCC's Nuclear Medicine department used cavro pump syringe that consists the main body of divider in cooperation with biomedical engineering, biomedical engineering developed programs that divides a certain amount. $^{18}F$-FDG automated divider is placed inside hot cell, and cable chords were used in the equipment, and then it was connected to PC outside hot cell to make it possible to control the $^{18}F$-FDG automated divider. Results: From the NCC's Nuclear Medicine department tests that were carried out from March, 2007 until now, we found out that radioisotope can be sent to radiopharmaceuticals composite module we want, and from the tests that are carried out at NCC's Nuclear Medicine department using $^{18}F$-FDG automated divider since August, 2009 it was possible to distribute radiopharmaceuticals into vial intended. Conclusion: Through the two examples above, we found out that costs can be reduced by self manufacturing expensive equipments from NCC's cyclotron room with least costs. Also, it decreased radiation exposure dose on workers, and set up problem solving processes in cooperation with lots of parties related.

• Korean Journal of Pharmacognosy
• /
• v.3 no.3
• /
• pp.151-160
• /
• 1972

Recent achievements of scientific research on the pharmacologic activities and the chemical problems of dammalene glycosides, which are considered to be effective principles of Korean ginseng, are reviewed and analyzed in view of structure-activity relationship. 1) S. Shibata and his co-workers detected 12 glycoside spots of dammalene series on the two dimensional T.L.C. of total glycoside fraction from Japanese ginseng, and designated them Ginsenoside Rx(x=a, b, c, g, h, etc.) in the order of increasing Rf-value. The aglycones of those glycosides were characterized to be protopanaxadiol for the Ginsenoside $Rx(x=a,\;b_{1},\;b_{2},\;c,\;d,\;e,\;f)$ and protopanaxatriol for the Ginsenoside $Rx(x=g_{1},\;g_{2},\;g_{3},\;h_{1}\;'h_{2})$. Using Korean ginseng as the material for our study, the author and his coworkers isolated a new dammalene glycoside(Panax Saponin C), which comes under the category of protopanaxadiol glycosides based on the classification of S. Shibata et al., and characterized this saponin to be the glycoside of protopanaxatriol series. Furthermore, Panax Saponin C dissociated into $two\;components(C_{1}\;and\;C_{2}-acetate)$ by acetylation, both of which returned to original Panax Saponin C by deacetylation. Based on this result, more than 13 glycoside components of dammalene series will be expected in the Korean ginseng. 2) The structures of protopanaxadiol and protopanaxatriol, the genuine aglycones of dammalene glycosides, are fully established to be structural analogues by S. Shibata and his co-workers, therefore antagonistic and/or analogical activities will be expected for the pharmacologic activities of these glycoside series of structural analogues. K. Takaki and his co-workers found central nervous system (CNS) stimmulant activity from the glycosides of protopanaxatriol series and CNS-depressant activity from the glycosides of protopanaxadiol series. On the other hand, the author and his co-workers found stimmulating activity on the protein synthesis from both the series of dammalene glycosides with delayed and long-lasting characteristics. This delayed and long-lasting characteristics were also observed in the anti-inflammatory activity of glycosides of protopanaxatriol series on their time course tendency. For the convenience's sake of argument, pluralistic pharmacologic activities of dammalene glycosides, which were observed by many workers at various pharmacologic site, may be classified into two main categories; one is pan-cellular activity and the other is organ specific activity to the certain tissue which is a mass of cells differentiated to a certain direction for their special functions in the body. Based on the data of K. Takaki and those of the authors, following assumption will be probable; Pharmacologic activities of both series of glycosides of protopanaxadiol and protopanaxatriol aglycones may be antagonistic on their tissue-specific activities and analogic on their pan-cellular activities. Therefore, the mixture of these two series of glycosides in an appropriate ratio, as the case of total extract of Korean ginseng, will be probably beneficial to the host by increasing the synthesis of some functional proteins, due to the additive action of pan-cellular activity, and with the disappearance of any significant behavioral symptoms due to the antagonism of tissue specific activity. This fact will probably be the main reason why classical trials of pharmacologists failed in re-discovering the efficacy of Korean ginseng with their behavioral test. 3) The author and his co-workers achieved the synthesis of $C^{14}-labelled\;Panax\;Saponin\;A\;on\;C_{25}-C_{27}\;position\;of\;aglycone$ in the interest of tracer studies in vivo. The method will be applicable to other dammalene glycosides regardless of their chemical structure. 4) The author and his co-workers converted chemically betulafolienetriol, a triterpene component of Betula platyphylla, to the protopanaxadiol, one of genuine aglycone of dammalene glycosides.

• Pediatric Infection and Vaccine
• /
• v.8 no.2
• /
• pp.150-159
• /
• 2001

Purpose : We need to reconsider booster vaccination schedule of Japanese encephalitis vaccination. To do that we evaluate the long-term immunogenicity and the incidence of adverse events with inactivated mouse brain derived Nakayama Japanese encephalitis vaccine. Methods : We tested neutalizing antibody for 311 elementary school students by plaque reduction neutralizing test(PRNT) at USAMC-AFRIMS(United States Armed Forces Research Institute of Medical Science/Department of Virology). We evaluated vaccine related adverse events by spontaneous reporting prospectively among 15,487 vaccinees who were vaccinated at public health center and 2,277 elementary school students who were immunized previously by a questionnaire and school health record. Results : According to the time interval from the last booster injection of 311 children, PRNT antibody titers gradually decreased as the interval increased; 239 mIU/mL, 188 mIU/mL, 134 mIU/mL, 49 mIU/mL each at 6, 18, 30, 42 months after the last booster injection. The seropositivity rates were 98%, 99%, 95.6%, 71.4% each at 6, 18, 30, 42 months after the last booster injection. There were 21(0.13%) cases with systemic reactions among 15,487 vaccinees who had visited the hospital by prospective passive reporting system at public health center. According to the questionnaires and school health records in elementary school students, local induration and pain were 17.4% and 14.8%, respectively. Systemic reactions including fever, vomiting, rash were reported in few cases. Conclusion : Biannual booster vaccination that has been recommended so far should not be necessary. Surveillance for adverse events with inactivated mouse brain derived Nakayama vaccine should be strengthened to better assess the number of cases and reactions associated with immunization.

• Radiation Oncology Journal
• /
• v.24 no.2
• /
• pp.110-115
• /
• 2006

Purpose: This study was performed to determine the prognostic factors influencing relapse pattern, overall and disease-free survival in patients treated with postoperative radiotherapy for endometrial carcinoma. Materials and Methods: The records of 54 patients with endometrial adenocarcinoma treated postoperative radiotherapy at Pusan National University Hospital between April 1992 and May 2003 were reviewed retrospectively. Median age of the patients was 55 (range $35{\sim}76$). The distribution by surgical FIGO stages were 63.0% for 0Stage I, 14.8% for Stage II, 22.2% for Stage III. All patients received postoperative external radiotherapy up to $41.4{\sim}54Gy$ (median: 50.4 Gy). Additional Intravaginal brachytherapy was app led to 20 patients (37.0% of all). Median follow-up time was 35 months ($5{\sim}115$ months). Significant factors of this study: histologic grade, Iymphovascular space invasion and myometrial invasion depth were scored (GLM score) and analyzed. Survival analysis was peformed using Kaplan-Meier method. The log-rank test was used for univariate analysis and the Cox regression model for multivariate analysis. Results: 5-year overall and disease-free survival rates were 87.7% and 871%, respectively. Prognostic factors related with overall and disease-free survival were histologic grade, Iymphovascular space invasion and myometrial invasion according to the univariate analysis. According to the multivariate analysis, Iymphovascular space invasion was associated with decreased disease-free survival. GLM score was a meaningful factor affecting overall and disease-free survival (p=0.0090, p=0.0073, respectively) and distant recurrence (p=0.0132), which was the sum of points of histologic grade, Iymphovascular space Invasion and myometrial invasion. Total failure rate was 11% with 6 patients. Relapse sites were 2 para-aortic Iymph nodes, 2 lungs, a supraclavicular Iymph node and a vagina. Conclusion: The prognosos in patients with endometrial carcinoma treated by postoperative radiotherapy was closely related with surgical histopathology. If further explorations confirm the system of prognostic factors in endometrial carcinoma, it will help us to predict the progression pattern and to manage.