• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1060-1068
• /
• 2018

Study Design: Retrospective study. Purpose: Lumbar intervertebral disc degeneration is an important cause of low back pain. Overview of Literature: Spinal fusion is often reported to have a good course for adolescent idiopathic scoliosis (AIS). However, many studies have reported that adjacent segment degeneration is accelerated after lumbar spinal fusion. Radiography is a simple method used to evaluate the orientation of the vertebral column. magnetic resonance imaging (MRI) is the method most often used to specifically evaluate intervertebral disc degeneration. The Pfirrmann classification is a well-known method used to evaluate degenerative lumbar disease. After spinal fusion, an increase in stress, excess mobility, increased intra-disc pressure, and posterior displacement of the axis of motion have been observed in the adjacent segments. Methods: we retrospectively secured and analyzed the data of 15 patients (four boys and 11 girls) with AIS who underwent a spinal fusion surgery. We studied the full-length view of the spine (anterior-posterior and lateral) from the X-ray and MRI obtained from all patients before surgery. Postoperatively, another full-length spine X-ray and lumbosacral MRI were obtained from all participants. Then, pelvic tilt, sacral slope, curve correction, and fused and free segments before and after surgery were calculated based on X-ray studies. MRI images were used to estimate the degree to which intervertebral discs were degenerated using Pfirrmann grading system. Pfirrmann grade before and after surgery were compared with Wilcoxon signed rank test. While analyzing the contribution of potential risk factors for the post-spinal fusion Pfirrmann grade of disc degeneration, we used generalized linear models with robust standard error estimates to account for intraclass correlation that may have been present between discs of the same patient. Results: The mean age of the participant was 14 years, and the mean curvature before and after surgery were 67.8 and 23.8, respectively (p<0.05). During the median follow-up of 5 years, the mean degree of the disc degeneration significantly increased in all patients after surgery (p<0.05) with a Pfirrmann grade of 1 and 2.8 in the L2-L3 before and after surgery, respectively. The corresponding figures at L3-L4, L4-L5, and L5-S1 levels were 1.28 and 2.43, 1.07 and 2.35, and 1 and 2.33, respectively. The lower was the number of free discs below the fusion level, the higher was the Pfirrmann grade of degeneration (p<0.001). Conversely, the higher was the number of the discs fused together, the higher was the Pfirrmann grade. Conclusions: we observed that the disc degeneration aggravated after spinal fusion for scoliosis. While the degree of degeneration as measured by Pfirrmann grade was directly correlated by the number of fused segments, it was negatively correlated with the number of discs that remained free below the lowermost level of the fusion.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.44-51
• /
• 2018

As the LNG storage tank is aged, if there is a crack in the outer wall concrete or corrosion of the reinforcing steel, there is a risk of a major accident such as collapse of the structure depending on the type and degree of damage. Since 2014, LNG storage tanks have undergone precise safety diagnosis and safety inspection has been carried out. The condition evaluation criteria for each component have been revised and applied in January 2016. The condition evaluation standard is to evaluate the status of storage tanks based on the appearance survey and material test results of LNG storage tanks and it is important for maintenance. In addition, the representative condition evaluation standard that shows the comprehensive state of each LNG storage tank is important in maintenance, but the related standard for LNG storage tank outer concrete is not available in Korea and abroad, and development of the condition evaluation standard is necessary. In this paper, we examined the structural characteristics of LNG storage tanks, analyzed the status of the condition evaluation criteria for each member, and developed a comprehensive status rating system by weighting the members. We used the AHP(Analytic Hierarchy Process) technique and developed a representative conditon evaluation criteria through surveys of professional organizations.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.237-244
• /
• 2018

In this study, to increase the survival rate of frozen/thaw rooster semen, standard protocols of semen thawing procedures were tested by computer-assisted sperm assay (CASA). We tested 4 different thawing protocols for frozen semen, $5^{\circ}C$ for 2 min, $35^{\circ}C$ for 30 s, $54^{\circ}C$ for 13 s, and $70^{\circ}C$ for 7 s. The pooled semen from 5 to 8 Ogye rooster line was diluted in the HS-1 diluent and frozen in 8% methylacetamide (MA) in liquid nitrogen vapors. To determine standard thawing method, straws were plunged into different temperatures and times. The resulting motilities were recorded by the CASA system. The results of this study showed that the best viability of the spermatozoa was shown by exposure at $5^{\circ}C$ for 2 min. Moreover, the longevity test of thawed sperm at $5^{\circ}C$ for 2 min also supported the higher viability under low temperature preservation of $17^{\circ}C$ for 1 hr. Further research is needed to increase the motility of thawed rooster semen for field application. In addition, the in vivo tests for different rooster lines are also needed for the establishment of avian genetic resource bank.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.448-456
• /
• 2019

The purpose of this study is to develop basic data for the prevention of shipboard disasters and measures to improve the safety and health of seafarers by using a survey on the safety and health activities of seafarers. The questionnaire was administered to 437 people who have worked on a ship in the last six months. According to the results from the analyses (t-test, crosstab, and ANOVA), the level of safety and health activities of seafarers averaged at 68.82 points. The workplace clearance was the highest at 76.08 points, and the safety and health management system were the lowest at 62.78 points. As a result of the differences in the level of safety and health activities, the number of marine workers was higher than workers on land, and higher education was higher than lower education (p<0.01). It was higher for workers in coastal zones than for those in pelagic areas, and special cargo ships were higher than other ship types (p<0.01). Larger ships had a higher number of activities than small ships, and ships that were less than five years old had more activities (p<0.01). Therefore, in order to raise the level of safety and health activities of seafarers, it is necessary to develop safety and health education programs that take individual, job, and ship characteristics into consideration, and promote active safety and health activities on ships.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.159-167
• /
• 2019

This study aimed to evaluate the effects of oral rinsing solution on the color stability, surface microhardness and surface roughness change of composite resin. In this in-vitro study, 80 disc-shaped specimens were fabricated of Filtek P60 and Filtek Z250(A2 shade). The samples of each group were randomly divided into eight subgroups (n=10). The baseline color values ($L^*$, $a^*$, $b^*$) of each specimen were measured according to CIE LAB system using a colorimeter. After baseline color measurements, the control samples were immersed in distilled water and the test groups were immersed colorless, green and purple mouthrinses three times a day for thirty minutes. This process was repeated for two weeks. Green and purple oral rinsing solutions displayed color, microhardness and roughness change of all composite resin after immersion in the mouthrinses. Therefore, prescription of oral rinsing solution for a minimum of two weeks is a common practice, which may cause discoloration of aesthetic composite restorations of patients.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.357-363
• /
• 2019

This study was conducted to develop a stem volume table for Quercus acutissima in Korea by using Kozak's stem taper equation. In total, 2700 tree samples were collected around the country, and growth performance was investigated through compiling data on diameters by stem height and stem analysis. In order to test the stem taper equation's fitness, the fitness index (FI), bias, and mean absolute deviation (MAD) were analyzed. The fitness of the equation was estimated at 97%, bias as 0.017, and MAD turned out to be 1.118, respectively. Furthermore, there was a statistically significant volume difference between the current volume table and the new volume table (p = 0.0008, <0.005). The result indicates that using the new volume table that reflects the actual forest will reduce the loss when assessing wood resources and will improve the accuracy of forest statistics for national and local governments. A stem volume table, the main result of this research, which is utilized in the estimated stem taper equation, will provide growth information for Quercus acutissima, one of the main broadleaf species in Korea, and will function as a management indicator for rational forest management.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.85-101
• /
• 2019

Recently, thank to the popularization of light-weight drone through the significant developments in computer technologies as well as the advanced automated procedures in photogrammetry, Unmanned Aircraft Systems have led to a growing interest in industry as a whole. Documentation, maintenance, and restoration projects of large scaled cultural property would required accurate 3D phenomenon modeling and efficient visual inspection methods. The object of this study verify on the accuracies achieved of 3D phenomenon reconstruction as well as on the validity of the preservation, maintenance and restoration of large scaled cultural property by UAS photogrammetry. The test object is cltural heritage(treasure 1324) that is the rock-carved standing Bodhisattva in Soraesan Mountain, Siheung, documented in Goryeo Period(918-1392). This standing Bodhisattva has of particular interests since it's size is largest stone Buddha carved in a rock wall and is wearing a lotus shaped crown that is decorated with arabesque patterns. The positioning accuracy of UAS photogrammetry were compared with non-target total station survey results on the check points after creating 3D phenomenal models in real world coordinates system from photos, and also the quantified informations documented by Culture Heritage Administration were compared with UAS on the bodhisattva image of thin lines. Especially, tests the validity of UAS photogrammetry as a alternative method of visual inspection methods. In particular, we examined the effectiveness of the two techniques as well as the relative fluctuation of rock surface for about 2 years through superposition analysis of 3D points cloud models produced by both UAS image analysis and ground laser scanning techniques. Comparison studies and experimental results prove the accuracy and efficient of UAS photogrammetry in 3D phenomenon modeling, maintenance and restoration for various large-sized Cultural Heritage.

• Management & Information Systems Review
• /
• v.38 no.3
• /
• pp.55-80
• /
• 2019

Recently, many companies improving their management performance by building a powerful brand value which is recognized for trademark rights. However, as growing up the size of online commerce market, the infringement of trademark rights is increasing. According to various studies and reports, cases of foreign and domestic companies infringing on their trademark rights are increased. As the manpower and the cost required for the protection of trademark are enormous, small and medium enterprises(SMEs) could not conduct preliminary investigations to protect their trademark rights. Besides, due to the trademark image search service does not exist, many domestic companies have a problem that investigating huge amounts of trademarks manually when conducting preliminary investigations to protect their rights of trademark. Therefore, we develop an intelligent similar trademark search model to reduce the manpower and cost for preliminary investigation. To measure the performance of the model which is developed in this study, test data selected by intellectual property experts was used, and the performance of ResNet V1 101 was the highest. The significance of this study is as follows. The experimental results empirically demonstrate that the image classification algorithm shows high performance not only object recognition but also image retrieval. Since the model that developed in this study was learned through actual trademark image data, it is expected that it can be applied in the real industrial environment.

• Management & Information Systems Review
• /
• v.38 no.3
• /
• pp.127-136
• /
• 2019

With frequent incidents of unethical practices and acts in organizations, organizational leaders need to understand some of the causes that facilitate such negative organizational behaviors to lessen the chances of unethical behaviors from occurring. In an effort to understand some of the causes of unethical behavior, this study looks at competitive atmosphere and results-focused performance evaluation as some of the influencing factors on employees' tendency to decide to behave unethically. Competition culture can spur unethical behavior and evaluation culture with emphasis on results-focused which can create a perception among employees of a narrow view of work and how it is defined. The argument of this paper is that such characteristics can create environment for unethical behaviors and serve as an added push upon employees to choose to behave unethically. Collection of survey results from those working in Busan area were used to test the hypotheses using regression. Data analysis showed that in organizational atmosphere that is overly competitive and results-focused can influence employees to behave unethically. Implications and future research suggestions are discussed in conclusions.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass