• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.597-602
• /
• 2006

In this paper, a proper support tuning method is established by identifying the dynamic characteristics of the machine, the floor. and the inertia force. Also, the limitation of a passive isolation is presented. To simplify the dynamic analysis and to establish a proper design method for supporting system, each of the machine and the floor is modeled as a single degree of freedom spring-mass-damper system under careful investigation of the dynamic characteristics of each system and appropriate assumptions. Then, the dynamic behavior of a 2DOF system and the effect of the mass and the damping are investigated. Also, the characteristics of motion profiles are investigated. In addition, a quasi-static analysis on the transmitted force through support is performed and related tests are performed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.336-343
• /
• 2005

In the braced excavations, careful consideration must be given to the risks of progressive collapse of the entire support system due to failure of a single member. The existing connection methods of the excavation support system results in many problems during construction. To overcome these, simple joint method is proposed in this study. The full scale test and the numerical analysis using finite element method were performed to verify the safety of them. As results, simple joint method was good effective to increase strength. And it was good effective to decrease in numbers of bolt. Also, new method is cheaper than existing connection methods and a good construction as well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.615-616
• /
• 2006

Many manufacturing companies manage their production-related data for quality management and production management. Nevertheless, production related-data should be closely related to each other Stored data is mainly used to monitor their process and products' error. In this paper, we provide an enterprise-wide production data model for decision support system and product automation. Process data, quality-related data, and test data are integrated to identify the process inter or intra dependency, the yield forecasting, and the trend of process status. In addition, it helps the manufacturing decision support system to decide critical manufacturing problems.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.638-643
• /
• 2000

This study Is concerned with the development of design support program for deep drawing process. The present support program is designed to generate the layout drawings by utilizing the following key functions: analysis of product shape, generation of key stages by pattern database, determination of layout generation method, generation of layout. furthermore, from the results by process design program input data for simulation Is automatically generated with appropriate process parameters and connected seamlessly to carry out the finite element analysis so that the design can be checked for the possible problems in real manufacturing process. The designer can generate layout drawings and test the design by simulation quickly and conveniently In these system designer can verify and optimize the design. We tested this system for various type of product shape md found that the generated layout is in good agreement with the real cases.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.310-312
• /
• 2003

This paper discusses a GIS based decision support system that provides functions of prospect screening and evaluation in both technical aspects (Volume, structure, trap, reservoir and charge, etc.) and economic aspects (Net present value, Profit / investment Ratio, etc.). The decision support system has been tested in a virtual offshore exploration prospect to facilitate and improve the decision making process. The study represents a test bed for decision makers at all levels to establish prospect screening and evaluation guidelines that may be applicable to other related prospect investment issues.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.71-77
• /
• 2021

As the number of using road in Korea increases, maintenance costs and traffic congestion costs also increase. In order to reduce maintenance cost and time of road, existing long - lived modular road system has been proposed. In this study, the design and performance evaluation of the adaptable support module, which is the substructure of the proposed system, was performed. Two adaptable (Cross-Beam type)support modules were designed and fabricated to determine the load and shape. A adaptable support module was constructed and a static load test was carried out to select the type with better performance. As a result of the load test, the maximum value of the measured earth pressure difference is about 158 kPa and the settlement amount is about 0.032 mm in the two types of adaptable support modules. Based on these results, it is concluded that the performance of the adaptable support module of the bottom curved cross-beam type is better.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.422-432
• /
• 2019

A hybrid kernel function of support vector machine is proposed to improve the classification performance of power quality disturbances. The kernel function mathematical model of support vector machine directly affects the classification performance. Different types of kernel functions have different generalization ability and learning ability. The single kernel function cannot have better ability both in learning and generalization. To overcome this problem, we propose a hybrid kernel function that is composed of two single kernel functions to improve both the ability in generation and learning. In simulations, we respectively used the single and multiple power quality disturbances to test classification performance of support vector machine algorithm with the proposed hybrid kernel function. Compared with other support vector machine algorithms, the improved support vector machine algorithm has better performance for the classification of power quality signals with single and multiple disturbances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4147-4157
• /
• 2015

The weapon system has developed by adding various functions because of the warfare change. And, an weapon system test set (WSTS) that is used to test and judge the condition of weapon system also deal with a lot of complex information. However, almost WSTS is developed on the basis of developer-centric. Because of it, it is hard to make a result by apprehending information on WSTS's display. Thus, I proposed a new display of WSTS by adapting the Ecological Interface Design(EID) Methodology to reduce operator's cognitive workload and assure safe testing. WSTS's Display is developed through Information Requirement and Work Domain Model as a result of Work Domain Analysis. The most powerful thing in the new display is that operator can identify his testing and status of WSTS directly. I expect that it reduces operator's cognitive workload and helps safe testing.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1318-1323
• /
• 2007

Proposed herein is a shape design of a different rail support block with existing ones for the commercialization of the urban maglev. The rail support for existing test lines adopts monoblock steel sleeper, whereas an individual support system has been proposed to achieve an additional cost savings and to provide an emergency exit. Also, to enhance the easiness of installation and the repairability, alignment adjusting methods suitable for the new design have been devised.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.129-149
• /
• 2010

Although many organizations have implemented and used ERP systems for years, industry reports point out that the usage level does not reach their expectation. As a result, they do not enjoy the benefits from the investment into ERP systems. This study attempts to develop a research model and test the model empirically for identifying factors that affect the usage of an ERP system at a public organization. This study has classified potential factors into three groups of technical system characteristics (usability, usefulness), organizational support characteristics (operational support, education and training, evaluation and measurement), and user characteristics (organizational citizenship, self-efficacy). Then, a structural equation model has been established on the basis of previous literature and tested with empirical data. In summary, this study has found that self-efficacy, usefulness, and operational support have an effect on the ERP usage. Self-efficacy is the strongest factor; Usefulness is the second; and the third is operational support. On the contrary to the previous literature, this study has not found a significant effect of organizational citizenship on the usage. The result confirms that an organization can increase the ERP usage by improving the usefulness of an ERP system to some extent. However, to boost the usage further, the result implies that organizations need to strengthen the self-efficacy of their members by reinforcing operational support, providing education and training steadily, and establishing an evaluation mechanism in relation with the ERP usage.