• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.282-285
• /
• 1997

The torque efficiency of oil hydraulic pump is an important factor for it's performance characteristics. A study on the performance test method of oil hydraulic pump is based on test standard, but there is to be desired an study for double or tandem type oil hydraulic piston pump. So in this study present a test method on the tandem pump for torque efficiency and analysis method of the results.

• Journal of TMJ Balancing Medicine
• /
• v.2 no.1
• /
• pp.8-12
• /
• 2012

Objectives: It has been reported to continue that temporomandibular joint balancing medicine (functional cerebrospinal therapy; FCST) is effective in treating incurable diseases in clinic recently. FCST is based on the results of restricted cervical rotation test, it means that the results of restricted cervical rotation test has a very high reliability on test results. Methods: This study has the aim to understand restricted cervical rotation test method and to use well with high technical skill. So manual muscle test method which was based on the upper limb lifting resistance test method are compared with restricted cervical rotation test method and had been discussed. Results: Results are that restricted cervical rotation test by using the passive motion of arrested persons (patients) have high the reliability and accuracy. Conclusions: It is concluded that restricted cervical rotation test is the new type of manual muscle tests and the results of test are very high the reliability and accuracy so that the acquirement of test method is helpful in clinic practically.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.6
• /
• pp.201-214
• /
• 2014

In this paper, we propose a test case generation method adequate to destructive test of the BLDC(Brush Less Direct Current) motor controller used for the MDPS(Motor Driven Power Steering) system embedded in an automobile. The proposed method is a modified CTM(Classification Tree Method). CTM generates test cases assuming that all inputs are equally important. Therefore, it is very hard to generate test cases for extreme situations. To overcome the drawback and generate test cases specialized for destructive test. a modified CTM that compensates the limitation of traditional CTM is proposed. The proposed method has an advantage that it can intensively generate the test scenarios adequate to extreme situations by combining the test cases generated by the transitional CTM the while keeping the merit of the traditional CTM. The test scenarios for destructive test for the MDPS system embedded in a commercial automobile are generated utilizing the proposed method. The effectiveness of the proposed algorithm is verified through the test.

• The Korean Journal of Food And Nutrition
• /
• v.3 no.2
• /
• pp.207-210
• /
• 1990

Paper chromatography and (NH4)2SO4 precipitation method were used for refinement and separation of proteins Color reaction was tested by Biuret test, Million test, Xanthoprotein test, and Ninhydrin test. Precipitation reaction and coagulation of proteins were tested by heating method (Ethanol, HNO3).

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.349-355
• /
• 2014

The resistance test of a high speed craft such as planing ship is performed with a high speed towing carriage instead of ordinary towing carriage because of the speed limitation. In the resistance test using high speed towing carriage, the model ship is fixed to the carriage to restrain the running attitude for enough measuring time. Such method is called fixed model test method. In the fixed model test method, to get the appropriate running attitude, the model test is iteratively repeated until the trim moment and lift force are close to zero. In this research, trim free model test method is investigated to reduce the number of iteration. And, the limitation of towing speed range in the trim free model test method is investigated.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.48-54
• /
• 2009

In this paper, a test method of HDMI connectors is developed using a test zig. This method is used to test the characteristic for a digital signal connector, and is applied the compliance test specification. The test results of connectors for the two manufactory are implemented by the new proposed method. Finally, it is suggested to the new test method of HDMI connector in this paper, and is applied to the simple test method of connector in manufactory.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• 연구논문집
• /
• s.32
• /
• pp.35-43
• /
• 2002

This study was performed to develop accelerated life test method of machanical parts using cumulative damage theory that used to model the fatigue of parts that receive variable load. The cumulative damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% reliability for one test sample. According to the cumulative damage theory, because test time can shorten in case increase test load, test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7. This accelerated test method was used to develop accelerated test method of gear reducer, hydraulic hose and bearing as well as agricultural tractor transmission and it is considered to be applied comprehensively to machanical parts the fatigue of which is happened by load or pressure etc.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.3
• /
• pp.115-119
• /
• 1990

The reaction rates, duration times and neutralizing capacities of the antacids which are frequently used in Korean market and three different commercial combination products were evaluated in vitro by Fuchs method and Johnson-duncan method, respectively. In vivo tests of combination products were determined in the fasted state of rat by Aspiration method. Comparing the result of in vitro test with that of in vivo test, the maximal pH was lowered by 2-3 value and the durational time increased by two folds in vivo test. Each antacid composition and combination products from three phamaceutical companies (A, B, and C) were studied, respectively. The duration times measured by Fuchs method were double compared to those by Johnson-Duncan method. A and C preparation maintained the pH range from 3 to 7 for 60 min by Fuchs method. In vovo test, maximum pH of A, B and C preparation was 6.50, 3.65, 2.65 and duration time of those was 200, 500, 0 min, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.926-931
• /
• 2008

This paper show two different standardized test methods(Japanese Geotechnical Society; JGS 2003). One test is a "Test Method for Frost Heave Prediction Test, JGS 0171-2003", and the other test is a "Test Method for Frost Susceptibility, JGS 0172-2003". The purpose of this test is to obtain the freezing rate(freezing speed), frost heave ratio(heave to sample height), frost heave rate(heaving speed), and other parameters to be used for frost heave prediction and determine the frost susceptibility by freezing test with water intake. This method shall be used to predict the frost heave in frozen ground and evaluate the frost susceptibility of natural and replacement materials.