• 한국추진공학회지
• /
• 제14권3호
• /
• pp.61-68
• /
• 2010

본 연구에서는 가스터빈 연소기의 고공환경 모사 점화 성능 시험을 목적으로 소형 고공환경 모사 시험 설비를 구축하였고 이에 대한 성능 실험을 수행하였다. 고공환경 조건인 저압 환경 구현을 위해서는 초음속 디퓨저를 사용하였고, 저온 환경 구현을 위해서는 드라이아이스를 냉각제로 사용한 열교환기를 사용하였다. 저압 환경 구현 성능 실험 결과 연소기로 20g/s의 공기 공급 상태에서도 연소기 내부에 고도 약 6,100m에 해당하는 저압 환경 구현이 가능한 것을 확인하였다. 또한 저온 환경 구현 성능 실험 결과 연소실 내부에 고도 6,100m 이상의 저온 환경 구현이 가능한 것을 알 수 있었으며, 상온공기와 냉각공기의 혼합율 조절로 다양한 고도의 저온 환경 구현이 가능한 것을 확인하였다.

• 한국조리학회지
• /
• 제20권5호
• /
• pp.76-83
• /
• 2014

This article examines the effects of education service quality of culinary education facility on the learning outcome. For this, items for figuring out the relation between education service quality and the learning outcomes has been deducted through IPA regarding education service quality. Further, the factors of education service, which is for verifying the effects of relevant experiences (culinary certificate) have been examined according to advanced studies. Self administered questionnaires have been prepared by 231 samples in total and the collected data have been analyzed through frequency, factor, reliability and regression analyzing methods by using SPSS 18.0. The results from paired t-test performed on the importance and performance of culinary education service quality indicate that expertise, level of knowledge, education method of instructor and additional convenience facilities (locker and lounge etc) are the most important factors respectively. The results from IPA analysis show that the quadrant 1 includes knowledge level, education method, kindness of instructor. The quadrant 2 contains awareness of instructor while the third one includes culinary facility, tool structure and convenience facility. In addition the quadrant 4 includes hygiene of learning place. According to the results from hypothesis test, education service quality affects learning outcome and the experience (certificate) of learner from culinary education facility results in difference in education service quality and awareness of learning outcome therefore the hypothesis is partially verified.

• 성인간호학회지
• /
• 제24권2호
• /
• pp.99-108
• /
• 2012

Purpose: The study was done to identify factors influencing the quality of life of elderly in non-paid or paid assisted living facilities. Methods: Data were collected by questionnaires from 634 elderly in Seoul and Gyeonggi province. Measures were self-esteem, activities of daily living, depression, family support, health status, facility adaptation, care facility's quality, and quality of life. Data were analyzed using $x^2$-test, independent t-test, ANCOVA, Pearson correlation coefficients, and stepwise multiple regression with SPSS/WIN 15.0 version. Results: The significant factors influencing quality of life of elderly in non-paid assisted living facilities were care facility's quality, depression, self-esteem, family support, education, and activity of daily living, which explained about 40.4% of the variance. The significant factors influencing quality of life of elderly in paid assisted living facilities were activity of daily living, depression, family support, education, care facility's quality, and facility adaptation, which explained about 83.9% of the variance. Conclusion: The results suggest that type of assisted living facilities in developing nursing interventions to improve quality of life of elderly should be considered.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.584-587
• /
• 2011

마하 5 스크램젯 엔진에 대하여 연소 시험에 대한 예비 시험 성격으로서 연료 분사 없이 내부 유동 공력 시험을 수행하였다. 엔진은 흡입구 크기 $70mm{\times}200mm$, 전체 길이 1.7m의 시험용 모델을 대상으로 하였다. 설비는 한국항공우주연구원이 자체 설계 개발하여 보유한 불어내기식 극초음속 시험 설비를 사용하였다. 측정은 엔진 내부 유로를 따라 19개 지점에서 압력을 측정하였다. 시험 결과 본 엔진 모델을 사용하여 설비 시동이 가능하였으며 엔진 내부는 초음속 유동이 유지됨을 확인하였다.

• 항공우주기술
• /
• 제2권1호
• /
• pp.29-34
• /
• 2003

전기체 구조시험에서 사용되는 시험설비는 규모가 크고 여러 시스템들이 상호 유기적인 결합체계를 이루고 있다. 이 시험설비를 구성하는 여러 요소들이 비정상적인 작동을 하게 되면, 구조시험의 진행이 영향을 받게 되며 몇몇 중요 요소들은 구조시험의 돌발적인 중지를 유발하게 된다. 따라서 이들 중요 요소들은 시험동안 감시의 대상이 되며, 이를 위한 감시 시스템이 필요하게 된다. 본 논문에서는 전기체 구조시험 설비 감시 시스템 개발과 관련하여 감시 및 지시 대상 항목 선정, 시스템 설계에 대하여 소개하였다. 본 논문에서 소개된 감시 시스템은 현재 T-50 전기체 정적 시험에 성공적으로 활용되고 있으며, 향후 피로시험에 적용할 수 있도록 확장할 예정이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1149-1149
• /
• 2006

The leakage characteristic is an important factor in power plant. However, most of power plant have efficiency problem which is occurred leaking between high pressure steam turbine axle and stator. The labyrinth seal which is used between the main turbine axle and stator in the power plant. Because it is able to be non-contact seal and it is minimize clearance to decrease the leakage. But its actual system is too huge to experiment. Therefore, most steam turbine seal performance tests were conducted by air similarity test. This paper described a test facility and program for air similarity test of high pressure steam turbine seal. A test facility has been designed and built to evaluate leakage verification of labyrinth seal. The test facility consist of air compressor, anti-swirl labyrinth seal for 1/3 air similarity model, pressure transducer, air flow measure system, instrumentation and auxiliary system. For evaluation of steam turbine seal performance, the air similarity test of labyrinth seal leakage verification was conducted and we compared experiment data and analysis result.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.112-115
• /
• 2017

고공엔진시험설비에서 지상 시험 조건의 시험 가능 여부와 설비 안전 문제를 점검하고자 로켓 엔진 유동을 해석하였다. 진공 챔버를 개방한 상태에서 냉각수를 초음속 디퓨저로 분사하면서 엔진이 작동하는 상황이며, 2차원 축대칭과 플룸, 공기, 냉각수의 3원 혼합물로 가정하였다. 해석 결과 냉각수 유량 200 kg/sec까지 지상 조건 시험이 가능하였다. 그러나 시동 초기 플룸의 역류로 인해 진공 챔버가 고온에 노출되고, 동시에 냉각수 역류로 인해 진공 챔버 내부가 오염되었다. 따라서 충분한 단열 대책과 오염 회피를 위한 작업이 선행되어야 한다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권4호
• /
• pp.147-155
• /
• 2007

Mobile air conditioning systems work under widely changing operating conditions. To understand the system behavior under such dynamic conditions, a test facility that can impose transient loads as well as conducting dynamic measurements is needed. To test mobile air conditioning systems including their dynamic performance under various drive cycle patterns without using full scale vehicles in a wind tunnel, a new test facility, called "dynamic simulator," is described. It can replicate real vehicle operating conditions by interacting with the system being tested based on the measured system performance and subsequently adjusting the air properties returning to the test system based on the results of a numerical cabin model. A new dynamic simulator has been designed, constructed, and verified for performing dynamic tests. It was successful in controlling the temperature and relative humidity of the air returning to the test unit within ${\pm}0.7^{\circ}C$ and ${\pm}4%$ of their respective intended values. The verification test under the New European Driving Cycle demonstrated that detailed transient behavior of the mobile air conditioning system could be measured by using this dynamic simulator.

• Corrosion Science and Technology
• /
• 제8권4호
• /
• pp.133-138
• /
• 2009

For the corrosion protection of the natural gas transmission pipelines, two methods are used, cathodic protection and coating technique. In the case of cathodic protection, defects are embrittled by occurring hydrogen at the crack tip or material surface. It is however very important to evaluate whether cracks in the embrittled area can grow or not, especially in weld metal. In this work, on the basis of elastic plastic fracture mechanics, we performed the CTOD testing with various test conditions, such as testing rate and potential. The CTOD of the base metal and the weld metal showed a strong dependence of the test conditions. The CTOD decreased with decreasing testing rate and with increasing cathodic potential. The morphology of the fracture surface showed the quasi-cleavage at low testing rate and cathodic overprotection. The low CTOD was caused by hydrogen embrittlement at crack tip.