• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.34-39
• /
• 2014

There are so many difficulties of melt bonding mainly applied for hull construction of a aluminum alloy small boat. For resolving this problem, Friction stir welding(FSW) in non-melting solid state welding Process generally is applied in the transport industry. This paper is studied the joining strength characteristics and macrostructure according to dissimilar aluminium 5000/6000 alloy joining for a small boat applied for this FSW technology. It is reported that difference of joining strength in accordance with the direction of rotation in case of friction stir welding between dissimilar metals(Al/Cu, Al/Fe) is also highly large. In this study, Test is carried out by making the specimen according to the direction of rotation of dissimilar aluminium alloy joining.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.710-716
• /
• 2005

The objective of the present study is to design a hull form of a 9.77 ton class trimaran for use as a Pleasure boat around the bay of Gyounggy. The boat will be made of fiber reinforced plastics and equipped with a 650 hp diesel engine with a conventional water jet propulsion system and the maximum speed be 25 knots after fully loaded. In the present study, the optimal configuration such as relative location of outriggers of the 9.77 ton class trimaran is selected and the resistance characteristics are carefully studied through a series of model tests. The general arrangement of the boat are also considered in the final decision of the hull form.

• 대한조선학회지
• /
• 제21권3호
• /
• pp.1-10
• /
• 1984

The computer programs of effective horsepower estimation of small fishing boat were developed, which was based on the statistical analysis of model test results. From the EHP estimation by these program and experimental model tests of practical fishing boats, the estimation accuracy was verified with maximum deviation of about 10 percent. Also, the EHP estimation accuracy was practically applied to initial design of four small fishing boats, and after the tank tests, the EHP reduction of the order of 15 to 25 percent was confirmed, as compared with existing ships. Moreover, a computer aided design procedure of fishing boat's hull form has been proposed in this study. The practical use of this procedure of fishing boat's hull form has been proposed in this study. The practical use of this procedure was demonstrated with the hull form design results of several fishing boats.

• 한국항해항만학회지
• /
• 제31권10호
• /
• pp.813-818
• /
• 2007

선박의 선형시험설비로는 회류수조, 예인수조 등이 있으나, 소형 고속선박은 실선 대응 모형선의 축적비가 대형선에 비해 매우 작고 수조의 유속과 예인전차의 속도제한으로 고속선의 설계선속까지의 성능검증에는 한계로 작용하였다. 이에, 고속 활주형선의 선형시험 검증을 위해 실 해상모형시험기법을 정립하였다. 한편, 고속 Stepped Hull선형은 일체형 활주형 선저선형에 비하여 고속 주행시 공기공급에 따른 접수면 감소로 인하여 저항감소에 따른 속도향상과 연비절감 효과가 있으나, 선미 좌우측의 접수면 감소에 따른 횡동요 안정성이 감소되는 경향이 있다. 이에, 본 논문에서는 고속 선형시험이 가능한 해상모형시험을 이용하여 선미 보조동체 장착 유무에 따른 고속 Stepped Hull 선형의 횡동요 및 저항특성을 비교, 분석한 것이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.585-598
• /
• 2021

The course-keeping stability of a high speed planing boat should be considered at the design stage for its safe operations. The shape of waterjet intake plane is one of important design parameters of a waterjet propelled planing boat. That has significant influences on the stern flow patterns and pressure distributions. In this study, the effects of the waterjet intake shapes of planing boats on the course-keeping stabilities are investigated. Two kinds of designed planing boats have the same dimensions, but there are differences in waterjet intake plane shapes. Captive and free-running model tests, Computational Fluid Dynamics (CFD) analyses are carried out in order to estimate their hydrodynamic performances including course-keeping stabilities. The results show that the flat and wide waterjet intake plane of the initially designed boat makes the course-keeping stability worse. The waterjet intake shape is redesigned to improve the course-keeping stability. The improved performances are confirmed by free-running model tests and full-scale trials.

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.552-557
• /
• 2014

본 연구의 목적은 1인승 보트를 설계 제작하여 시운전 및 전산유체역학(CFD)를 이용하여 속도성능을 분석하는 것이다. 선형설계를 포함한 보트의 전반적인 설계과정을 설명하였고, 설계를 바탕으로 제작된 보트에 대하여 잠잠한 해상에서 시운전을 수행했다. 시운전을 통해 보트의 설계속도에서 제동마력은 1680 W가 계측하였다. 유동해석은 상용 CFD 코드인 STAR-CCM+를 이용하여 자유수면과 동적트림을 고려하여 수행되었다. 유동해석 결과 잉여저항 성분이 마찰저항 성분에 비해 크게 나타나는 것을 확인할 수 있었다. 시운전과 CFD 결과를 바탕으로 보트의 전체효율계수를 추정하였다. 전체효율계수는 전달효율과 준 추진효율로 나누었다. 준 추진효율은 동일 프로펠러를 사용하는 솔라보트의 속도성능 추정 시 사용될 수 있다. 연구결과은 향후 개발될 보트의 선형설계, 성능분석 및 개발에 정보를 제공할 수 있다.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.47-54
• /
• 2014

선체 내구성은 기존 선급 규격에 의하여 구조 치수를 결정한 후 이러한 치수의 선체구조에 대하여 스펙트랄과 결정론적 및 간이 방법에 의하여 평가되고 있다. 이러한 방법은 선체재료를 선급 규격에서 제안하고 있는 재료로 구성하는 경우에는 적용할 수 있으나 선체 재료를 신소재로 구성하는 경우에는 적용할 수 없다. 따라서 본 연구에서는 폴리에틸렌 보트 선체에 대한 피로 손상을 평가하기 위하여 선체에 부하되는 단기간 선체 가속도를 직접 측정하고 이러한 데이터를 기초로 구조설계와 피로수명평가방법이 확립되지 못한 소형 선박의 선체 내구성을 선형누적손상 법칙으로 평가하는 방법을 제안하였다. 개발된 폴리에틸렌 보트의 경우 최대 가속도 상태에서 보트에 부하되는 최대 Von-Mises 응력은 1.8MPa로서 $1{\times}10^9$ 사이클 피로강도 5.9MPa 아래에 있고 유한피로수명개념을 적용한 폴리에틸렌 보트의 내구수명은 415년으로 평가되어져 거의 무한수명을 가지고 있다.

• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.205-214
• /
• 2018

This paper deals with the experimental study on the hygrothermal ageing effect to the strength of Carbon Fiber Reinforced Plastics (CFRP) materials for marine leisure boat manufactured by vacuum assisted resin infusion method. The experiments performed consist of tensile, flexural and shear tests according to American Society for Testing and Materials (ASTM) and Korean Industrial Standards (KS) test methods. Test coupons are varied from uni-directional(UD, $0^{\circ}$, $90^{\circ}$), Bi-Directional (BD), and Double-Bias (DB) carbon fiber fabrics in conjunction with epoxy resin. The results of tensile test show that tensile strength reduces significantly while not the same degree of reduction is observed for elasticity modulus with respect to the existence of hygrothermal ageing effect. This implies that the tensile strain induced from external load holds steady values but ultimate strength values change widely under hygrothermal ageing effect. In case of the flexural test, $0^{\circ}$ UD shows more strength reduction than $90^{\circ}$ UD while BD has reduced values in both flexural strength and elasticity modulus under hygrothermal ageing effect. It is learned that the bending strain induced from external load and ultimate strength values are reduced with respect to hygrothermal ageing effect. Shear test performed only on DB materials, and the results show marginal reduction in ultimate strength and moderate reduction in elasticity modulus. This means that the shear strain varies more than ultimate shear strength with respect to hygrothermal ageing effect. The experiment conducted in this paper clearly demonstrates the differences in material properties of the CFRP for the consideration of hygrothermal ageing effect. Findings obtained from this experimental study can serve as a fundamental input data for the realistic structural responses of marine leisure boat built in CFRP materials.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.112-118
• /
• 2013

This paper reports the results of a comparative study on rudder performance between the steel rudders that have been used in coastal angling fishing boats in the 20-GT class and the newly developed FRP composite material rudders. In order to compare the rudder performances of these two types, a sea trial test was carried out to investigate the speed performance, fuel consumption, and ship's turning ability. The results showed that the sea trial performance of the FRP composite rudder was better than that of the steel rudder type in terms of the sea speed, fuel consumption rate, and turning ability.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.79-84
• /
• 2004

Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test at high speed circulating water channel(CWC) and CFD technique. The effect of a fin attached at hull side and initial trim are studied together. Wave patterns are observed to make clear the relation between the resistance performance and the wave characteristics. it can be found that the initial trim plays a role to increase the resistance performance above a certain velocity.