• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.239-249
• /
• 2013

In the present scenario to fulfill the demands of sustainable construction, concrete made with multi-blended cement system of OPC and different mineral admixtures, is the judicious choice for the construction industry. Silica fume (SF) and fly ash (FA) are the most commonly used mineral admixtures in ternary blend cement systems. Synergy between the contributions of both on the mechanical properties of the concrete is an important factor. This study reports the effect of replacement of OPC by fly ash (20, 30, 40 and 50 % replacement of OPC) and/or silica fume (7 and 10 %) on the mechanical properties of concrete like compressive strength and split tensile strength, with three different w/b ratio of 0.3, 0.4 and 0.45. The results indicate that, as the total replacement level of OPC in concrete using ternary blend of OPC + FA + SF increases, the strength with respect to control mix increases up to certain replacement level and thereafter decreases. If the cement content of control mixes at each w/b ratio is kept constant, then as w/b ratio decreases, higher percentage of OPC can be replaced with FA + SF to get 28 days strength comparable to the control mix. A new method was proposed to find the efficiency factor of SF and FA individually in ternary blend cement system, based on principle of modified Bolomey's equation for predicting compressive strength of concrete using binary blend cement system. Efficiency factor for SF and FA were always higher in ternary blend cement system than their respective binary blend cement system. Split tensile strength of concrete using binary and ternary cement system were higher than OPC for a given compressive strength level.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.62-68
• /
• 2003

Thermotropic liquid crystalline polymer (TLCP)/poly(ethylene 2,6-naphthalate) (PEN)/poly(ethylene terephthalate) (PET) ternary blends were prepared by melt blending, and were melt-spun to fibers at various spinning speeds in an effort to improve fiber performance and processability. Structure and property relationship of TLCP/PEN/PET ternary blend fibers and effects of annealing on those were investigated. The mechanical properties of ternary blend fibers could be significantly improved by annealing, which were attributed to the development of more ordered crystallites and the formation of more perfect crystalline structures. TLCP/PEN/PET ternary blend fibers that annealed at 18$0^{\circ}C$ for 2 h, exhibited the highest values of tensile strength and modulus. The double melting behaviors observed in the annealed ternary blend fibers depended on annealing temperature and time, which might be caused by different lamellae thickness distribution as a result of the melting-reorganization process during the DSC scans.

• 폴리머
• /
• 제25권2호
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.101-110
• /
• 2013

PURPOSES : The purpose of this study is to evaluate the durability of ternary blended concrete mixtures adding ultra fine admixture. METHODS : From the literature review, crack was considered as the main distress failure criterion on concrete bridge deck pavement. To reduce the initial crack development due to drying shrinkage, CSA expansion agent and shrink reduction agent were used to ternary blended concrete mixtures as a admixture. Laboratory tests including chloride ion penetration test, surface scaling test, rapid freeze & thaw resistance test, non restrained drying shrinkage and restrained drying shrinkage test were conducted to verify the durability of ternary blended concrete mixtures. RESULTS : Based on the test results, proposed mixtures were verified as high qualified durable materials. Expecially initial drying shrinkage crack was not occurred in ternary blended concrete mixtures with CSA expansion agent. CONCLUSIONS : It is concluded that the durability of proposed ternary blend concrete mixture was acceptable to apply for the concrete bridge deck pavement.

• Current Photovoltaic Research
• /
• 제11권3호
• /
• pp.79-86
• /
• 2023

As we strive to mitigate the environmental impact caused by the use of fossil fuels, the exploration of alternative energy sources has gained significant attention. Solar energy, in particular, has emerged as a promising solution due to its eco-friendly nature and virtually limitless availability. Among the various types of solar cells that harness this abundant energy source, organic solar cells have garnered considerable interest. Organic solar cells feature a photo-active layer composed of organic semiconductors, offering a range of appealing advantages such as cost-effectiveness, flexibility, translucency, and the ability to produce customizable colors. However, the commercialization of organic solar cells has been impeded by certain challenges, notably their relatively low efficiency and stability. To overcome these obstacles and pave the way for wider adoption, researchers have been exploring innovative approaches, including the implementation of ternary blend organic solar cells. This strategy involves introducing a third component into the photo-active layer alongside the organic semiconductors, with the aim of enhancing the overall performance of the solar cell. In this paper, we delve into the issues associated with organic solar cells and focus on one potential solution: ternary blend organic solar cells. Specifically, we examine the application of this approach to PM6:Y6, which stands as one of the most popular combinations of organic semiconductors. By investigating the potential of ternary blends, particularly utilizing PM6:Y6, we aim to accelerate the commercialization of organic solar cells.

• 폴리머
• /
• 제38권4호
• /
• pp.449-456
• /
• 2014

Ternary blends of poly(L-lactic acid) (PLLA), poly(${\varepsilon}$-caprolactone) (PCL) and polyethylene oxide (PEO) were produced with different concentrations of components via melt blending. By leaching the PEO from the samples by water, porous materials were obtained with potential application for bio scaffolds. Sample porosity was evaluated by calculating the ratio of porous scaffold density (${\rho}^*$) to the non-porous material density (${\rho}_s$). Highest porosity (51.42%) was related to the samples containing 50 wt%. of PEO. Scanning electron microscopy (SEM) studies showed the best porosity resulted by decreasing PLLA/PCL ratio at constant concentration of PEO. Crystallization behavior of the ternary blend samples was studied using differential scanning calorimetry (DSC). Results revealed that the crystallinity of PLLA was improved by addition of PEO and PCL to the samples. The porosity plays a key role in governing the compression properties. Mechanical properties are presented by Gibson-Ashby model.

• Computers and Concrete
• /
• 제5권1호
• /
• pp.75-88
• /
• 2008

This paper presents a mathematical model for strength and porosity of mortars made with ternary blends of ordinary Portland cement (OPC), ground rice husk ash (RHA) and classified fly ash (FA). The mortar mixtures were made with Portland cement Type I containing 0-40% FA and RHA. FA and RHA with 1-3% by weight retained on a sieve No. 325 were used. Compressive strength and porosity of the blended cement mortar at the age of 7, 28 and 90 days were determined. The use of ternary blended cements of RHA and FA produced mixes with good strength and low porosity of mortar. A mathematical analysis and two-parameter polynomial model were presented for the strength and porosity estimation with FA and RHA contents as parameters. The computer graphics of strength and porosity of the ternary blend were also constructed to aid the understanding and the proportioning of the blended system.

• 공업화학
• /
• 제10권5호
• /
• pp.682-689
• /
• 1999

본 연구는 용융법에 의한 폴리아미드 6,6과 EPM 및 EPM-g-MA와 블렌딩시 탄성 중합체 함유량, 조성비(wt %), 혼합온도, 혼합속도 등의 변화에 따른 이성분 PA 6,6/EPM(or EPM-g-MA) 블렌드물과 삼성분 PA 6,6/EPM/EPM-g-MA 블렌드물을 제조하여 블렌드물 내 탄성 중합체 평균 입자 크기, 입자 형상 및 분포 등의 변화를 분석하고, 이에 따른 블렌드물의 기계적, 열적 특성에 미치는 영향을 고찰하였다. 본 연구결과, 혼합속도 250 rpm하에서 압출기 내 다섯 영역의 온도를 270, 265, 265, 255 및 $255^{\circ}C$로 변화시켜 탄성 중합체의 함유량 변화에 의하여 제조된 이성분 블렌드물중 높은 충격강도는 PA 6,6/EPM-g-MA(70/30) 블렌드물에서 확인되었으며 폴리아미드 6,6의 충격강도에 비하여 25배 증가하였다. 동일한 압출기 내 조건하에서 제조된 삼성분 블렌드물 중 PA 6,6/EPM/EPM-g-MA(70/15/15) 블렌드물 내 탄성 중합체 평균 입자크기는 $0.56{\mu}m$이면서 고른 입자분포를 나타내었으며 충격강도는 제조된 모든 블렌드물 중 가장 높았다. 이러한 블렌드물의 조성비하에서 혼합온도와 혼합속도 변화에 의하여 제조된 블렌드물의 기계적 특성과 블렌드물 내 탄성 중합체 분산정도는 감소하였다.

• 폴리머
• /
• 제32권1호
• /
• pp.63-69
• /
• 2008

두 가지 서로 다른 첨가제(additive)를 사용한 셀룰로오스 블렌드들의 기계적 성질과 모폴로지를 비교하였다. 용액 블렌딩법을 통해 만든 셀룰로오스 블렌드에는 폴리(비닐 알코올) (poly(vinyl alcohol)), PVA)과 에틸렌 글리콜(ethylene glycol, EG) 등의 첨가제가 사용되었다. 고분자 매트릭스에 사용된 첨가제의 양에 따라 블렌드 필름의 물성들은 다양하게 변하였다. PVA와 EG가 각각 30 wt%와 10 wt% 포함되었을 때 셀룰로오스 블렌드 필름의 최종인장 강도와 초기 탄성률은 가장 높은 값을 보였다. 용액 블렌딩법을 이용하여 EG를 셀룰로오스 블렌드(셀룰로오스/PVA (70/30=w/w))에 섞은 삼성분계(ternary system) 필름을 얻었으며, 이 필름에서는 EG가 40 wt% 포함되었을 때 기계적 물성이 가장 높은 값을 가졌다. 또한, 이 값은 셀룰로오스를 이용한 이성분계 블렌드 필름들보다 더 높은 기계적 성질을 나타내었다. 삼성분계 블렌드 필름에서 산소 투과도($O_2TR$)는 EG 함량이 증가할수록 가스 투과도 역시 일정하게 감소하였다. 전체적으로는 블렌드된 셀룰로오스 필름의 기계적 성질이 순수한 셀룰로오스보다 더 우수하였다.

• 폴리머
• /
• 제24권1호
• /
• pp.113-123
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2공중합 폴리에스테르계 액정고분자와 poly(ethylene 2,6-naphthalate) (PEN) 및 poly(ethylene terephthalate)를 용융혼합하여 삼상계 블렌드물의 액정상 형성여부 및 기계적 성질을 조사하였다. PHB의 함량이 40 mo1%에서 급격한 점도의 감소로 토크의 값이 감소하였고, 인장강도와 초기 탄성율은 PHB의 함량이 증가함에 따라 액정고분자의 피브릴 형성으로 증가하였다. 섬유의 인장강도와 탄성율은 PHB의 함량과 권취속도를 증가시킴에 따라 증가하였고, 에스테르 교환반응은 용융혼합 시간에 따라 증가하였다. 에스테르 교환반응은 용융흔합물의 흔화성을 향상시키고, 동일 조성비의 단량체를 함유한 공중합체에서 나타나는 액정상을 형성하였다. PHB의 함량이 30 wt%에서는 부분적인 액정상이 나타나며, 40 wt%에서 삼상계 블렌드의 의사액정상이 나타났다.