• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.81-90
• /
• 1993

The Surfactants composed of acylated aterocollagen which is produced by the acylation of the side chain amino radicals of aterocollagen with an aliphatic acid having 12 to 18 carbon atoms will be discussed in this study. This condensation is done at moderate reaction temperature (<$25^{\circ}C$) in aqueous alkaline solution. The products of this reaction were identified by UV/VIS spectroscopy and infrared spectroscopy. For these compounds, surface active properties and physical properties including isoelectric point, Krafft point, surface tension, critical micelle concentration(cmc), foaming power, viscosity behaviour, water holding capacity, skin irritation and emulsifying power were measured respectively. The experimental results received that the products have a good emulsifying power, excellent water holding capacity while having low skin irritation. Thus, these derivatives will be expected to be used as an emulsifying agent for O/W type cosmetic emulsion.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1239-1259
• /
• 2016

The modified couple stress-based third-order shear deformation theory is presented for sigmoid functionally graded materials (S-FGM) plates. The advantage of the modified couple stress theory is the involvement of only one material length scale parameter which causes to create symmetric couple stress tensor and to use it more easily. Analytical solution for dynamic instability analysis of S-FGM plates on elastic medium is investigated. The present models contain two-constituent material variation through the plate thickness. The equations of motion are derived from Hamilton's energy principle. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. It is assumed that the elastic medium is modeled as Pasternak elastic medium. The effects of static and dynamic load, power law index, material length scale parameter, side-to-thickness ratio, and elastic medium parameter have been discussed. The width of the instability region for an S-FGM plate decreases with the decrease of material length scale parameter. The study is relevant to the dynamic simulation of micro structures embedded in elastic medium subjected to intense compression and tension.

• Journal of Chest Surgery
• /
• v.27 no.5
• /
• pp.413-417
• /
• 1994

Adenoid cystic carcinoma usually grows in the trachea or near its bifurcation and causes obstruction of the air way. We recently experienced a 33 year-old male patient who had adenoid cystic carcinoma in the left main bronchus with the chief complaint of productive cough. On the bronchoscopy, the mass obstructed the left main bronchus completely and had nodularity and increased vascularity.The trachea was shifted to the left side and the lower lobe of the left lung was atelectatic on chest X-ray and computed axial tomogram.He underwent left tracheal sleeve pneumonectomy and lymph node dissection through bilateral thoracotomy. At first,we attempted left tracheal sleeve pneumonectomy through the left thoracotomy,however, it was very difficult to perform carinoplastic procedure after sleeve resection of 2.5cm of distal trachea and 1cm of proximal right main bronchus including whole left lung because of poor operative field and difficulty in the anastomosis of the right main bronchus to the distal end of the trachea without tension.Therefore after radical resection of the left lung we made right thoracotomy,through which we could anastomosed the distal trachea and right main bronchus with 4-0 PDS interrupted suture after mobilization of the right hilum without difficulty. The tumor was confirmed to be adenoid cystic carcinoma with metastasis to subcarinal lymph node histopathologically. Postoperative course was uneventful but he needed two bronchoscopic procedure to clear distal airway of the retained bronchial secretion. He was discharged at 14 days after operation with complete recovery.

• Structural Engineering and Mechanics
• /
• v.37 no.1
• /
• pp.39-59
• /
• 2011

Results of an experimental investigation on the behavior and ultimate shear capacity of 27 reinforced concrete Transfer (deep) beams are summarized. The main variables were percent longitudinal(tension) steel (0.28 to 0.60%), percent horizontal web steel (0.60 to 2.40%), percent vertical steel (0.50to 2.25%), percent orthogonal web steel, shear span-to-depth ratio (1.10 to 3.20) and cube concrete compressive strength (32 MPa to 48 MPa).The span of the beam has been kept constant at 1000 mm with100 mm overhang on either side of the supports. The result of this study shows that the load transfer capacity of transfer (deep) beam with distributed longitudinal reinforcement is increased significantly. Also, the vertical shear reinforcement is more effective than the horizontal reinforcement in increasing the shear capacity as well as to transform the brittle mode of failure in to the ductile mode of failure. It has been observed that the orthogonal web reinforcement is highly influencing parameter to generate the shear capacity of transfer beams as well as its failure modes. Moreover, the results from the experiments have been processed suitably and presented an analytical model for design of transfer beams in high-rise buildings for estimating the shear capacity of beams.

• Journal of International Academy of Physical Therapy Research
• /
• v.12 no.2
• /
• pp.2359-2364
• /
• 2021

Background: Patients with stroke have limited ankle range of motion (ROM) due to soft tissue abnormalities around the ankle and thus experience functional impairment. Increased muscle tension and reduced ankle ROM impair gait and hinder the activities of daily living. Joint mobilization and stretching are effective interventions that improve gait performance by enhancing the ankle ROM. Objectives: To investigate the effects of ankle joint mobilization and calf muscle stretching on gait speed and gait performance in patients with stroke. Design: This was a randomized controlled trial. Methods: Twenty patients with stroke patients were randomized into two groups. The joint mobilization group (JMG) underwent anteroposterior mobilization of the talocrural joint and the joint mobilization stretching group (JMSG) underwent calf muscle stretching in addition to joint mobilization. Gait speed and gait parameters were measured using the 10-meter walk test and the GAITRite. Results: Both the JMG and JMSG groups showed significant improvements in gait speed, affected-side step length, and cadence after the intervention (P<.05). Conclusion: Joint mobilization and stretching were effective interventions for improving gait performance by enhancing ankle function in patients with stroke.

• Archives of Plastic Surgery
• /
• v.48 no.1
• /
• pp.44-48
• /
• 2021

Previously reported nipple-areolar complex reconstruction (NAR) methods involve multiple incisions and wide skin redraping, which increase retraction forces and heighten the risk of nipple-areolar complex (NAC) flattening. We introduce a NAR method using the long V-Y advancement technique that can overcome these disadvantages. A V-shaped flap is designed with the width of the flap base 4-5 mm larger than the diameter of the normal nipple. The flap length is designed to be at least 2.5 times its width. Dissection is performed to the top of the artificial dermal matrix or muscle layer. The nipple is constructed with the same projection as the contralateral side by folding the elevated flap. The tip of the elevated flap is apposed in the middle of the donor defect to minimize the deformity during donor site closure. A 3-point skin suture is applied to the upper third of the folded flap to mold its shape. Using this long V-Y advancement technique, we successfully decreased skin tension in NAC flaps and improved the maintenance of reconstructed nipple projection. The long V-Y advancement technique provides an easy, simple NAR method, effectively maintaining longer nipple projections and reducing breast deformities, especially in Asian women with relatively large nipples.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.58-65
• /
• 2019

Wound caused by high-tension electrical burns is difficult to manage because the wound is deep and complex. The wound is progressively necrotic due to microvascular injury resulting in deep tissue exposure. So, coverage of the wound at the entry point and the exit point is cumbersome, often requiring flap coverage. We experienced a case of one patient for peroneal artery perforator free flap coverage on the palm of the right hand of the entry point of electrical burn. The left foot wound of electrical exit point was covered by full thickness skin graft. Also a small wound was on the left side of the lower back was the exit point of electrical burn. The lower back wound was healed and recurred repeatedly after burn. On postburn day 6 month, through the radiologic exam, metal shadow was identified in the left gluteus muscle forming chronic sinus. We explored the wound of sinus and a foreign body was identified in the sac as multi braid wires thin as hair. According to the patient's past history, we suspected that the back wound was caused by electrical burn injury through the wires.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.47-48
• /
• 2023

Reinforced concrete structures are an integrated structure in which reinforcing bars are placed on the tensile side of the beam to compensate for concrete that is strong in compression but weak in tension, so that the concrete receives compressive force and the reinforcing bars receive tensile force. It is durable, fire-resistant, economical, and adapts to the shape and dimensions of the structure. It has been widely used for a long time because it can be made freely without restrictions. However, reinforced concrete structures have the disadvantage that cracks occur easily, so they are repaired using a cross-sectional construction method. During this process, problems such as the repair part falling off occurred, so in order to solve the problem, stress changes due to changes in the size of the repair part were examined. As a result, based on the elastic modulus ratio of 1.0, the stress tended to increase as the size of the repair part decreased when it was less than 1.0, and the opposite tendency was seen when it was more than 1.0. This is believed to be due to an increase in the area of the part with a large elastic modulus.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.335-347
• /
• 1997

Vitamin D is known to exert its action by activating DNA and RBA within target cells to produce proteins and enzymes that can be used in bone resorption process. Particularly, the active form of vitmain D, 1,25-dihydroxycholecalciferol $[1,25-(OH)_2D_3]$, is considered to be one of the most potent stimulators of osteoclatic acitivity in vitro. The purpose of this study was to evaluate the effect of 1,25-Dihydroxyvitamin $D_3$ on the avtivity of periodotal ligament cells and, the experimental tooth movement. Human periodontal ligament cells were collected from the first premolar tooth extracted for the orthodontic treatment, and were incubated in the environment of $37^{\circ}C$, 5% $CO_2$ and 95% humidity. Microtitration(MIT) assay was done at 10, 25, 50 and 100ng/ml of 1,25-Dihydroxyvitamin $D_3$. 21 Sprague-Daft rats were divided into a control gmup(3), and experimental groups(18) where 100g of force from helical spring was applied across the maxillary incisors 1,25-Dihydroxyvitamin $D_3$ was injected into periodontal ligament at the mesial or distal surface of maxillary incisors so that we can compare the control side and the experimental side. Expreimental groups were sac rifled at 12, 24, 36, 48, 72hours and 7 days after force application, respectively. And the obtained tissues were evaluated histologically. The observed results were as follows. 1. The activity of periodontal ligament cells in l0ng/ml or 25ng/ml of 1,25-Dihydroxyvitamin $D_3$ 1,25-Dihydroxyvitamin $D_3$ was not significantly different to the control at the cultivation of 1, 2 and 3 days. 2. The activity of periodontal ligament cells was significantly increased at 3 days in 50 ng/ml of 1,25-Dihydroxyvitamin $D_3$ and 2, 3 days in 100g/ml of 1,25-Dihydroxyvitamin $D_3$. 3. Up to 7 days after force application, there was no difference in osteoblastic activity, tearing of periodontal ligament and proliferation of capillary at tension side between 1,25-Dihydroxyvitamin $D_3$ injection side and the control side. 4. The osteoclastic activity and the resorption of alveolar bone was greater in 1,25-Dihydroxyvitamin $D_3$ injection side than the control side at 36 hours after force application.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.351-363
• /
• 2007

The aim of this study was to evaluate pulp and periodontal changes following rapid tooth retraction by periodontal distraction after bone undermining surgery in young adult dogs. Methods: Alter extraction of second premolars, the interseptal bone mesial to the upper 3rd premolar was undermined. After activating the distraction appliance at 0.5 mm/day for six days, the dogs were sacrificed at 0, 1, 3, 5, 7, and 9 weeks during the consolidation period. Tissue changes of periodontium and pulp were evaluated radiologically, histologically, and immunohistochemically. Results: Digital subtraction radiography showed active bone formation in the stretched periodontal ligament from 0 - 4 weeks. Resorption of the alveolar bone, appearance of osteoclasts, and infiltration of inflammatory cells were observed just after the activation period at the pressure side, and distinctive bone formation was seen in the tension side of the periodontal ligament from 1 week. New bone formation was active at 1 - 3 weeks. The expression of calcitonin gene-related peptide in the experimental group was increased at the alveolar bone and pulp, and periodontal ligament at the pressure side from 0 - 1 week, and it decreased after 5 weeks to become similar to that of the control group. Conclusions: The results showed that rapid tooth movement using periodontal distraction can be new form of orthodontic tooth movement for accelerating normal bone formation.