• Journal of Korean Medicine Rehabilitation
• /
• v.29 no.2
• /
• pp.189-194
• /
• 2019

Objectives The purpose of this study was to examine comparison of tension according to the type of sling cord during the bridging exercise with sling in stroke patients. Methods Twenty six stroke patients were recruited for this study. Subjects were randomly performed sling bridging exercise with three types of sling cords such as nonelastic cord with affected side-nonelastic cord with non affected side (NC-NC), nonelastic cord with affected side-elastic cord with non affected side (NC-EC), and elastic cord with affected side-nonelastic cord with non affected side (EC-NC). They were measured tension with a tensiometer of sling cord during the bridging exercise with sling. Results The tension of sling cord was significantly different in affected side, non affected side, and tension ratio of affected side/non affected side. There were significant differences tension in NC-EC from NC-NC and EC-NC and the NC-EC method was increased tension of affected side and decreased tension of non affected side. Conclusions These results showed that the NC-EC method was improved the symmetry of affected side and non affected side. Sling exercise with appropriate type of sling cord should be increased activities of affected side and improved recovery in stroke patients.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.1-12
• /
• 1989

To study the structure of opposite wood in the angiosperms. samples were cut from stems and branchs of 10 spcies growing in Korea. The opposite side was defined as being along a line passing from the most wide annual ring of the tension wood on the upper side to the pith and extrapolated through the opposite side. lateral sides being on the right and left of this line. The stem woods growing almost horizontally were surveyed the structural features of the well-developed opposite wood for the tension wood. In the annual-ring of the well-developed opposite woods. an investigation was made on how the dimension of elements, microfibril angles. and cell wall layers change from tension side to opposite side. The structural characteristics of opposite wood in hardwoods realized in this study are as follows: 1. The vessel diameters increased continuously to ward the opposite side in which the values were maximum. The vessel length also increased toward opposite side. but the rates of increase were smaller than those in the vessel diameters. 2. The wood fiber length were decreased from tension toward opposite side. but the rates of decrement were f1actuated within the sampled species. 3. The microfibril angles had the minimum values on the tension side. then increased steeply toward the opposite side in which the values maximum. 4. In the percentage of elements the vessel elements increased continously at a relative rate from the tension to opposite side, whereas the values of the wood fibers were lower in the opposite than the tension side, but the' variation patterns of rays were not seem distinctly. 5. The component layers of the wood fiber in the opposite woods were very similar to the lateral woods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.701-706
• /
• 2005

Pipes, tubes. and tubular sections with external transverse high fins have been used extensively for heating cooling, and degumidifying air and other gases. This work was performed to investigate an air side heat transfer charactieristics of minichannel with tension wound transverse fin. This estimate was confirmed conversion heat capacity the air side surface area enlargement and heat transfer charactieristics performed available inlet tube side hot water mass flux or outlet tube side air frontal air velocity. The most suitable tension wound transverse finned minichannel was measured extremely low in air side pressure drop and fin effectiveness $3.3\~4.4$. The pressure drop $0.9\~2.8Pa$ was ranged frontal air velocity $0.5\~1.2m/s$. It is also appeared that heat transfer in air side could be better conversion heat area which has been increased $330\%$ of heat capacity compared with the bare tube.

• Journal of Families and Better Life
• /
• v.16 no.4
• /
• pp.83-83
• /
• 1998

The purpose of this study is to investigate interpersonal support, tension in lifechanges & satisfaction. The selected sample is composed of 387 housewives in ChongJoo city. SAS pc program was used for the statistical analysis of the data. Data was analyzed by frequency, F-test, percentage, mean, Duncan's Multiple Range Test, Pearson's correlation coefficient, Regression Analysis. Major findings as follows: 1)At wedding & funeral ceremony, kin networks of her parents & parents-in law side were variables to have influence on tension in life changes. And the number of social organization participated were a variable to have influence on the satisfaction. The age of couple, education of couple, duration of marriage, income, family lifecycle, the number of children, pattern of family were variables to influence tension in life changes, but were not variables to influence on the satisfaction. 2) At usual or wedding & funeral ceremony, kin networks of her parents side were variables to influence on instrumental & companionship support. And the number of friends was a variable to influence on companionship & informational support. The number of neighbors was a variable to influence on instrumental, companionship & informational support. The number of social organization participated was a variable to influence on companionship & emotional support. The age of couple, education of couple,income, duration of marriage, family life cycle, number of children, family size, family type were variables to influence on interpersonal support. 3)The relationship between tension and satisfaction in life changes was negative, and between instrumental support and satisfaction was negative also. But between companionship support and satisfaction was positive relationship and between tension of personal &social life and instrumental support was positive relationship. The relationship between tension of marriage life and companionship support was negative and between tension of family life and information support was negative relationships. The received companionship support was lower tension in life changes than not received it. But the received instrumental support was higher tension of personal & social life. The received companionship & informational support was higher satisfaction than not received them. But the received instrumental support was lower satisfaction than not received it. 4) Instrumental & companionship support, at usual kin network of her parents in taw side, at wedding & funeral ceremony kin network of her parents side,were variables to influence on tension in life changes. Instrumental, companionship& informational support, at wedding & funeral ceremony kin network of her parents side, were variables to influence on the satisfaction

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.8
• /
• pp.680-688
• /
• 2001

In this paper, the fuzzy control with variable input gain is applied to maintain the consistent tension in the process of taking up and releasing texture. In the process of discharging web on one side rolling it on another, the take-up drum gets smaller on the release drum side as it gets bigger on the rolling side, thus it is necessary to change the balance of velocity between the sides. In order to solve the problem a tension controller is necessary. The PI control method has been employed to maintain the consistent tension, but the PI control method produces a problem which requires an experienced worker with the traits of the machine, in order to perform the fine adjustments according to the environment of the process. For solving the above problem, we apply fuzzy control to the tension system, in order to produce a uniform roll. For the performance test, the fuzzy controller does not need to revise the parameters. Therefore the fuzzy controller exhibits an excellent additivity for the tension system where the system is changed with time.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.211-217
• /
• 1992

In order to elucidate the formation of reaction tissues during the transition from primary to secondary growth, the developmental anatomy was conducted in the first internode of Acer sacchan'num seedling in horizontal position. During the transition from primary to secondary growth, tension wood(gelatinous fiber) was gradually developed on the upper side only, And the tension wood formation in the upper side of the horizontal first internode proceeds acropetally from base to apical portion. Some of the anatomical features of tension wood start to be in the primary vascular tissue and a typical tension wood show during the secondary growth, Therefore, the procambium seems to respond to the gravity as well as vascular cambium. For this reason, both procambium and vascular cambium has to regard as the same meristem, On the other hand, the upper side vessels were longer than those of the lower side in the horizontal first internode. The lateral-wall pitting of vessel elements, however, showed no differences between upper and lower sides which have alternate type. The width and height of rayon the upper side of horizontal first internode was larger as compared with the lower side.r side.

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.297-308
• /
• 1992

The effect of orthodontic force on the collagenase and phosphatase activities of the adjacent alveolar bone was evaluated. Maxillary canines of male cats were treated orthodontically with closed coil spring so as to exert about 80g force. Sixteen cats were equally divided into one control group and seven experimental groups (12 hrs, 24 hrs, 36 hrs, 2 days, 3 days, 5 days and 7 days after orthodontic treatment). After sacrificing all animals on experimental intervals, collagenase, acid phosphatase (ACP) and alkaline phosphatase (ALP) activities were determined in the pressure and tension sides of alveolar bones. ACP activities increased in both the pressure and tension sides, but significantly increased in the pressure side continuously. ALP activities increased in the tension side at early stage (1-2 days after treatment), but changed small amount in the pressure side. Collagenase activities increased in the pressure side, especially at late stage (5-7 days after treatment). These results suggest that (1) orthodontic fore force increases the ACP, ALP and collagenase activities generally and (2) activities of ACP and collagenase increase in the pressure side, but that of ALP in the tension side and (3) activities of ACP and ALP increase at early stage, but that of collagenase at late stage after orthodontic treatment. Therefore it is shown that there are time differences in the formation and destruction of organic and inorganic components in the bone metabolism of alveolus with application of the orthodontic forces.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.6-12
• /
• 1998

Test results of domestic softwood lumber were presented to examine the notch effect of beams and compare to present AIJ(Architecture Institute of Japan) formula in notched wood member especially positioned in bottom side (tension side) of a beam. Notched lumber was tested under following condition : each specimen supported simply, and subjected to third-point loading at points of 1/3 of the span length. Notch was located opposite side to loading direction and notch depth were 1/6, 1/4, 1/3 of beam depth. Deflection and load were measured by digital dial guage each in 25kgf increment. Bending test results were as follows; Mpro/Mmax range (proportional and maxium bending moment ratio in notched beam) was 0.5 - 0.65. It was considered that maxium bending moment was about 1.5 times to proportional bending moment in notched beam and showed same tendency in the test result of ordinary wood specimens. AU standard formula for the tension side notch, Mmat = 0.6 ${\times}$ (Zo $\sigma$), the constant 0.6 was suitble for notch ratio(notch depth to beam depth) 1/6, but this ratio for 1/4, and 1/3 was not. So it is preferable to accept smaller value than 0.6 for notch ratio more than 1/3. These experiment results showed critical effect in tension side notched wood beam especially in greater than notch ratio 1.3 of wood beam. From the above results, it is recommened to revise design formula adoptable to domestic wood constructon member with tension side notched member.