• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.167-176
• /
• 2016

Shear friction strength model of concrete was proposed to explain the direct friction mechanism at the concrete interfaces intersecting two structural elements. The model was derived from a mechanism analysis based on the upper-bound theorem of concrete plasticity considering the effect of transverse reinforcement and applied axial loads on the shear strength at concrete interfaces. Concrete was modelled as a rigid-perfectly plastic material obeying modified Coulomb failure criteria. To allow the influence of concrete type and maximum aggregate size on the effectiveness strength of concrete, the stress-strain models proposed by Yang et al. and Hordijk were employed in compression and tension, respectively. From the conversion of these stress-strain models into rigidly perfect materials, the effectiveness factor for compression, ratio of effective tensile strength to compressive strength and angle of concrete friction were then mathematically generalized. The proposed shear friction strength model was compared with 91 push-off specimens compiled from the available literature. Unlike the existing equations or code equations, the proposed model possessed an application of diversity against various parameters. As a result, the mean and standard deviation of the ratios between experiments and predictions using the present model are 0.95 and 0.15, respectively, indicating a better accuracy and less variation than the other equations, regardless of concrete type, the amount of transverse reinforcement, and the magnitude of applied axial stresses.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.39-52
• /
• 1995

Burning mouth syndrome is characterized by a burning sensation in oral cavity without clinical signs. There has b een no established theories about the diagnosis and treatment. The purpose of this article is to examine the clinical feature of BMS patients of Korean and to present a treatment protocol that can be helpful in clinical applications. The subjects chosen for the study were 52 patients who had visited Department of Oral Diagnosis at Yonsei University Dental Hospital and were diagnosed as BMS. We did questionnaires and precise oral exam, laboratory exam, grouping of our patients, individual treatment for the groups and classification of responses to the treatment. The following results were obtained: 1. Chief complaints were throbbing (71.2%), pricking, stinging, tingling (30.8%), burning(25a%). The tongue is the most frequently affected site (82.7%), followed by full mouth, gingiva, palate, buccal mucosa, lips, throat, labial mucosa and floor of mouth. 2. The average age of onset was 48.1 year and the male to female ratio was 1 to 3. The average duration of symptom was 11.69 months for male and 23.07 months for female. 3. 32.7% of patients had appealed continuous pain, which was the most cases. Aggravating factors were peppery food, salty food, hot food, fatigue, tension conversation, sour food, cold food and toothpaste. Reducing factors were cold food, diet, going to sleep and smoking. 4. Associated symptoms were dry mouth, other life problem, altered taste perception, bad taste, throat pain, tingle and difficulty in swallowing. 5. Most of patients had appealed that there was not associated event on onset of symptom, and the order of prevalence is as fallow; dental treatment, stress, denture wearing, an attack of a systemic disease. 92.3% of patient appealed that there was no psychological withering and 7.7% of patients appealed positively. 6. There were eight males and four females that had jobs. 7. There was no family history in 100% of patients in questions about presence of family history. 8. 96.2% of patients appealed that there was no oral habits. 13.5% of patients had dryness of oral mucosa in oral exam. A significant relation to dental prosthesis was not observable, but incidence of diseases due to stress appeared high in BMS which had the clinical characteristics as above. A group having low serum iron was 63.5% and in this group period of potential iron deficiency appeared high in incidence just before move to anemia. A group represented positive response was 38.5% in fungus study for Candida albicans. Since we can expect high treatment response by prescription of iron-contained drug and antifungal drug in these patients, diagnosing patients' condition of BMS can be achieved in more various aspects through study for serum iron and Candida albicans. Furthermore, it is expected that treatment protocol can be made.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.819-825
• /
• 2006

The objective of the present study is to verify the validity of a new truss model for evaluating the contribution by arch action to shear resistance in shear-critical reinforced concrete beams. The new truss model is based on the relationship between shear and bending moment in a beam subjected to combined shear and bending. The compatibility condition of the shear deformation that deviates from Bernoulli bending plane is formulated utilizing the smeared truss idealization with an inclined compression chord. The Modified Compression Filed Theory is employed to calculate the shear deformation of the web, and the relative axial displacements of the compression and the tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. Then the validity of the model is examined by applying the model to some selected test beams in literatures. On the basis of the analytical results, the contribution by the web to shear resistance can be constant and have an excellent linear correlation with the web reinforcement ratio. The present decoupling approach may provide a simple way for the assessment of the role of each parameter or mechanism that affects the ultimate shear behavior of reinforced concrete beams.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.289-298
• /
• 2016

An experimental research was performed using fibers for the purpose of retrofitting existing reinforced concrete circular columns. Glass fiber (GF) and polyethylene terephthalate (PET) were used as well as combined GF+PET (HF). PET has high tensile strength (over 600 MPa) and high ductility (about 15%), but has very low elastic modulus (about 1/6 of GF). A total of four columns was tested against laterally applied reverse cyclic load: control column, GF-, PET-, and HF-strengthened columns. All columns retrofitted using fibers demonstrated improved moment capacity and ductility. Moment capacity of GF-, PET-, and HF-strengthened columns was 120%, 107%, and 120% of the control column, respectively. Drift ratio of all retrofitted columns also increased by 63 ~ 83% over the control column. The final failure mode of the control column was main bar buckling. The final failure mode of the GF- and HF-strengthened columns was GF rupture while that of the PET-strengthened column was main bar rupture in tension. No damage was observed for PET at the ultimate stage due to excellent strain capacity intrinsic to PET. Current test results indicate that PET can be effectively used for seismic retrofit of RC columns. It is noted that the durability characteristics of PET needs to be investigated in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.913-920
• /
• 2011

We describe the evaluation of the fatigue life and strength of a lightweight railway bogie frame made of glass fiber/epoxy 4-harness satin-woven composites. To obtain the S-N curve for the evaluation of the fatigue characteristics of the composite bogie frame, we performed a tension-compression fatigue test for composite specimens with different stacking sequences of the warp direction, fill direction, and $0^{\circ}/90^^{\circ}$ direction. We used a stress ratio (R) of -1, a frequency of 5 Hz, and an endurance limit of $10^7$. The fatigue strength of the composite bogie frame was evaluated by a Goodman diagram according to JIS E 4207. The results show that the fatigue life and strength of the lightweight composite bogie satisfy the requirements of JIS E 4207. Given its weight, its performance was better than that of a conventional metal bogie frame based on an SM490A steel material.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.649-661
• /
• 2020

This study examined the laxative effects of hot-water extracts of Hovenia dulcis Thunb. (HD), Phyllostachys pubescens Mazel (PM), and a 2:8 mixture of both (HP) in two chronic constipation models. For the loperamide-induced constipation model, animals were divided into an untreated group, negative control group (loperamide 4 mg/kg), positive control group (bisacodyl 4 mg/kg) group, and six treatment groups (HP 100 or 400, HD 50 or 100, and PM 100 or 400 mg/kg). For the low-fiber diet-induced constipation model, animals were divided into an untreated group (normal diet), negative control group (low-fiber diet), positive control group (Agio granule, 620 mg/kg), and the same treatment groups. Fecal number, weight, fecal water content, and intestinal transit ratio were higher in the groups treated with HP, HD, and PM than in the groups treated with loperamide or low-fiber diet. Thickness of colon mucosa and muscle layers were increased in the treated groups. Colon tension increased in the HP groups, and [Ca²⁺]i measurements using fura-2 as an indicator showed that HP inhibits ATP-mediated Ca²⁺ influx in IEC-18 cells. These results showed that the HP mixture has laxative activity by increased mucin secretion and inducing contractile activity and relaxation. It may be a useful therapeutic strategy for ameliorating in chronic constipation.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.47-56
• /
• 2004

To determine the pure bond strength between substrate and its overlayed concrete material, a direct pull-off test method was introduced by using a bi-material cylinder with which a penny-shaped crack was mountained at its interface. First, to evaluate the stress magnification or concentration at the interface, the energy release rates of a penny-shaped interface crack in remote tension loading on a bi-material cylinder were determined in terms of different modulus ratios and undonded area ratios(crack ratios) using a commercial finite element program. Then the energy release rates were calibrated as non-dimensional values in consideration of structural dimensions and applied forces. And to evaluate whether this new pull-off test method gives sound test results, three different sizes of unbended area ratios were incorporated along their interface in bi-material cylinders(sulphur polymer concrete + old concrete). Test results showed that all specimens were broken off at their interfaces as intended. Also the FEM analyses and test results indicated that a bi-material specimen with unbended area ratio of 0.4$\sim$0.6 is suitable for best accurate testing.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.358-364
• /
• 2001

To obtain information for the proper fertilization management of cut-flower roses, the amount of macro and micro elements absorbed by cut-flower roses from soil for a year was investigated. Three cut-flower rose cultivars which are called 'Grandgara', 'Nobless', and 'Centina' were transplanted to a sandy loam soil, N-P-K standard fertilization was applied to the soil, and drip irrigation was done at the level of 10 kPa soil moisture tension. There was not significantly different in the harvest amount of cut-flower rose between 'Grandgara' and 'Nobless', but the harvest yield of 'Centina' was about 63% level when compared to that of 'Grandgara'. Considering seasonal changes in the content of nutrients in plant, parts, the uptake of untrients was higher in winter season than that in spring and summer seasons. Except for 'Centina', the nutrient amount removed from plant parts of 'Grandgara' and 'Nobless' increased with the sequence of floral part < stem < leaf, indicating that it is more dependent on biomass yield than on the content of nutrients in each plant part. The ratio of N/K amount absorbed by 'Nobless' and 'Centina' was 1.13 and 1.28. respectively, lower than 1.68 of 'Grandgara', showing that the requirement for K is greater in 'Nobless' and 'Centina' than in 'Grandgara'. The use efficiency of nutrients by cut-flower roses ranged from 39 to 64% in nitrogen, 5 to 9% in phosphorus, and 37 to 67% in potassium. It suggests that the requirement for P in cut-flower roses is very low.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.65-74
• /
• 2010

We propose a system that automatically recognizes the tense or relaxed condition of scrolling-shooting game subject that plays. Existing study compares the changed values of source of stimulation to the player by suggesting the source, and thus involves limitation in automatic classification. This study applies SOM of unsupervised learning for automatic classification and recognition of player's condition change. Application of SOM for automatic recognition of tense and relaxed condition is composed of two steps. First, ECG measurement and analysis, is to extract characteristic vector through HRV analysis by measuring ECG after having the player play the game. Secondly, SOM learning and recognition, is to classify and recognize the tense and relaxed conditions of player through SOM learning of the input vectors of heart beat signals that the characteristic extracted. Experiment results are divided into three groups. The first is HRV frequency change and the second the SOM learning results of heart beat signal. The third is the analysis of match rate to identify SOM learning performance. As a result of matching the LF/HF ratio of HRV frequency analysis to the distance of winner neuron of SOM based on 1.5, a match rate of 72% performance in average was shown.

• Clean Technology
• /
• v.10 no.2
• /
• pp.61-72
• /
• 2004

In this study, aqueous/semi-aqueous cleaning agents which consist of organic solvent, surfactant, cosurfactant, and water were developed by changing formulation parameters such as organic solvent type and contents, surfactant type and contents, and cosurfactant/surfactant(A/S) ratio, etc.. And physical properties and flux removal of the formulated cleaning agents have been evaluated. Also, the performance of oil-water separation from the rinse water contaminated during the cleaning process was evaluated for its recycling. The formulated cleaning agents in this work expected to have good penetration because of their low viscosity and low surface tension values of 30.2~32.5 dyne/cm. The flux removal with the terpene type cleaning agent was higher than that with hydrocarbon type cleaning agent and two commercial products (CPA(commercial product A), CPB(commercial product B)). And the performance of oil-water separation by gravity settling from the rinse water contaminated with formulated cleaning agent and soils was shown to be very good. The cleaning agents developed in this work were applied to surface mounting technology(SMT) cleaning process for manufacturing electronic parts at L electronic company. As a result, the newly developed cleaning agents showed two times better cleaning speed for removal of solder cream than the conventional ond containing ethanol and IPA(isopropyl alcohol). In addition, malodor and VOC problems generated by the previous organic cleaning agents have been solved in the manufacturing field through introduction of the non-volatile and environmental-friendly cleaning agents to the field.