• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.215-218
• /
• 1999

With increasing demand of energy saving, -many efforts were made to employ aluminium alloys in the automobile industry. Especially, resistance spot welding has been widely used in the steel metal joining process because of its high productively and convenience. In this paper, spot weldability of 7075-T6 aluminium thin sheets for various welding conditions were examined by series of experiments. The tensile shear strength and microstructure of welded specimens was observed, and The optimal welding conditions were found for each welding conditions.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.26-28
• /
• 2007

This research is concerned with a study of failure strength evaluation on heat element gap at resistance welding. The failure strength of resistance welded joint is changed by welding factor like as current(power level), welding time(total energy), pressure etc. and another heat element factor like as number of element line, element gap etc. Tensile-shear tests were carried out with the single-lap specimen using polypropylene(PP). The failure mechanism and optimization of gap was discussed in order to explain the tensile-shear strength evaluation on heat element gap at resistance welding. Orthogonal array was used by fractional factorial design for efficient experiments.

• Journal of Welding and Joining
• /
• 제29권6호
• /
• pp.82-87
• /
• 2011

In this study, we conducted laser welding by using remote scanner that is 5J32 aluminum alloy to observe the mechanical properties and optimize welding process parameters. As the control factors, laser incident angle, laser power and welding speed were set and as the result of weldablility, tensile shear tests were performed. ANOVA (Analysis of Variation) was also carried out to identify the influence of process variables on tensile shear strength. Strength estimation models were suggested using regression alnalysis and 2nd order polynomial model had the best estimation performance. In addition optimal welding condition was determined in terms with wedalility and productivity using objective function and fitness function. Final optimized welding condition was laser power was 4 kW, and welding speed was 4.6 m/min.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.62-67
• /
• 2012

In this study, the bonding strengths of adhesively bonded joints are experimentally investigated. A series of lap-shear tests are conducted using single lap type adhesive joints. In order to analyse the joint fabrication factors that affected the bonding strength, the parametric tests are conducted with various thickness of adhesive, surface roughness and fillet of adhesive. In addition, for the comparative study with the welded joint, lap-shear tests using specimens with 2 welded sides and 4 welded sides are also carried out. The quantitative results of the strength analysis are summarized, and some proposals are made on setting up testing standards for adhesively bonded joints.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.559.2-559
• /
• 2001

Fanning et al.(1995) suggested that the incorporation of filler particles into a system's adhesive could increase the shear bond strength by improving the mechanical properties. In this study, shear bond strengths of experimental filled adhesives with varying filler levels were tested to determine the optimal filler level. The diametrile tensile strength and thickness of each experimental adhesive were also examined to evaluate if there is a relation between shear bond strength and mechanical properties of adhesive.(omitted)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.59-64
• /
• 1991

The purpose of this paper is to suggest the equations that are able to predict the ultimate shear strength of the reinforced high-strength concrete beams. For this analysis, total of 83 rectangular beams were tested, and existing data of 400 was adopted. Through this analysis, the following equations are obtained. a) Shear Tensile Failure Equation : TVu={K1.K2(3.02 $\sqrt[3]{\Fc}$/$sqrt{\a/d\}$+1.74Pt)+(0.18a/d+0.567)Pww$\sigma$y]bd b) Shear Compressive Failure Equation : cVu={(29.85 $\sqrt[3]{\Fc}$-130)$\sqrt{d/a}$+(0.089$\sqrt{a/d}$=0.04)Pww$\sigma$y}bd

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.283-286
• /
• 2005

When subjected to severe shear deformation by ECAP, microstructure of Al2024 becomes nanocrystalline grained texture material. To measure the strength of that, small punch (SP) testing method was adopted as a substitute for the conventional uniaxial tensile testing because the size of material processed by ECAP were limited to $\varphi12mm$ in transverse direction. SP tests were performed with specimens in longitudinal and transverse directions of Al 2024 ECAP metal. For comparing the strength values with those assessed by SP tests, uniaxial tensile tests were also conducted with specimens in longitudinal direction. Failure surfaces of the tested SP specimens showed that failure mode was shear deformation and Al 2024 ECAP metal has an anisotropy in strength. Thus, conventional equations proposed for assessing the strength characteristics were improper to assess those of Al2024 ECAP metal. In this paper a way of assessing the strength of Al 2024 ECAP metal was proposed and was proven to be effective.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.257-267
• /
• 2008

본 연구에서는 강섬유보강 콘크리트 휨부재에 적용할 수 있는 휨강도 산정식과 전단강도 제안식을 분석하였으며, 보다 정확성과 안전성이 향상된 전단강도 산정식이 필요한 것으로 판단되어 새로운 전단강도 제안식을 도출하였다. 휨강도 산정식은 휨파괴한 36개의 실험체를 대상으로 검토해본 결과 기존의 콘크리트보에서 무시되는 콘크리트의 인장강도를 고려하는 것이 타당한 것으로 나타났으며, 제안된 휨강도 약산식은 실험 결과와 공칭휨강도 산정식과 비교할 때 양호한 수준의 강도 예측이 가능하다고 사료된다. 또한 본 연구에서 제안한 전단강도 산정식과 기존 연구자의 전단강도 제안식을 전단파괴한 실험체의 최대강도와 비교, 검토한 결과에 의하면, 본 연구의 제안식이 정확성과 안전성을 모두 확보하면서 전단강도를 예측하는 것으로 평가되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.97-98
• /
• 2009

본 연구에서는 비균열 콘크리트에 설치되는 후설치 앵커의 인장 및 전단 시험 방법을 제안하였으며 검증실험을 수행함으로써 앵커의 설계강도를 결정하기 위한 시험방법을 정립하였다.

• Structural Engineering and Mechanics
• /
• 제72권1호
• /
• pp.19-30
• /
• 2019

The mechanical behavior of Fiber Reinforced Cementitious Composites (FRCC) under direct shear is studied through experiment and analytical simulation. The cementitious composite considered contains 55% replacement of cement with fly ash and 2% (volume ratio) of short discontinuous synthetic fibers (in the form of mass reinforcement, comprising PVA - Polyvinyl Alcohol fibers). This class of cementitious materials exhibits ductility under tension with the formation of multiple fine cracks and significant delay of crack stabilization (i.e., localization of cracking at a single location). One of the behavioral parameters that concern structural design is the shear strength of this new type of fiber reinforced composites. This aspect was studied in the present work with the use of Push-off tests. The shear strength is then compared to the materials' tensile and splitting strength values.