• 제목/요약/키워드: tensile index

검색결과 321건 처리시간 0.02초

Pot Life Assessment and Mechanical Property of Fast Curing Polyurethane Developed with Eco-friendly Pre-polymer

  • Joseph, Jessy;Moon, Junho;Kong, Tae Woong;Kim, Dong Ho;Oh, Jeong Seok
    • Elastomers and Composites
    • /
    • 제55권1호
    • /
    • pp.13-19
    • /
    • 2020
  • 4,4'-Methylenebis(2-chlorobenzenamine) (MOCA)-free fast curing polyurethanes were prepared. In this study, the processibility of a fast curing polyurethane system was characterized by assessing the pot life. The obtained pot life of the polyurethane was 6-8 s, indicating that this prepolymer-curative system is appropriate for ribbon flow casting. The influence of the NCO index on the viscosity and mechanical properties was evaluated. The viscosity, tensile strength, tear strength, and hardness of the as-prepared polyurethanes showed an increasing trend, with an increase in the NCO index, whereas the elongation at break increased initially and then decreased with an increase in the NCO index. The gel fraction and crosslink density showed a direct correlation with the NCO index, which substantiated the improved mechanical properties at the higher NCO index. The coefficients of friction and abrasion deteriorated with an increase in the NCO index.

A new rock brittleness index on the basis of punch penetration test data

  • Ghadernejad, Saleh;Nejati, Hamid Reza;Yagiz, Saffet
    • Geomechanics and Engineering
    • /
    • 제21권4호
    • /
    • pp.391-399
    • /
    • 2020
  • Brittleness is one of the most important properties of rock which has a major impact not only on the failure process of intact rock but also on the response of rock mass to tunneling and mining projects. Due to the lack of a universally accepted definition of rock brittleness, a wide range of methods, including direct and indirect methods, have been developed for its measurement. Measuring rock brittleness by direct methods requires special equipment which may lead to financial inconveniences and is usually unavailable in most of rock mechanic laboratories. Accordingly, this study aimed to develop a new strength-based index for predicting rock brittleness based on the obtained base form. To this end, an innovative algorithm was developed in Matlab environment. The utilized algorithm finds the optimal index based on the open access dataset including the results of punch penetration test (PPT), uniaxial compressive and Brazilian tensile strength. Validation of proposed index was checked by the coefficient of determination (R2), the root mean square error (RMSE), and also the variance for account (VAF). The results indicated that among the different brittleness indices, the suggested equation is the most accurate one, since it has the optimal R2, RMSE and VAF as 0.912, 3.47 and 89.8%, respectively. It could finally be concluded that, using the proposed brittleness index, rock brittleness can be reliably predicted with a high level of accuracy.

Sn-1.7Bi-0.7Cu-0.6In 솔더의 특성 연구 (Characteristics of Sn-1.7Bi-0.7Cu-0.6In Lead-free Solder)

  • 박지호;이희열;전지헌;전주선;정재필
    • Journal of Welding and Joining
    • /
    • 제26권5호
    • /
    • pp.43-48
    • /
    • 2008
  • Characteristics of Sn-1.7%Bi-0.7%Cu-0.6%In (hereafter, SBIC) lead-free solder was investigated in this study. The results from SBIC were compared to other lead-free solders such as Sn-3.5%Ag-0.7%Cu (hereafter, SAC), Sn-0.7%Cu (hereafter, SC), and lead-bearing Sn-37%Pb (hereafter, SP) alloy. Tensile properties of bulk solder, wettability, spreading index, bridge and dross were evaluated. As experimental results, tensile strength and elongation of SBIC was 62.5MPa and 21.5%, respectively. The tensile strength was comparable to that of SP solder. The wetting time of SBIC was 1.2 sec at $250^{\circ}C$, and its wetting properties including wetting force were as good as the SAC alloy. However, wettability of the SC was not so good as the SBIC and SAC. The spreading index of SBIC at $250^{\circ}C$ was 71 %, and it was similar level to those of SAC and SC solders. Bridging was not found for all solders of SBIC, SAC and SC in the range from 240 to $260^{\circ}C$. In dross test at $250^{\circ}C$ for an hour, the amount of dross produced from SBIC was about 57% compared to that from SAC.

Objective Meat Quality from Quality Grade and Backfat Thickness of Hanwoo Steers

  • Zhen Song;Inho Hwang
    • 한국축산식품학회지
    • /
    • 제43권3호
    • /
    • pp.531-539
    • /
    • 2023
  • The objective of this study was to determine the effects of quality grade (QG), and back-fat thickness on the carcass traits and meat quality properties of Hanwoo steers. Fifty carcasses were sorted into two QG (QG 1+ and 1) and three back-fat thickness (<10 mm, 10 to 19 mm and ≥19 mm) groups. After investigating the carcass traits (rib eye, back-fat thickness, weight, color, yield index, maturity, marbling score, and texture), the longissimus lumborum muscles from the carcass groups were collected and analyzed for meat quality (pH, color, cooking loss, and moisture), texture profiles [Warner-Bratzler shear force (WBSF), and tensile tests], and fatty acid. Results showed that marbling score (p<0.001), moisture (p<0.05) and tensile tests values (p<0.05) had a significant differences between QG1+ and QG1. No differences in pH, color traits, cooking loss and WBSF values occurred between the QG groups. Regarding the back-fat thickness effect, we observed that the carcass weight, yield index (p<0.001), yield grade (p<0.001) and marbling score (p<0.05) had a significant differences among the back-fat thickness groups. Regarding the meat quality, moisture content and WBSF values (p<0.01) among the back-fat thickness groups. The back-fat thickness did not affect the pH, color, cooking loss and tensile tests. The QG and back-fat thickness did not affect the fatty acids contents (p>0.05). It may be concluded that the carcass traits and meat quality were significantly affected the QG and back-fat thickness.

축방향 인장을 받는 콘크리트 부재의 FRP 보강근의 인장강화 효과 (Tension Stiffening Effect in Axially loaded Concrete Member Oncrete Member)

  • 장낙섭;노치훈;오홍섭
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권6호
    • /
    • pp.47-54
    • /
    • 2023
  • 본 연구에서는 GFRP, BFRP와 CFRP 보강근으로 보강된 콘크리트 시험체의 인장 거동 특성을 실험적으로 분석하였다. FRP 보강근의 인장강도는 설계강도와 유사하게 나타났으나, 탄성계수는 다소 낮게 측정되었다. 또한 인장강화 시험체는 OPC와 SFRC를 사용하여 150(W)×150(B)×1000(H) mm의 크기로 제작하였다. 균열간격은 탄성계수가 낮고 표면이 보다 매끄러운 GFRP 보강근이 가장 크게 나타났으며, 표면이 다소 거친 BFRP와 탄성계수가 높은 CFRP 보강근의 균열간격은 비슷하게 분석되었다. 하중-변형률관계에서도 GFRP보강근은 균열후 다소 급격한 거동을 보인것에 반하여 BFRP와 CFRP 보강근은 균열발생시 다소 안정적인 거동후 일정수준은 인장강화 효과를 유지하였다. 인장강화지수의 경우 직경이 증가할수록 인장강화지수는 다소 작게 분석되었으며, BFRP보다 GFRP의 경우가 인장강화지수는 높게 분석되었다.

고분자 코팅 처리된 마이크로 펄프가 종이 물성에 미치는 영향 (Effects of Polymer Coated Micro pulp on Paper Properties)

  • 손동진;김학상;김봉용
    • 펄프종이기술
    • /
    • 제42권1호
    • /
    • pp.48-53
    • /
    • 2010
  • Commercial micro pulps(Arbocel) were coated with three kinds of polymers using spray method. These coated micro pulps were used to papermaking additives to evaluate retention, drainage and physical properties of paper. The retention and drainage were improved with addition of polymer coated micro pulp. The bulk index of paper was also increased, but tensile and tear strength were decreased slightly, probably due to weakening of internal bonding. These results showed that the use of polymer coated micro pulp was an effective method to improve retention, drainage and bulk index of paper.

변형율에 따른 AZ31 합금의 변형율 속도 민감도 지수 변화와 미세조직 특성에 관한 연구 (The Study of the Variation of Strain Rate Sensitivity Index depending on the Strain and Microstructural Observations of AZ31 Mg Alloy Sheet)

  • 김동옥;강찬우;이수연
    • 소성∙가공
    • /
    • 제20권7호
    • /
    • pp.498-503
    • /
    • 2011
  • The strain rate sensitivity index, m, plays an important role in plastic deformation at elevated temperatures. It is affected by strain rate, temperature, and the microstructure of the material. The strain rate sensitivity index has been used as a constant in numerical analysis of plastic forming at a specified strain rate and temperature. However, the value of m varies as deformation proceeds at an elevated temperature and a certain strain rate. Thus, in this present study, the value of m has been characterized as a function of strain by multiple tensile jump tests for AZ31 magnesium alloy sheet, and the variation of m has been discussed in conjunction with the microstructural observations before and after deformation. The experimental results show that the variation of m is dependent on the temperature and strain rate. Grain growth with dynamic recrystallization also affects the variation of m.

Machine learning-based regression analysis for estimating Cerchar abrasivity index

  • Kwak, No-Sang;Ko, Tae Young
    • Geomechanics and Engineering
    • /
    • 제29권3호
    • /
    • pp.219-228
    • /
    • 2022
  • The most widely used parameter to represent rock abrasiveness is the Cerchar abrasivity index (CAI). The CAI value can be applied to predict wear in TBM cutters. It has been extensively demonstrated that the CAI is affected significantly by cementation degree, strength, and amount of abrasive minerals, i.e., the quartz content or equivalent quartz content in rocks. The relationship between the properties of rocks and the CAI is investigated in this study. A database comprising 223 observations that includes rock types, uniaxial compressive strengths, Brazilian tensile strengths, equivalent quartz contents, quartz contents, brittleness indices, and CAIs is constructed. A linear model is developed by selecting independent variables while considering multicollinearity after performing multiple regression analyses. Machine learning-based regression methods including support vector regression, regression tree regression, k-nearest neighbors regression, random forest regression, and artificial neural network regression are used in addition to multiple linear regression. The results of the random forest regression model show that it yields the best prediction performance.

결합재의 물리적 성질을 이용한 샌드아스팔트 혼합물의 강도특성 추정 (Estimation of Mechanical Properties of Sand Asphalt Concrete based on Physical Properties of Binder)

  • 김광우;이순제;이기호;이성훈;이병덕
    • 한국도로학회논문집
    • /
    • 제4권1호
    • /
    • pp.149-159
    • /
    • 2002
  • 본 연구에서는 아스팔트 바인더의 절대점도, 동점도, 침입도, 연화점, PG 고온등급을 이용하여 샌드아스팔트 흔합물의 고속 직접인장강도(DTS1), 저속 직접인장강도(DTS2), 간접인장강도(ITS), 회복탄성계수(MR), 강성지수(SI)를 추정하기 위한 연구를 수행하였다. 여러 가지 혼합물의 특성 중 DTS2가 가장 상관성이 높게 나타났으며 그 다음이 DTS1, ITS, SI, MR 순인 것으로 나타났다. 바인더 성질 중에는 PG 등급이 DTS2와 가장 높은 상관 관계를 보여 PG 고온등급이 높은 바인더를 사용하면 직접인장강도가 어느 정도 우수한 혼합물을 얻을 수 있음을 알 수 있었다. 하지만 각각의 물리적 성질만으로는 신뢰도가 낮아 종합적으로 여러 물성을 이용하여 상관성을 분석하였다. 그 결과 직접 및 간접인장강도는 결정계수가 0.99 이상인 모델을 얻을 수 있었다. 그리고 MR, SI 값의 추정치 모델도 R2이 0.91 및 0.93 이상이어서 상당한 신뢰성을 가지고 물성으로부터 역학적 특성을 추정할 수 있음을 보여준다.

  • PDF

단파장 자외선(254 nm)에 노출된 고밀도 폴리에틸렌 수지의 카르보닐 지수(CI)와 기계적 물성 변화의 관계에 관한 연구 (A Study on the Relationship of Change of Mechanical Properties and Carbonyl Index Induced through Short-wavelength Ultraviolet Radiation (254 nm) for High Density Polyethylene)

  • 김창환;신진용
    • 공업화학
    • /
    • 제24권2호
    • /
    • pp.138-143
    • /
    • 2013
  • 화학적 열화를 빠르게 유도할 수 있는 단파장의 자외선(254 nm)을 고밀도 폴리에틸렌의 표면에 조사하여, 생성된 carbonyl band의 변화로부터 기계적 물성 변화를 예측할 수 있는 지에 대한 가능성을 연구하였다. 오랜 시간이 요구되는 자연 태양광에 의한 옥외폭로시험이나, 제논-아크 광원에 의한 광 열화 대신에 광양자 에너지가 높은 UVC 램프를 사용함으로써, 유도되는 광열화의 화학적 특성이 동일한 기계적 물성 변화를 유발하는지를 확인하는 것에 본 연구의 의미가 있다. 인장시험과 크리프-파괴시험으로 진행된 고밀도 폴리에틸렌의 기계적 강도는 CI 변화에 유사한 양상을 보였으며, 특히 항복강도와 신장률은 자외선 노출시간과 밀접한 관계가 있음을 보여주었다. 따라서 빠른 표면 열화를 유발하는 UVC 램프를 활용한 카르보닐 지수와 기계적 물성 변화의 관계를 통하여 장시간이 요구되는 옥외에서의 기계적 물성변화를 보다 빠르게 파악할 수 있는 방법을 제시하였다.