• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.434-444
• /
• 2021

This study investigated the overall dependence of the tensile properties of Al-Si alloys on the distribution aspect of a eutectic Si particle in terms of defect susceptibility to the effective void area fraction, referring to the sum of pre-existing microvoids and the damage evolution of the Si particle. The network morphology of as-cast Al-xSi (x=2,5,8,11) alloys was modified to a granular type via a T4 treatment, after which a computational topography (CT) analysis and scanning electron microscope (SEM) observations were utilized to evaluate the size and distribution of the microvoids. The CT and SEM analyses indicated that the main cracks grow along local regions that possess the highest porosity level. The local plastic deformation around the microvoids and the distribution aspect of the microvoids induced a practical difference between the iso-volumetric CT measurement and the SEM fractography outcomes. The results demonstrated that the overall dependence of the ultimate tensile strength (UTS) and elongation on the effective void area fraction is more sensitive to the variation of the area fraction of the Si particle in the network morphology than in the granular type; this is due to the sequential damage evolution of the neighboring Si particles in the eutectic Si colony.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.2
• /
• pp.237-243
• /
• 1978

Dermatophytes such as Trichophyton mentagrophytes, Trichophyton rubrum and Epidermophyton floccosum are used in this study to confirm (a) The Dermatophytes could utilize the wool, cotton and nylon fiber as a nutrient source. (b) The degree of damage of fibers by the Dermatophytes growth. The results of the experiment are summarized as follows; 1. Dermatophytes could not utilize the wool, cotton and nylon fiber directly as a nutrient source without the exogenously applied nutrients. 2. It was presumed that Dermatophytes could utilize the knitted wool fabric as their nutrient source when nutrient was exogenously applied. since the knitted wool fabric was greatly damaged by T. mentagrophytes and T. rubrum growth. 3. The tensile strength of knitted wool fabric was significantly decreased by T. mentagrophytes and T. rubrum, but not by E. floccosum. However, the tensile strength of knitted nylon fabric was not particularly affected by the Dermatophytes. 4. The burst strength of knitted wool fabric was decreased by T. mentagrophytes ($77\%$). T. rubrum ($53\%$). and E. floccosum ($15\%$). Though the burst strength of knitted cotton fabric was decreased by Dermatophytes about $20\%$, that of knitted nylon fabric was not affected. 5. Observing the damaged wool fiber by scanning microscope, the inner part of wool fiber was permeated by T. mentagrophytes and T. rubrum.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.265-272
• /
• 2018

A detailed study was carried out on the tensile properties of the single-lap joint of a steel panel bolted/bonded to a composite laminate with a flanging. Finite element model (FEM) was established to predict the strength and to analyze the damage propagation of the hybrid joints by ABAQUS/Standard, which especially adopted cohesive elements to simulate the interface between the laminate and adhesive. The strength and failure mode predicted by FEM were in good agreement with the experimental results. In addition, three influence factors including adhesive thickness, bolt preload and bolt-hole clearance were studied. The results show that the three parameters have effect on the first drop load of the load-displacement curve, but the effect of bolt-hole clearance is the largest. The bolt-hole clearance should be avoided for hybrid joints.

• Advances in aircraft and spacecraft science
• /
• v.5 no.5
• /
• pp.595-613
• /
• 2018

The objective of our study is to analyze the behavior of bonded, riveted and hybrid (bonded / riveted) steel / steel assemblies by tensile tests and to show the advantage of a hybrid assembly over other processes. the finite element method with the ABAQUS numerical code was used to model the fracture behavior of the different assemblies. Cohesive zone models (CZM) have been adopted to model crack propagation in bonded joints using a bilinear tensile separation law implemented in the ABAQUS finite element code. The riveted assemblies were modeled with the XFEM damage method identified in this ABAQUS numerical code. Both CZM and XFEM methods are combined to model hybrid assemblies. The results are consistent with the experimental results and make it possible to guarantee the validity of the applied numerical model. The use of a hybrid assembly shows a high resistance compared to other conventional methods, where the number of rivets has been highlighted. The use of the hybrid assembly improves mechanical strength and increases service life compared to a single lap joint and a riveted joint.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.285-290
• /
• 2012

In spite of progress in predicting ductile failure, the development of a macroscopic yield criterion to describe damage evolution in HCP (hexagonal close-packed) materials remains a challenge. HCP materials display strength differential effects (i.e., different behavior in tension versus compression) in their plastic response due to twinning. Cazacu and Stewart(2009) developed an analytical yield criterion for porous material containing randomly distributed spherical voids in an isotropic, incompressible matrix that shows tension-compression asymmetry. The goal of the calculations in this paper is to investigate the effect of the tension-compression asymmetry on necking induced by void nucleation, evolution and consolidation. In order to investigate the effect of the tension-compression asymmetry of the matrix on necking and fracture initiation, three isotropic materials A, B, and C were examined with different ratios of tension-compression asymmetry. The various types of material had BCC, FCC, and HCP crystal structures, respectively. The ratio between tension and compression in plastic flow significantly influences the fracture shape produced by damage propagation as well as affecting the localized neck.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.57-62
• /
• 2008

The aim of this investigation was to extract the fatigue properties at the designated fatigue life of copper foil and observe the mean stress and stress amplitude effects on both the fatigue life and the corresponding surface morphology. Tensile tests were performed to determine the baseline monotonic material properties of the proportional limit and ultimate tensile strength. Constant amplitude fatigue tests were carried out using a feedback-controlled fatigue testing machine. The mean stress and the stress amplitude were changed to obtain the complete nominal stress-life curves. An atomic force microscope was utilized to observe the relationship between the fatigue damage and the corresponding changes in surface morphology. A Basquin's exponent of-0.071 was obtained through the fatigue tests. An endurance limit of 122 MPa was inferred from a Haigh diagram. The specimen surface became rougher as the number of fatigue cycles increased, and there was a close relationship between the fatigue damage and the surface roughness evolution.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.436-449
• /
• 2017

In this paper, the damage and failure behavior of triaxially braided textile composites was studied using progressive failure analysis. The analysis was performed at both micro and meso-scales through iterative cycles. Stress based failure criteria were used to define the failure states at both micro- and meso-scale models. The stress-strain curve under uniaxial tensile loading was drawn based on the load-displacement curve from the progressive failure analysis and compared to those by test and computational results from reference for verification. Then, the detailed failure initiation and propagation was studied using the verified model for both tensile and compression loading cases. The failure modes of each part of the model were assessed at different stages of failure. Effect of ply stacking and number of unit cells considered were then investigated using the resulting stress-strain curves and damage patterns. Finally, the effect of matrix plasticity was examined for the compressive failure behavior of the same model using elastic, elastic - perfectly plastic and multi-linear elastic-plastic matrix properties.

• Journal of Ceramic Processing Research
• /
• v.23 no.4
• /
• pp.436-442
• /
• 2022

Gallium nitride (GaN) substrates were ground in two different grinding wheel abrasive sizes of 270 and 800-mesh, and thechange in surface morphologies of the substrates and the depth of subsurface damage (SSD) were observed. With the 800-meshgrinding wheel, the surface roughness (SR) and the depth of SSD of the sample tended to decrease, which was not the casewith the 270-mesh grinding wheel. In the X-ray rocking curve, the sample exhibited some compressive stress with the 270-meshgrinding wheel, but with the 800-mesh grinding wheel, it demonstrated the occurrence of tensile stresses in the sample and adecrease in full width at half maximum (FWHM), which confirms an improvement in the crystallinity. In the Raman spectra,the compressive stress of the 270-mesh grinding wheel and the tensile stress of the 800-mesh grinding wheel were confirmedthrough peak shifts. Photoluminescence (PL) spectra confirmed that the intensity ratio of the yellow luminescence increasedat the 800-mesh grinding wheel, and a blue shift occurred further. These results indicate that the SR and the depth of SSDwere proportional to the abrasive grain size of the grinding wheel. At the same time, the increase in PL intensity at specificpeak positions indicates that the stress stemming from the grinding process was concentrated at the crystal surface. The abovemechanism is illustrated in a schematic diagram, which confirms the possibility of improving the grinding efficiency andsubsequent polishing processes in future applications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.99-104
• /
• 2002

This paper presents an analytical prediction of the fatigue damage of reinforced concrete bridge columns subjected to cyclic load. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. The smeared crack approach is incorporated. In boundary plane at which each member with different thickness is connected, local discontinuity in deformation due to the abrupt change in their stiffness can be taken into account by introducing interface element. The effect of number of load reversals with the same displacement amplitude has been also taken into account to model the reinforcing steel and concrete. The proposed numerical method for fatigue damage of reinforced concrete bridge columns subjected to cyclic load is verified by comparison with reliable experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.254-257
• /
• 2006

In the last few years, ductile fracture criteria based on various hypotheses have been developed and utilized with FEM to predict forming failure. The accurate deformation analysis by the FEM and the decision of damage parameters are the most important factors in these approaches. In this paper, several conventional integral forms of fracture criteria were introduced and the test method to determine damage parameters by using notched specimen was suggested. Based on the results, damage parameters obtained under the different stress system (tensile and compression) are compared and analyzed.