• Restorative Dentistry and Endodontics
• /
• 제30권4호
• /
• pp.283-293
• /
• 2005

본 연구는 합착 술식에 따른 레진 합착제의 상아질에 대한 미세전단결합강도를 비교 연구하여 이중 접착 술식의 유용성을 평가하고자 시행되었다. 합착 술식은 전통 합착 술식과 이중 접착 술식, 임시 합착제는 Propac과 Freegenol, 상아질 접착제는 All-Bond 2, One-Step, Clearfil SE Bond를 사용하였다. 이중 접착 술식을 적용한 군에서만 상아질 접착제 처리 후, 모든 시편에 임시 합착제를 도포하였다. 이후 임시 합착제를 제거하고 상아질 접착제 적용 후 유리봉에 레진 합착제를 도포하여 상아질 면에 접착하였다. 미세전단결합 강도를 측정하고 접착 계면을 주사전자현미경으로 관찰하였다. 1. 전통 합착 술식이 이중 접착 술식보다 높은 미세전단결합강도를 보였으나 통계학적 유의 차가 없었다. 2. Freegenol이 Propac보다 높은 미세전단결합강도를 보였으나 유의차가 없었다. 3. 미세전단결합강도는 이중 접착 술식 을 적용한 경우 Clearfil SE Bond가 One-step, All-Bond 2보다 유의성 있게 높았으나(p<0.05) One-step, All-Bond 2 간 유의차는 없었다. 4. 전자현미경 소견에서 All-Bond 2와 One-Step을 사용한 군은 길고 수많은 resin tag가 관찰되었다. 본 연구 결과 전통 합착 술식과 비교하여 이중 접착 술식의 우수함을 확인하지 못하였다.

• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.45-53
• /
• 1987

The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.389-393
• /
• 2002

The marginal integrity of the crown can be broken during endodontic access cavity preparation due to the vibration of burs. Therefore, the purpose of this study was to evaluate the effect of endodontic access cavity preparation on the marginal leakage of full veneer gold crowns. 24 intact molars were mounted in acrylic resin blocks and prepared for crowns by a restorative dentist and crowns were cast with gold alloy. 20 Crowns were cemented with glass ionomer cement and 2 crowns were not cemented for positive control. 200 thermo-cycles from 5$^{\circ}C$ to 5$0^{\circ}C$ with a travel time of 20s were completed. Then samples were randomly divided into 2 experimental groups of 9 each. Endodontic access preparation and zinc-oxide eugenol temporary fillings were done in Group 1. Teeth in Group 2 were not treated. Samples were coated with 2 layers of nail varnish and were immersed in 1% methylene blue dye for 20 hrs. Endodontic access was prepared in 2 samples, which were coated with nail varnish on all surfaces for negative control. After washing in running water gold crowns were cut with a #330 bur. Four buccolingual sections, 2 mm apart, were cut from the central section of each tooth and were examined and scored under the microscope for dye leakage. Score 1: leakage to the cervical 1/3 of the axial wall, Score 2: leakage to the middle 1/3 of the axial wall, Score 3: leakage to the coronal 1/3 of the axial wall, Score 4: leakage to the occlusal surface. The median value for Group 1 is 4 and for Group 2 is 2. The result of this study showed that samples in Group 1 leaked more than those in Group 2. This finding was significant(P<0.001).

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.475-483
• /
• 1997

Fracture of the crown in a permanent incisor is relatively common. When it occurs with pulp exposure, it presents both restorative and endodontic problems. In the restoration of a fractured incisor, reattachment of the original fragment or restoration with a composite resin is preferred over a temporary crown. If fractured fragment is intact, the tooth can be restored with reattachment of the fragment. An exposed pulp in a young crown-fractured incisor is usually treated with either pulp capping or pulpotomy depending on the size of an exposure and time elapsed since injury. However, in teeth showing vital and/or hyperplastic pulp tissue at the exposure, only superficial layers of the pulp and surrounding dentin should be removed : i.e. partial pulpotomy can be performed in immature as well as mature teeth. This paper reports 2 cases of crown-fractured permanent incisors with pulp exposure that had been treated by reattachment of original fragment followed by partial pulpotomy or partial pulpectomy. The following results are obtained. ; 1. Fragment reattachment is an acceptable semi-permanent restoration of crown fractured young permanent incisor. 2. Partial pulpotomy is recommended as the treatment of choice in crown-fractured permanent teeth with pulp exposure.

• Restorative Dentistry and Endodontics
• /
• 제31권2호
• /
• pp.96-102
• /
• 2006

본 연구는 현재 시판중인 $Profile^{(R)},\;ProTaper^{(R)},\;K3^{(R)},\;Hero\;642^{(R)},\;Hero\;Shaper^{(R)}$를 단면을 비교하고 이들 5가지 NiTi 파일과 사용방법에 따른 피로 파절 소요 시간을 비교하고자 시행되었다. 각 NiTi전동파일의 치근단 1/3을 temporary resin에 매몰시키고 다이아몬드 표면처리된 버로 잘라내어, 초음파를 이용하여 세척 후, 주사전자현미경으로 단면을 관찰하였다. 주기적인 피로 실험을 수행하기 위해, 회전속도, pecking 거리를 자동적으로 조절할 수 있는 장치를 제작하고 파일을 만곡된 상태를 재현하기 위하여 15도 경사진 금속 토막에 위치시키고 분당 300회전의 속도로 회전시켜 파일이 파절될 때까지의 시간을 측정하였다. 사용방법에 따른 실험군은 동적군과 정적군으로 나누고 pecking 거리는 3 mm, 6 mm로 하였다. 실험결과 동적군 보다는 정적군의 피로파절 소요시간이 통계학적으로 유의차 있게 짧았으며 3 mm, 6 mm의 pecking distance에 따른 영향은 나타나지 않았다. 결론적으로 NiTi전동파일은 pecking motion으로 사용하는 것이 피로파절을 줄이는데 도움이 될 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.39.1-39.8
• /
• 2019

The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and discoloration of the maxillary left anterior tooth. The maxillary left lateral incisor (tooth #22) showed pulp necrosis and a chronic apical abscess, and a periapical X-ray demonstrated DI on bilateral maxillary central and lateral incisors. All teeth responded to a vitality test, except tooth #22. The anatomic form of tooth #22 was similar to that of tooth #12, and both teeth had lingual pits. In addition, panoramic and periapical X-rays demonstrated root canal calcification, such as pulp stones, in the maxillary canines, first and second premolars, and the mandibular incisors, canines, and first premolars bilaterally. The patient underwent root canal treatment of tooth #22 and non-vital tooth bleaching. After a temporary filling material was removed, the invaginated mass was removed using ultrasonic tips under an operating microscope. The working length was established, and the root canal was enlarged up to #50 apical size and obturated with gutta-percha and AH 26 sealer using the continuous wave of condensation technique. Finally, non-vital bleaching was performed, and the access cavity was filled with composite resin.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.352-368
• /
• 2008

본 연구에서는 치과용 디지털 색상 분석기기 중 하나인 Shadescan (CYNOVAD, Montreal, Canada)의 색상 분석의 정확성과 재현 능력을 평가하였다. 균일한 치아 배열을 가진 20대 성인 남자 8명과 여자 8명의 상악 인상을 고무인상제 (Exaflex, GC, Japan)를 이용하여 채득하고, 인상에 A2 색상의 임시 크라운 제작용 자가중합형 레진을 주입하여 치아 모델을 완성하고, ShadeScan을 이용해 각 치아의 영상을 얻어 컴퓨터의 ShadeScan 프로그램으로 분석하였다. 그리고 측정 결과의 재현 능력를 평가하기 위해 2개의 치아 모델을 임의로 선택하여 각 치아마다 10회의 색상 측정을 시행하여 분석 결과를 비교하였다. 또한 분석된 영상의 동일 shade 간의 색차를 확인하기 위해 광중합 복합레진인 Gradia Direct (GC, Tokyo, Japan)의 shade guide의 CIE $L^*a^*b$ 값을 백색과 흑색 배경판 상에서 spectrophotometer (Spectrolino, GretagMacbeth, USA)로 측정하고, ShadeScan에 의해 동일한 shade로 분석된 shade guide간의 색차를 계산하여 다음의 결과를 얻었다. 모든 치아에서 모델 제작 재료와 동일한 A2 색상으로 분석된 경우는 없었으며, 개개의 치아에서 전체 순면이 동일한 색상으로 분석된 예는 없었다. 또한 동일한 치아군에서 치아의 크기, 형태, 순면의 굴곡 등에 따라 서로 다른 색상 분포를 보였다. 재현성 평가에서 각 치아의 중앙부는 비교적 일정한 재현성을 보였으나, 절단부와 주변 부위는 재현성이 낮았으며, 동일한 shade로 분석된 shade guide 간에는 3 이상의 색차 (${\Delta}E^*$)를 보였다. 이상의 결과는 치과용 디지털 색상 분석기기는 비록 높은 재현 능력은 가지고 있지만 정확성에 오류가 있음을 시사하며, 따라서 이러한 기기를 이용한 색상 분석 시 좀 더 세밀한 주의와 다른 방법의 추가 사용이 필요하리라 사료된다.