• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.59-66
• /
• 1991

This study was designed to investigate the marginal accuracy of resin temporary crown with different matrix in indirect technique. Matrices were made from irreversible hydrocolloid impression material, putty type of vinyl polysiloxane silicone rubber and vacuum formed plastic sheet. The marginal discrepancies of the temporary crowns were measured using a measuring microscope. The obtained results were as follows 1. The marginal accuracy temporary crown using vinyl polysiloxane silicone rubber or vacuum formed plastic form was better than that of the temporary crown using irreversible hydrocolloid impression material. 2. The marginal accuracies of the temporary crown using the irreversible hydrocolloid impression material and putty type of the vinyl polysiloxane silicone rubber obtained the best results at the distal measuring point. 3. The vacuum formed plastic form was recorded a more acceptable marginal accuracy at the distal and mesial measuring points.

• 치위생과학회지
• /
• 제22권3호
• /
• pp.139-147
• /
• 2022

Background: Temporary crown resins are used prior to prosthesis placement, indicating the importance of aesthetics. The aim of this study was evaluate the color stability of various staining solutions according to the color of temporary crown resins using VITA Easyshade^Ⓡ V. Methods: The temporary crowns used were the powder-liquid type and included four shades. A total of 36 specimens were fabricated in the form of disks with a diameter of 1.8 mm and a depth of 2 mm. They were divided into four groups of nine each, and staining was performed for seven days by precipitation in 3 mL of three staining solutions composed of distilled water, black coffee, and red wine. Color and color stability evaluations were performed by a trained examiner using a digital spectrophotometer (VITA Easyshade^Ⓡ V). Color stability was analyzed using the ΔE value. Results: Because of the color stability evaluation using the ΔE value, the difference between three and seven days was significant in the specimen I and III groups (p<0.05). Further, post hoc analysis showed that the ΔE value of red wine was significant, indicating that the color stability in red wine was low. The ΔE values in group II between days three and seven were statistically significant (p<0.05). Post hoc analysis showed that distilled water, coffee, and wine had the highest ΔE values on day three. On day seven, the ΔE value for wine was significant, and the color stability was low. There was no significant difference in group IV according to the staining period and staining solution; therefore, color stability was high (p>0.05). Conclusion: This study showed that most temporary resin restorations exhibited color stability in the staining solution. The darker the color of the temporary resin restoration, the higher the color stability against extrinsic staining.

• 구강회복응용과학지
• /
• 제22권4호
• /
• pp.329-340
• /
• 2006

Statement of problem: Damping of the peak force transmitted to implants has been reported by in vitro studies using impact forces on resin-veneered superstructures. Theoretical assumptions suggest that use of acrylic resin for the occlusal surfaces of a prosthesis would protect the connection between implant and bone. Therefore, the relationship between prosthesis materials and the force transmitted through the implant system also needs to be investigated under conditions that resemble the intraoral mechanical environment. Purpose: The purpose of this study was to analyze the fracture strength and modes of temporary prosthesis when a flange or occlusally extended structure were connected on the top of the abutment. Material and method: Modified abutments of winged and bulk design were made by casting the desired wax pattern which is made on the UCLA type plastic cylinder. Temporary crowns were made using templates on the modified abutments, and its fracture toughness and strain were compared to the traditional temporary prosthesis. To evaluate the effect of aging, 5.000 times of thermocycling were performed, and their result was compared to the 24hours specimen result. Results: The following conclusions were drawn from this study: 1. In the fracture toughness test, temporary crown's fracture line located next to the screw hole while modified designs with metal support showed fracture line on the metal and its propagation along the metal-resin interface. 2. Wing and bulk structure didn't show significant difference in the fracture toughness (p>0.05), but wing structure showed stress concentration on the screw hole area compared to bulk structure which showed even stress distribution. 3. In the fracture toughness test after thermocycling, wing and bulk structure showed increased or similar results in metal supported area while off-metal area and temporary crown showed decreased results. 4. In the strain measurement after thermocycling, its value increased in the temporary and bulk structure. However, wing structure showed decreased value in the loading point while increased value in the screw hole area. Conclusion: Wing type design showed compatible result to the bulk type that its application with composite resin prosthesis to the implant dentistry is considered promising.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.475-483
• /
• 1997

Fracture of the crown in a permanent incisor is relatively common. When it occurs with pulp exposure, it presents both restorative and endodontic problems. In the restoration of a fractured incisor, reattachment of the original fragment or restoration with a composite resin is preferred over a temporary crown. If fractured fragment is intact, the tooth can be restored with reattachment of the fragment. An exposed pulp in a young crown-fractured incisor is usually treated with either pulp capping or pulpotomy depending on the size of an exposure and time elapsed since injury. However, in teeth showing vital and/or hyperplastic pulp tissue at the exposure, only superficial layers of the pulp and surrounding dentin should be removed : i.e. partial pulpotomy can be performed in immature as well as mature teeth. This paper reports 2 cases of crown-fractured permanent incisors with pulp exposure that had been treated by reattachment of original fragment followed by partial pulpotomy or partial pulpectomy. The following results are obtained. ; 1. Fragment reattachment is an acceptable semi-permanent restoration of crown fractured young permanent incisor. 2. Partial pulpotomy is recommended as the treatment of choice in crown-fractured permanent teeth with pulp exposure.

• 치위생과학회지
• /
• 제16권2호
• /
• pp.150-156
• /
• 2016

이번 연구는 자가중합 임시치관용 레진의 표면 처리와 음식에 따른 색 안정성 확인을 위해 설계되었으며 ethyl methacrylate형의 SNAP 시편에 denture bur polishing, silicone bur polishing, pumice polishing의 3단계 표면 처리 후 커피와 콜라, 된장과 고추장, 레드 와인과 맥주에 침전한 블럭을 분광광도계로 관찰하여 초기 값과 비교한 ${\Delta}E^*$값을 알아보았다. 모든 시편에서 침전 시간과 표면 처리에 따라 나타난 착색의 차이는 시간의 변화에 따라 색 변화가 관찰되었다(p<0.001). 커피는 1일($2.59{\pm}1.08$), 5일($3.89{\pm}0.83$), 7일($4.53{\pm}0.22$) 모두 pumice polishing이 색 변화가 가장 많았다. 콜라는 1일($2.53{\pm}0.55$)과 5일($4.75{\pm}0.94$) pumice polishing이 색 변화가 가장 많았고, 7일($5.28{\pm}0.25$)은 denture bur polishing이 색 변화가 가장 많았다. 고추장은 1일($6.38{\pm}0.61$)과 5일($10.4{\pm}7.58$) silicone bur polishing이 색 변화가 가장 많았고 7일($12.44{\pm}2.82$)은 denture bur polishing이 색 변화가 가장 많았다. 반면 pumice polishing에서는 1일($6.09{\pm}1.03$), 5일($4.9{\pm}2.37$), 7일($5.33{\pm}0.64$) 모두 색 변화가 가장 적게 나타났다. 된장은 1일($1.37{\pm}0.35$)과 7일($4.98{\pm}0.55$)은 pumice polishing이 색 변화가 많았으며, 5일($2.61{\pm}0.38$)은 denture bur polishing이 색 변화가 가장 많았다. 레드 와인은 denture bur polishing이 1일($4.78{\pm}1.10$), 5일($12.69{\pm}3.06$), 7일($13.48{\pm}2.08$) 모두 색 변화가 가장 많았고, pumice polishing에서 1일($2.66{\pm}0.39$), 5일($8.56{\pm}0.16$), 7일($8.77{\pm}0.22$) 모두 색 변화가 가장 적게 나타났다, 맥주는 pumice polishing이 1일($4.15{\pm}0.47$), 5일($4.12{\pm}0.37$), 7일($4.53{\pm}0.89$) 모두 색 변화가 가장 많았으며 반면 silicone bur polishing이 1일($1.27{\pm}1.1$), 5일($2.3{\pm}0.32$), 7일($2.48{\pm}0.46$) 모두 색 변화가 가장 적게 나타났다. 이와 같이 자가중합 레진의 임시치관 색 안정성 제공을 위해 음식 섭취에 대한 주의가 필요하다. 선호 음식의 종류에 따라 표면 처리 방법을 선택할 수 있으며, 장기간의 임시치관 사용 시 주기적인 재제작도 고려할 필요가 있겠다.

• The Journal of Advanced Prosthodontics
• /
• 제15권2호
• /
• pp.72-79
• /
• 2023

PURPOSE. The purpose of this in vitro study was to compare the accuracy of various 3D printers and a milling machine. MATERIALS AND METHODS. The die model was designed using CAD (Autodesk Inventor 2018 sp3). The 30 ㎛ cement space was given to the die and the ideal crown of the mandibular left first molar was designed using CAD (ExoCAD). The crowns were produced using the milling machine (Imes-icore 250i) and the 3D printers (Zenith U, Zenith D, W11) and they were divided into four groups. In all groups, the interior of each crown was scanned (Identica blue) and superimposed (Geomagic Control X) with the previously designed die. The difference between the die and the actual crown was measured at specific points. The Kruskal-Wallis test, the Mann-Whitney test, and Bonferroni's method were performed with a statistical analysis software (P < .008 in inter-group comparison P < .001 in intra-group comparison). RESULTS. In all groups, the center of the occlusal area and the anti-rotational dimple area showed significantly greater difference and the marginal area showed the smallest difference comparatively. The mean value of the difference in each area and the sum of the differences were higher in order of W11, Imes-icore 250i, Zenith D, and Zenith U. CONCLUSION. The digital light processing (DLP) method shows higher accuracy compared to the sereolithography (SLA) method using the same resin material.

• 치위생과학회지
• /
• 제12권4호
• /
• pp.342-347
• /
• 2012

본 연구는 임시치관을 장착하고 있는 기간 동안에 커피의 노출을 피하기 어려운 점을 감안하고자 자가 중합형 임시치관용 레진의 시편을 제작하여 증류수와 3종의 커피에 담가 각각의 변색정도를 색상 측정 기구를 사용하여 색 안정을 비교하고자 하였다. 본 연구에서는 임시치관 제작 시 주로 사용되는 자가중합형 임시치관용 레진의 색 안정성을 살펴보고자 증류수와 3종류의 커피용액에 담가 1일, 7일, 14일, 21일, 28일 후 색변화를 분광광도계를 이용하여 CIE 표색계에 따라 명도지수 ${\Delta}L^*$, 적색채도 ${\Delta}a^*$, 황색채도 ${\Delta}b^*$, 색차 ${\Delta}E^*$를 측정하여 다음과 같은 결과를 얻었다. 1. 명도지수($L^*$) 변화는 침지시간이 증가할수록 증류수와 아메리카노, 카페라떼, 바닐라라떼의 명도가 유의하게 감소하였다(p<.001). 아메리카노에서의 명도가 가장 크게 감소하는 경향이 나타났으며 카페라떼, 바닐라라떼, 증류수 순이었다. 2. 적색채도($a^*$) 변화는 침지시간이 증가할수록 적색채도가 증가하는 경향을 보였으나 아메리카노, 카페라떼에서의 적색채도는 통계적으로 유의한 차이가 있었고 증류수와 바닐라라떼에서는 유의하지 않았다(p<.05). 3. 황색채도($b^*$) 변화는 침지시간이 증가할수록 황색채도가 증가하는 경향을 보였으나 카페라떼를 제외한 증류수, 아메리카노, 바닐라라떼에서의 황색채도는 통계적으로 유의한 차이가 없었다(p<.05). 4. 색차(${\Delta}E^*$) 변화는 침지시간이 증가할수록 아메리카노>카페라떼>바닐라라떼의 순서로 변색이 나타났으며 통계적으로 유의한 차이가 있었다(p<.05). 아메리카노에서는 침지 28일 이후에 색차가 3.3을 초과하여 수용도 역치 이상의 변색이 나타났으나 카페라떼와 바닐라라떼에서는 침지 28일 이후에도 1~2정도로 육안으로는 구분하기 어려운 변색이 나타났다. 증류수에서는 색차(${\Delta}E^*$) 값에 통계적으로 차이가 없었다(p>.05).

• The Journal of Advanced Prosthodontics
• /
• 제16권4호
• /
• pp.231-243
• /
• 2024

PURPOSE. The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments. MATERIALS AND METHODS. For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases. The color of each restoration and surrounding artificial gingiva was measured spectrophotometrically at predefined measuring points and the CIELAB (ΔE_ab) color scale values were recorded. RESULTS. The color outcome of ceramic crowns bonded to hybrid abutments and soft tissues was affected differently by cements of different brands. Grit-blasting of Ti-bases prior to cementing CAD-CAM copings affected the color results of allceramic crowns. There was a significant difference (P = .038) for the median ΔE value between blasted and non-blasted reconstructions at the cervical aspect of the crown. Full-ceramic crowns on zirconia Ti-base abutments exhibited significantly lower ΔE values below the threshold of visibility (ΔE 1.8). In all subcategories tested, the use of a highly opaque temporary cement demonstrated the lowest median ΔE for both the crown and the artificial gingiva. CONCLUSION. Various cements, core ceramic materials and airborne particle abrasion prior to bonding can adversely affect the color of Ti-base supported ceramic crowns and peri-implant soft tissue. However, zirconia CAD-CAM copings and an opaque cement can effectively mask this darkening.

• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.204-209
• /
• 2003

9세된 남아가 불안정한 교합을 주소로 내원하였다. 환아의 제1대구치는 치아우식증으로 광범위하게 치관이 파괴되어 환아는 자신의 교두감합위를 찾지 못해 하악을 변위시키면서 교합을 하였고 폐구시마다 동일한 위치로 다물지를 못하였다. 임상검사와 방사선 검사를 통하여 제1대구치에 크라운 수복을 하여 안정적인 교합으로 교합재건을 해주기로 하였다. 치료에 앞서 안정위로 유도하여 환아에게 안정위로 폐구하도록 교육하였고, 근첨형성술(apexification)을 포함한 근관치료와 interocclusal space확보를 위한 치관연장술과 수직고경의 거상을 계획하였다. 근관치료와 치관연장술 후 보철물 제작을 위해 치아를 삭제하고 안정위를 기준으로 수직고경을 증가시켜 임시치관을 제작 및 장착하고 1개월 동안 적응여부를 관찰하였다. 1개월 후 악관절장애등의 증상이 없어 크라운을 제작하였고, 이를 다시 임시장착하고 1개월동안 관찰하여 아무런 증상이나 불편감이 없어 최종접착을 하였다. 크라운을 최종장착한지 4개월 후 검사에서 환아는 안정적인 교합을 형성해가고 있었고, 크라운을 처음 장착했을 때 보였던 전치부 개방교합도 개선되어 정상적인 수평, 수직피개 교합을 보이고 있었다.