• Journal of Korea Multimedia Society
• /
• v.21 no.6
• /
• pp.678-684
• /
• 2018

In order to broaden the indication of middle ear implant, research has been actively conducted on the reverse output method that stimulates the round window. However, it is very difficult to transmit the vibration output effectively because the indivisual anatomical difference of the round window niche is very large and also the visual field is not secured even by a skilled otolaryngologic surgeon. In this paper, we propose a new reverse stimulation method of middle ear implants that transmits energy to the inner ear by using air as a medium. This can compensate for the disadvantages of the conventional method of transmitting vibration energy and minimizes the energy transfer efficiency interference due to the combination of the excitation point and the output device. It was shown that forward and backward transfer characteristics were obtained by cadaveric experiments, and it was shown that it can overcome the acoustical impedance of high round window and transmit energy to inner ear. The receiver, which is the output device of the conventional hearing aids, can generate a constant volume velocity, so it can have a high output at a limited volume, such as a round window niche. So, suggested method can overcome the high acoustical impedance of the round window and deliver acoustic energy to the inner ear.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.5
• /
• pp.411-422
• /
• 2014

In this study, spatial and temporal variations of radiative forcing (RF) and mean temperature changes due to greenhouse gases ($CO_2$, $CH_4$, and $N_2O$) emitted from commercial aircraft were examined based on the simplified expression at the airports in Korea during 2009~2010. The radiative transfer model (SBDART) was used to compare with the RF and mean temperature changes calculated from the simplified expressions for greenhouse gas $CO_2$. The RF simulated by the SBDART was about 67% higher than that of the simplified expression, on average. The highest mean RF (up to $9.0mW/m^2$ for $CO_2$) and mean temperature changes (up to $9.7{\times}10^{-5}^{\circ}K/day$ for $CO_2$) for all GHGs occurred at Ulsan airport during the study period, whereas the lowest RF and temperature changes at Yangyang (for $CO_2$) and Sacheon airports (for $CH_4$ and $N_2O$). In the case of $CH_4$ and $N_2O$, their effects to the RF and mean temperature change were negligible compared to $CO_2$.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.195-206
• /
• 2009

The deregulation of aviation markets in Europe and the United Sates had led airlines to reconfigure their networks into hub-and-spoke systems. Recent trends of "Open Skies" in the Asian aviation market are also expected to prompt the reformation of airlines' networks in the region. A significant connectivity index is a crucial tool for airlines and airport authorities to estimate the degree of hub-and-spoke operations. Therefore, this paper suggests a new index, Continuous Indirect Connectivity Index (CICI), for measuring the coordination of airlines' flight schedules, applying it to the Asian, European and the American aviation markets. CICI consists of three components：(i) temporal connectivity to identify the attractiveness between connection flights, (ii) spatial connectivity to differentiate the attractiveness by de-routing distance with continuous linear function, and (iii) relative intensity to reflect the effect of direct flight frequency on transfer routes. CICI is evaluated to examine a casual relationship through regression analyses with two dependent variables of the number of transfer passengers and transfer rates. Compared with Danesi's index and Doganis' index through evaluation processes, CICI has a higher coefficient value of determination, implying that it explains the relationship between connectivity and transfer passengers more precisely.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.3
• /
• pp.212-219
• /
• 2009

Medially retracted large-sized rotator cuff tears includes large-sized tears, massive tears and irreparable tears. Generally arthroscopic repair or open repair of rotator cuff tears is used in reparable tears. However, arthroscopic repair requires long period practice and endurance. In irreparable tears, arthroscopic debridement, partial repair, latissimus dorsi transfer and retrograde arthroplasty can be the option. Arthoscopic debridement gives temporal relief who experienced improvement in pain and increase in range of motion after subacromial local anesthetic injection. Also arthroscopic partial repair gives good results in irreparable cases, especially in suprascapular nerve traction neurapraxia. Tendon transfer can be used in mild to moderate muscle weakness in shoulder abduction for long term treatment. Pectoralis major transfer can be used in anterosupeior tears and latissimus dorsi transfer can be used in posterosuperior tears. Reverse shoulder prosthesis is used in extreamly weakened shoulder pseudoparalysis. The authors discussed the method of arthroscopic repair in irreparable tears. The debridement, partial repair, and tendon transfer could be used in medially retracted large-sized rotator cuff tears.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.863-870
• /
• 1993

A new methodology of multimedia data composition generated SRT(Synchronization Relation Tree) dynamically after user composing multimedia date by using high level user interface, and processes message passing protocols to adjust multimedia data temporal composition. In this paperl we propose SRT generating algorithm which transfer user defined timeline diagram to SRT dynamically. SRT generating algorithm is to use divide and conquer methodology and recurvise programming. And prove that it generates and type of multimedia date compositon to SRT.

• Korean Journal of Head & Neck Oncology
• /
• v.1 no.1
• /
• pp.63-74
• /
• 1985

Although regional and myocutaneous flaps are still the standard in head and neck reconstruction. The capacity to transfer distant tissues by microsurgical technique expands the reconstructive surgeon's ability to restore severe deformities of the head and neck. From 1981 to 1985, thirteen patients with extensive defects of the head and neck after extirpative surgery of tumor have been reconstructed utilizing the technique of microsurgical composite tissue transplantation. In this series of patients, six presented with reconstructions in the different region of the head and neck with review of literatures. The results of case analysis are summarized as follows: 1) Transplantation was successful in twelve among thirteen patients (92%). 2) Seven patients presented with malignancy and six with benign tumor. 3) Frequent sites of reconstruction were face and mandible. 4) Fourteen free composite tissue transplantations for reconstruction of thirteen patients were obtained six different tissue compositions from eight different donor sites. 5) The recipient artery and vein was most often superficial temporal or facial vessels. 6) The average time of operation was ten hours.

• 대한미세수술학회:학술대회논문집
• /
• 1992.11a
• /
• pp.66-66
• /
• 1992

• Korean Journal of Remote Sensing
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2013

This present study describes an application of UV scanning spectrometer $O_4$ data for retrieval of aerosol vertical profiles in Seoul during the measurement period that includes two Asian dust event days. The results show large variations of aerosol load in vertical and temporal scales. Large variations in aerosol were observed at 1 km in height during the daytime in the measurement period when the Asian dust events took place. The aerosol load, however, was found to be largest at the surface compared to those retrieved at the higher atmospheric layers. The results also clearly identified the diurnal patterns of aerosol vertical distributions. The aerosol load was high in the morning and noon whereas it was low in the afternoon. This study demonstrates that UV scanning spectrometer observations of the oxygen dimer can serve as a potential method for determination of atmospheric aerosol vertical distributions and optical properties.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.161-167
• /
• 2014

Web caches help to reduce latencies arising from slow networks through storing and reusing what was used before. Repeat access to a cached resource does not incur network latencies. However, resources that have never been used will not be found in the cache. Cache prefetching is a technique that helps to fill a cache with still-unused resources in anticipation that these resources will be used in the near future. Typically these unused resources are related to the resources that have been accessed in the recent past. While web caching exploits temporal locality, prefetching attempts to exploit spatial locality. Access to the prefetched resources will be cache hits, and therefore reduces the latency as perceived by the user. This paper reviews the cache infrastructure supported by the hypertext transfer protocol and discusses web cache prefetching in general, including Mozilla's prefetching infrastructure. It then classifies and reviews some prefetching techniques.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.7
• /
• pp.14-21
• /
• 2015

Distribution systems are operated in radial structure, but temporal loop structure could be founded the live load transfer. Main purposes of reconfiguration of distribution network are load balancing, loss minimization and voltage drop maintaining. In the loop structure, huge loop current can be flowed between two substations in case of large voltage angle difference. Protection devices of distribution line can be triped by this huge loop current. So, precise calculation of loop current is very important for secure switching. This paper proposes a novel calculation method of loop current using the voltage angle differences measured at the tie switches. Feasibility of the propose method has been verified by various case studies based on Matlab simulation.