• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2018

In drilling Inconel 601, which is used for compressor cases in aircraft engines, a lot of cutting oil must be supplied. This prevents tools from wear and fracture due to the heat buildup resulting from the high-temperature resistance and toughness of this alloy. However, the cutting oil supply has compromised the machining environment. This has caused attention to shift to an environmentally friendly cutting fluid supply system called the Minimum Quantity Lubrication(MQL) system. The aim of this study was to find a more efficient drill processing method using MQL and to verify its performance. To that end, the properties of Inconel that make it difficult -to -drill were studied by a comparison with the drilling of SM45C. Specific factors (i.e., cutting force and tool wear) were examined in relation to the conditions in the MQL-based drilling system. Based on these results, a sealed cover and step feed were proposed as measures to increase the effectiveness of the MQL system. The efficiency of the proposed method was established.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.378.2-378.2
• /
• 2014

We have investigated optical characteristics of $p-Ge_{0.99}Sn_{0.01}$ and Ge films grown on Si substrates using photoreflectance (PR) spectroscopy. The $Ge_{0.99}Sn_{0.01}$ and Ge films were grown by using an ultra-high vacuum chemical vapor deposition and molecular beam epitaxy methods, respectively. PR spectra were measured at 25 K and an extended InGaAs detector was used. By comparing $Ge_{0.99}Sn_{0.01}/Si$ and Ge/Si spectra, we observed the signals related to direct transition and split-off band of $Ge_{0.99}Sn_{0.01}$. The transition energies of $Ge_{0.99}Sn_{0.01}$ and Ge films were approximately 0.74 and 0.84 eV, respectively. Considering the shift of split-off band transition of $Ge_{0.99}Sn_{0.01}$, we suppose that the transition at 0.74 eV is attributed to direct transition between ${\Gamma}$ band and valence band. The temperature- and excitation power-dependent PR spectra were also measured.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.294-294
• /
• 2014

Developing magnetic thin films with desirable physical properties is a key step to promote research in spintronics. Organic-based magnetic material is a relatively new kind of materials which has magnetic properties in a molecular and microscopic level. These materials have been constructed by the coordination between 3d transition metal and organic materials producing long-range magnetic orders with a relatively high transition temperature. However, these materials were mostly synthesized as a form of powder, which is difficult to study for their physical properties as well as apply for electronic/spintronic devices. In this study, we have employed physical vapor deposition (PVD) to develop a new organic-based hybrid magnetic film that is achieved by the coordination of Fe and tetracyanoquinodimethane (TCNQ). The IR spectra of the grown film show modified CN vibration modes in TCNQ, which suggest a strong bonding between Fe and TCNQ. The thin film has both ferromagnetic and semiconducting behaviors, which is suitable for molecular spintronic applications. The high resolution photoemission (HRPES) spectra also show shift of 1s peak point of nitrogen and the carbon 1s peaks display traces of charge transfer from Fe to TCNQ as well as shake-up features, which suggest strong bonding and anti-bonding nature of coordination between Fe and TCNQ.

• Korean Membrane Journal
• /
• 제8권1호
• /
• pp.13-20
• /
• 2006

The production of CO-free hydrogen streams for feeding PEM-Fuel Cells using catalytic zeolite membrane reactors was analysed by means of selective oxidation. Tubular FAU (Na-Y) zeolite membranes, prepared by a secondary growth method and Pt-loaded, were used in a flow-through MR configuration. The catalytic tests were carried out at $200^{\circ}C$ and at different pressures with a simulated dry reformate shifted gas mixture ($H_2$ ca. 60%, CO 1 %, plus $O_2,\;N_2,\;CO_2$). The operative $O_2/CO$ stoichiometric equivalent feed ratio was ${\lambda}= 2$. These catalytic tests, reducing the CO concentration down to $10{\sim}50$ ppm, verified the possibility of MR integration after using a low temperature water-gas shift unit of a fuel processor to convert hydrocarbons into hydrogen-rich gas.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.515-519
• /
• 1999

We have investigated the photoreflectance characteristics for In\ulcornerGaAs/GaAs heterojunction structure grown by molecular beam epitaxy (MBE). The E\ulcorner bandgap energy of In\ulcornerGa\ulcornerAs at room temperature was observed at about 1.3 eV. From this result, the indium composition x value was calculated. The shoulder peaks were observed higher than E\ulcorner peaks, and peak positions were shifted toward 12 meV to 70 meV higher energy with increasing doping concentrations. The shoulder peaks can be observed by In segregation and re-evaporation. However, we think that indium re-evaporation cause th shift of shoulder peaks after epilayer growth.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.138-148
• /
• 1999

Thermal deformations of tension mask under localized heating are analyzed using finite element method and electron beam landing shifts are predicted by the analysis results. In CRT, electron beam landing shifts due to thermal deformations of the tension mask make the color purity of screen worse. In order to get the final results of thermal deformations, firstly the tension processes of the mask and following welding processes between the tensional mask and rail must be analyzed sequentially. And then, nonlinear transient thermo-elastic finite element analysis is performed on every part inside CRT including tension mask, wherein thermal radiation is a main heat transfer mechanism. Because the tension mask has numerous slits, the effective thermal conductivity and effective and effective elastic modulus is calculated, and the tension mask is modeled as a shell without slits. From the displacement results of tension mask, electron beam landing shifts is calculated directly. Experiments are performed to confirm our analysis results. Temperature distributions and beam landing shifts of tension mask are measured and the results are in good agreement with those of analyses.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권1호
• /
• pp.1-12
• /
• 2002

Ecophysiologically diapause represents a syndrome of physiological and biochemical characteristics, all of which ensure survival during a long period of dormancy. Since, silkworm enters diapause as embryo at the early embryonic stage, the duration of egg life depends on the duration of embryonic diapause. The nature of diapause in silkworm, Bombyx mori, is primarily determined by genetic characters and endocrinologicnl mechanisms, mediated by environmental factors such as temperature and photoperiod. Hibernating potency value besides nucleic acid and carbohydrate metabolism, production and utilization of sorbitol are also equally responsible for induction, initiation, determination, maintenance and termination of diapause. Embryonic diapause in Bombyx moir, induced by active secretion of sub-oesophageal ganglion is attributed to hormonal system and metabolic adjustment, which serves to bring about a new physiological state. Metabolic conversion of trehalose to glycogen at induction, glycogen to sorbitol at initiation and sorbitol to glycogen at termination of diapause is correlated and in each metabolic shift a key enzyme becomes active in response to hormonal and environmental stimulation. An attempt has been made in this review article to discuss briefly the nature of embryonic diapause, influence of various factors on diapause nature, hormonal mechanism of diapause besides biochemical composition of egg, nucleic acid and carbohydrate metabolism, production and utilization of sorbitol in relation to induction, determination, maintenance, initiation and termination of diapause in the silkworm, Bombyx mori.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.84.2-84.2
• /
• 2011

In this research, two thin film deposition techniques, Atomic Layer Deposition and Sputtering are carried out for the fabrication of Yittria Stabilized Zirconia electrolyte for thin film Solid Oxide Fuel Cell. Zirconium to Yittrium ratio for both cases is about 1/8. Scanning Electron Microscope(SEM) image shows that the growth rate per hour for Atomic Layer Deposition is faster than for sputtering. X-ray Photo-electron Spectroscopy(XPS) shows that the peaks of both Zirconia and Yittria shift towards higher bending energy for the case of Atomic Layer deposition and thus are more strongly attached to the substrate. Later, Nyquist plot was used to compare the conductivity of Yittria Stabilized Electrolyte for both cases. The conductivity at $300^{\circ}C$ for Atomic Layer Deposited Yittria Stabilized Zirconia is found to be $5{\times}10^{-4}S/cm$ while that for sputtered Yittria Stabilized Zirconia is $2{\times}10^{-5}S/cm$ at the same temperature. The reason for better performance for Atomic Layered YSZ is believed to be the Nano-structured layer fabrication that aids in along the plane conduction as compared to the columnarly structured Sputtered YSZ.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.239-245
• /
• 2007

DnaK is a major antigen in Streptococcus pneumoniae, and is induced by a minor shift in temperature (30 to $37^{\circ}C$) but not by ethanol shock. Although HrcA in the presence of $Ca^{{+}{+}}$ represses the expression of both groEL and hrcA, the control of transcription of the dnaK operon is not completely understood. In this study, the dnaK operon of S. pneumoniae (5' hrcA-grpE-dnaK-dnaJ) was cloned and analyzed. It contains large intergenic regions in grpE/dnaK and dnaK/dnaJ. Pulse labeling with [$^{35}S$]-methionine and immunoblot analyses revealed the presence of higher levels of DnaK than of HrcA even in the presence of $Ca^{{+}{+}}$ after heat shock suggesting that $Ca^{{+}{+}}$ differentially regulates the heat shock responses of hrcA and dnaK. By blocking de novo mRNA synthesis with rifampin it was shown that neither the hrcA nor the groEL transcripts were stabilized by heat shock even though dnaK transcripts were stabilized. We conclude that S. pneumoniae uses fine regulation of the transcription of the individual genes of the tetracistronic dnaK operon to cope with the various stresses experienced during infections.

• Journal of Pharmaceutical Investigation
• /
• 제28권2호
• /
• pp.109-113
• /
• 1998

This study is purposed to develop the sustained release and bioavailability of piracetam (PA). The use of alginate beads as a means to achieve sustained release of piracetam was evaluated in comparison with that of piracetam alone. In the PA-sodium alginate(SA) beads was confirmed by differential scanning calorimetry thermogram(DSC), indicating a relative shift of an endometric peak of PA to higher temperature. The changes in dissolution rates from PA-SA beads and PASA beads coated by chitosan(CHO) were significantly slower than that of intact PA. The release rate of PA-SA in the gastric fluid was markedly decreased compared with that in the intestinal fluid, suggesting that PA is mostly released in the intestinal fluid. However, the PA/SA ratio scarcely affected the release profile. The blood concentration- time curves of PA, PA-SA and PA-SA-CHO were obtained by oral administration to rats. $T_{max}$ of PA, PA-SA and PA-SA-CHO were 1, 10 and 6 hours, respectively. It was confirmed that the release of PA was prolonged by the formulation of PA-SA beads and PA-SA-CHO beads.