• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.851-856
• /
• 2015

This study aimed to develop a sensory feedback system which could measure force and temperature for the user of myoelectric prosthetic hands. The Sensory measurement module consisted of a force sensing resistor to measure forces and non-contact infrared temperature sensor. These sensors were attached on the fingertips of the myoelectric prosthetic hand. The module was validated by using standard weights corresponding to external force and a Peltier module. Sensory transmission module consisted of four vibration motors. Eight vibration patterns were generated by combining motion of each vibration motor and were dependent on kinds and/or magnitude. The module was verified by using standard weigts and water at varying temperatures. There were correlations of force and temperature between the sensory measurement module and standard weight and water. Additionally, exact vibration patterns were generated, indicating the efficacy of the sensory feedback system for the myoelectric prosthetic hand.

• Toxicological Research
• /
• 제11권1호
• /
• pp.37-42
• /
• 1995

Effect of cadmium on the early amphibian development was analyzed through FETAX (Frog Embryo Teratogenesis Assay: Xenopus). Embryos manifested concentration-dependent mortality and realformations; shortage of anterior-posterior axis gut realformation, ocular anomalies, bent notochord, misshapen dorsal fin, and derreal blisters. The treatment with 1.5ppm cadmium solution caused 100% mortality and concentration of lppm did not kill the embryos that caused 100% anomaly. The teratogenic index (TI = LC50 /EC50) was 2.8 indicating that $CdCl_2$ is teratogenic for Xenopus laevis. Embryos that were pulsetreated with at early to late blastula stage (St. 3-9) and mid to late blastula stage (St. 6-10) showed relatively strong resistance to cadmium, but the embryos treated at gastrula stage (St. 10-13) showed high mortality. And the embryos treated at tailbud stage (after St. 25) showed highest mortality of any other early stages. Effects of temperature were studied through pulse- treatment during gastrula stage at $20^{\circ}C$ and $30^{\circ}C$. The embryos treated with 7.5ppm at $30^{\circ}C$ and 15ppm at $20^{\circ}C$ caused 100% mortality respectively, indicating that higher temperature had more severe toxic effect. One of the most peculiar effect of cadmium at gastrulation was distortion of the tail. The probable cause of toxic effect of Cd was discussed.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.348-352
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• 한국분무공학회지
• /
• 제6권1호
• /
• pp.25-34
• /
• 2001

Several efforts to meet the exhaust gas regulation have been undertaken by many researchers in recent years. Main researches are on development of design techniques of intake port and combustion chamber, atomisation of fuel and precise control of air-fuel ratio, post-treatment of exhaust gas and so on. Engine technology is changed from PFI to GDI to correspond with exhaust gas regulation. GDI technique makes it possible to preserve lean air-fuel ratio and control accurate air-fuel ratio. Nevertheless, It is not cleared that information of spray characteristics and atomization process are very dependent on fluctuation of pressure and change of temperature in intake stroke. In this study, a constant volume combustion chamber is manufactured to investigate various fluctuations of in-cylinder pressure for injection duration. It is taken photographs of injection process of conventional GDI injector using PMAS. Then, it was verified experimently that ambient conditions as temperature and pressure of combustion chamber have effects on process of spray growth and atomization of fuel.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.538-546
• /
• 2008

In this paper, the constitutive equation is developed to analyze the characteristics of strain-induced plasticity in the range of low temperature of 316 stainless steel. The practical usefulness of the developed equations is evaluated by the comparison between experimental and numerical results. For 316 stainless steel, constitutive equations, which represent the characteristics of nonlinear material behavior under the cryogenic temperature environment, are developed using the Bodner's plasticity model. In order to predict the material behaviour such as damage accumulation, Bodner-Chan's damage model is implemented to the developed constitutive equations. Based on the developed constitutive equations, 3-D finite element analysis program is developed, and verified using experimental results.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1151-1158
• /
• 2013

습기 수착 물성은 전자 패키징 장치의 신뢰성에 있어서 층간의 수증기 압력에 의해 공정과정 동안 발생되는 박리 불량의 고장 분석 및 최적의 재료 개발에 있어서 필수적이다. 본 논문에서는 온습도 모델에 따른 전자 패키징 재료의 온도 의존적인 흡습 및 탈습 물성을 변수화 하였고 이에 대한 온도 및 습도의 영향에 대해 고찰하였다. 변수화된 확산성에서 얻어진 확산 활성화 에너지는 등가의 습기 수착 수준을 위한 가속 수명 비율을 결정하고 신뢰 수명 평가에 요구되는 등가의 소요 시험 시간에 미치는 습기 확산성의 영향을 예측할 수 있게 한다. 신뢰성 시험 표준에서 평가된 유연 전자 모듈의 가속 수명비율을 예시하였다.

• Journal of the korean society of oceanography
• /
• 제31권2호
• /
• pp.64-74
• /
• 1996

Numerical experiments of OAT (Ocean Acoustic Tomography) are carried out in the East Sea of Korea where the canonical ocean has been perturbed by a mesoscale warm eddy and a thermal front. In order to estimate the horizontal and vertical structure of water temperature of the perturbed ocean, the experimental area is divided into 16 cells with 8 pairs of sources and receivers for a horizontal slice and the water column is divided into 8 layers for a vertical slice. The inversely estimated temperature field by using SVD (Singular Value Decomposition) method reveals the eddy and frontal structure clearly. The rms errors of the two horizontal slices are less than $0.4^{\circ}C$ and $1.7^{\circ}C$ at 400 m and 200 m depths, respectively, while the error in the vertical slice is less than $1.0^{\circ}C.$ For better estimation of temperature by OAT method, particularly for the East Sea, a range-dependent ray model should be used to solve the forward problem. At the same time, improvement in computing the refracted ray path between vertical layers is required to obtain more accurate travel time information. The results of the present experiment give rise to a possibility of application of OAT in remote sensing of the ocean thermal structure.

• 한국광학회지
• /
• 제17권5호
• /
• pp.391-395
• /
• 2006

본 논문에서는 온도 제어가 가능한 blackbody를 이용하여 수동형 FTIR 분광계의 radiometric calibration을 수행하고 타당성을 살펴보았다. Radiometric calibration은 분광계로 입사되는 radiance의 온도 변화에 대한 광 검출기의 파장 별 응답특성과 기기 내부에서 발생되는 온도 및 반사율에 의해 발생되는 측정 오차를 보정하여 Planck radiance로 변환하는 기법이다. 시료에 대한 calibration 과정을 수행한 스펙트럼을 spectral library와 비교한 결과, 흡수 스펙트럼의 파장 별 선폭과 상대적인 intensity가 매우 유사하게 나타났으며 입사 광원의 온도차와 비례하여 spectral intensity가 일정하게 증가됨을 확인할 수 있었다.

• 한국수산과학회지
• /
• 제52권4호
• /
• pp.311-320
• /
• 2019

This study aimed to optimize mixing conditions (adding amount of squid skin and sea tangle Saccharina japonica) for concentrates of octopus Octopus vulgaris cooking effluent (COCE) and roasting conditions (temperature and time) of seasoned Laver Pyropia yezoensis with concentrates of octopus cooking effluent (SL-COCE) using response surface methodology (RSM). The results of RSM program for COCE showed that the optimum independent variables ($X_1$, squid skin amount; $X_2$, sea tangle amount) based on the dependent variables ($Y_1$, odor intensity; $Y_2$, amino-N content; $Y_3$, sensory overall acceptance) for high-quality COCE were 0.53% (w/w) for $X_1$ and 0.48% (w/w) for $X_2$ for uncoded values. The results of the RSM program for SL-COCE showed that the optimum independent variables ($X_1$, roasted temp.; $X_2$, roasted time) based on the dependent variables ($Y_1$, burnt odor intensity; $Y_2$, water activity; $Y_3$, sensory overall acceptance) for high-quality SL-COCE were $344^{\circ}C$ for $X_1$ and 8 sec for $X_2$ for uncoded values. The SL-COCE prepared under optimum procedure was superior in sensory overall acceptance to commercial seasoned laver.

• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.273-279
• /
• 1994

The stability of three oximes, Hl-6 [(4-carbamoyl-2'[(hydroxyimino)-methyl]- 1,1'-oxydimethylenedi-(pyridinium chloride)], Hl-CN [(4 cyano-2'-[(hydroxyimino)-methyl] -1,1'-oxydimethylene-di-(pyridinium chloride)], and 2-PAM [pralidoxime chloride] in aqueous solutions was evaluated by HPLC assay. The rate of degradation is dependent on the pH as well as the temperature at which the solution is stored. The optimum pH for the stability of these oximes was pH 2 to 3. The degradation rate constant for 2-PAM ($k\;at\;70^{\circ}C$, $2.07{\times}10^{-4}/hr;\;E_a\;value$, 27.2 kcal/mol) was smaller than those for bis-pyridiniumoximes, Hl-6 ($k\;at\;70^{\circ}C$, $3.38{\times}10^{-3}/hr$) and Hl-CN ($k\;at\;70^{\circ}C$, $8.66{\times}10^{-3}/hr;\;Ea\;value$, 20.7 kcal/mol). In mechanistic analyses, it was found that Hl-CN was decomposed through not only the hydrolysis of nitrile group but also the cleavage of methylene ether bridge, in contrast to Hl-6 which was degraded mainly through the cleavage of methylene ether bridge.