• 한국해양학회지
• /
• v.5 no.1
• /
• pp.14-29
• /
• 1970

Tidal variations of various chemical constituents in the laver bed sea waters in Wan Do Gun were determined over one spring tidal cycle from Oct. 1968 to Feb. 1969. Total ranges and means of the contents at Pyung-il Do and Wan Do are as follows. Although the average monthly variations of each content at Pyung-il Do were similar to those at Wan Do, most of the contents at Pyung-il Do were at a slightly higher level than at Wan Do. The values of silicate-silicon, phosphate- phosphorus and soluble iron, however, showed high levels at Wan Do. Chlorinity, magnesium, calcium, dissolved oxygen, silicate-silicon and phosphate-phosphorus contents increased from Oct. 1968 to Feb. 1969, though the content of soluble iron decreased before December and slightly increased in January and February. The average monthly variations of ammonia-nitrogen and nitrate-nitrogen contents were irregular. The nitrite-nitrogen content appeared in trace amounts in the months with a comparatively high water temperature, i.e., October and November, but in midwinter it was undetected. The ranges of the tidal variations of the contents of each chemical constituent were not significantly wide, though the contents varied excessively by the hour, and this may show the irregularity of the water quality in Wan Do Gun coastal area. As a rule, no regular tidal variation of the chlorinity was observed except slightly decreased value at ebb tide at Wan Do. In general, although the pattern of the variations of calcium and magnesium contents were similar to that of the chlorinity, no definite relationships between these constituents and chlorinity were observed. Tidal variations of the dissolved oxygen content, nutrient salts and soluble iron were irregular.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.229-234
• /
• 1999

We analyzed the reliability characteristics in platinum schottky diodes with variations of n-type silicon substrates concentrations and temperature variations of measurements. The parameters of reliability measurement analysis are saturation current. turn-on voltage and ideality factor in the forward bias, the breakdown voltage in the reverse bias with device shapes. The shape of devices are square type and long rectangular type for edge effect. As a result, we analyzed that the forward turn-on voltage, barrier height, dynamic resistance and reverse breakdown voltage were decreased but ideality factor and saturation current were increased by increased concentration in platinum and n-silicon junction parts. In measurement temperature(RT, $50^{\circ}C$, $75^{\circ}C$), the extracted electrical parameter values of reliability characteristics were increased at the higher temperature under the forward and reverse bias. The long rectangular type devices were more decreased than the square type in reverse breakdown voltage by tunneling effects of edge part.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2113-2116
• /
• 1997

The speed sensorless vector control of induction motor using the rotor speed and flux estimation is widely used. In practice, these schemes depend on the accurate parameters of the machine. If in the vector control scheme an inaccurate parameter of induction motor due to skin effects and to temperature variations is used. it is difficult to achieve correct field orientation. From this reason. we propose robust speed sensorless vector control of induction motor against the variations of parameter and disturbance by using extended Kalman filter. For speed and rotor flux estimation. conventional adaptive flux observer is applied. extended Kalman filter which is correctly capable of estimating rotor flux and load by eliminating virtually influences of structural noises is proposed. Simulation results show the effectiveness of the control strategy proposed here for the induction motor drives.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.3
• /
• pp.165-170
• /
• 2020

Muons and neutrons are representative secondary particles that are generated by interactions between primary cosmic ray particles (mostly protons) and the nuclei of atmospheric gas compounds. Previous studies reported that muons experience seasonal variations because of the meteorological effects of temperature. The intensity of neutrons has a typical modulation with various periods and reasons, such as diurnal and solar variation or transient events. This paper reports that cosmic ray particles, which were observed by neutron monitors, have seasonal variations using the daily data at the Oulu neutron monitor. To eliminate the effects of solar activity across time, the daily data were normalized by two different transformations: transformations with respect to the grand mean and yearly mean. The data after transformation with respect to the yearly mean showed more statistical stability and clear seasonal variations. On the other hand, it is difficult to determine if the seasonal variation results from terrestrial effects, such as meteorological factors, or extraterrestrial effects, such as the position of the Earth in its orbit of revolution.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.71-76
• /
• 2010

According to recent changes in industry for semiconductor devices, a low-temperature treatment has become a necessity. These changes relate to size refinement and the development of new materials. While variation in cooling efficiency does not affect the yield when using a high-temperature treatment, uniform cooling efficiency is necessary avoid "inconsistencies/bends" in low temperature treatments. However it is difficult to increase temperature stabilization in low temperature treatments. In this paper, using CFD (Computer Fluid Dynamics), we analyze and manipulate the design and input of the low-temperature system to attempt to control for temperature variations within the quartz tube, of which airflow appears to be a predominant factor. This simulation includes variable inputs such as airflow rate, head pressure, and design manipulations in the S.C.U. (Super Cooling Unit).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.284-292
• /
• 2012

Species composition and abundance of larval fishes in the coastal waters off Gori in the southeastern Korea were investigated from January to December in 2006. During the study period, 32 larvae species belonging to 20 families were collected. The dominant species were Engraulis japonicius, Hexagrammos agrammus, Sillago japonicus, Acropoma japonicum, Apogon lineatus, and Konosirus punctatus. These six species accounted for 87.0% of the total number of individuals collected. The number of species, number of individuals, and species diversity indices fluctuated by season. The peak numbers of species and individuals occurred in July and May, respectively. Correlation analysis showed that monthly variations in water temperature and salinity could act as an indicators of seasonal variations in the larval fish community structure and abundance of the dominant species; in particular, the abundance of S. japonicus, A. japonicum, and A. lineatus were significantly corrected with the water temperature.

• Ocean and Polar Research
• /
• v.33 no.spc3
• /
• pp.325-336
• /
• 2011

Seasonal to inter-annual variations of water properties in the western channel of the Korea Strait are investigated using quasi-monthly hydrographic observations collected during 2006-2010. Weak vertical temperature and salinity gradients are observed during the winter months and these remain until May. At the upper layer, temperature increases from March and reaches a maximum in August, while salinity decreases during the same period. Near-bottom water shows low temperatures during late winter and fall with a minimum peak in September. Korea Strait Bottom Cold Water produces thick layers (>20 m) in 2006 and 2010, while it is observed very near the bottom with relatively high temperature in 2008 and 2009.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.1
• /
• pp.43-50
• /
• 2000

In this study, experiments were carried out to measure the variations in the corrosion potential and current density of polarization curves using polycarbonate. The results were particularly examined to identify the influences affecting the corrosion potential including various conditions such as temperature, pH, catalytic enzyme, and salt. The lines representing the active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme, and salt. The tafel slope for the anodic dissolution was determined based on the polarization effect with various conditions. The slope of the polarization curves describing the active-to-passive transition region were noticeably shifted in direction. Also, from the variation in the conditions, the optimum conditions were established for the most rapid transformation, including temperature, pH, corrosion rate, and resistance of corrosion potential. The second anodic current density peak and maximum passive current density were designated as the critical corrosion sensitivity(Ir/If). The value of Ir/If was then used in measuring the extent of the critical corrosion sensitivity of the polycarbonate. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.520-529
• /
• 1998

Heat and mass transfer behaviors of metal hydride beds were predicted by solving a set of volume-averaged equations numerically both for the gas (hydrogen) and the solid(metal hydride) phases. Time variations of temperature and hydrogen concentration ratio distributions were obtained for internally cooled, cylindrical-shaped beds with metal(aluminum) fins imbedded in them. Also, time variations of the space-averaged hydrogen concentration ratio were obtained. Temperature and velocity of the coolant, hydrogen pressure at the gas inlet, and the fin spacing were taken as the parameters. The hydrogen absorption rate increases with the higher velocity and the lower temperature of the coolant, and with the decrease of the fin spacing. Increasing of the hydrogen pressure at the gas inlet also promotes the rate of absorption though the increasing rate gradually slows down. The amount of the hydrogen storage per unit volume of the bed decreases with the tighter fin spacing despite of the higher absorption rate ; therefore, there should be an optimum fin spacing for a given volume of the system and the amount of the hydrogen storage, in which the absorption rate is the highest.