• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.440-450
• /
• 2009

Metal(Zinc) soap and mixed metal(Zn/Ba) soap were synthesized with good structures and characterized by IR and H-NMR. The H-NMR spectrums of the synthesized soaps were in very good accordance with the structures proposed by earlier workers. The mixed metal soaps with various costabilizers(acid or metal content effect), which added in order to investigate the thermal stabilization effect at low and high temperature, were investigated the thermal stabilization effect. The temperature effect is relation to the metal content effect than acid effect. In case of mixed metal soap, the high thermal stabilization effect improved with increasing Barium content. As the Zinc content increase the low temperature thermal stabilization effect improved, but the high temperature thermal stabilization effect showed an opposite tendency.

• 센서학회지
• /
• 제24권6호
• /
• pp.412-418
• /
• 2015

In this paper, a new method for obtaining PID coefficients which are essential to a temperature stabilization process has been proposed. This method starts from measuring the open loop transfer function of the module, then the closed loop transfer function embodying PID control can be produced based on this. Finally, the simulations using a few PID coefficients and the performance analysis for those results provide the best PID coefficients which are effective in a fast setting to a target temperature, a less current needed, and less deviation from steady state. The measurement using the derived PID coefficients, $K_p=1.6$,$K_i=0.8$,$K_d=0.3$ showed $T_s=7.4[sec]$, %OS = 16, and stabilization within ${\pm}0.02[^{\circ}C]$ for several hours. In addition to light sources like SOA, the proposed method can be utilized for any device needs temperature stabilization.

• Carbon letters
• /
• 제9권4호
• /
• pp.308-315
• /
• 2008

In the present study, fast isothermal stabilization processes for rayon precursor fabrics were performed at $350^{\circ}C$ and $400^{\circ}C$ within 3 minutes and the chemical and physical characteristics of the stabilized fabrics were investigated. In addition, rayon precursor fabrics were pre-treated with three different phosphorous-based flame retardants and then stabilized. The effect of flame retardants on the chemical composition, thermal shrinkage, weight change, thermal stability and XRD results was examined, comparing with those of the precursor fabrics. The result showed that the stabilization of rayon fabrics was most effective as the stabilization temperature was $350^{\circ}C$, the stabilization time was 3 min, and the pre-treatment with phosphoric acid of 1 vol%. The carbon contents of stabilized rayon fabrics were increased with increasing stabilization temperature and time, whereas the oxygen contents were decreased. Also, it is likely that the pre-treatment with phosphoric acid plays a role in retarding the change of chemical structure of rayon fabric. The XRD result was quite consistent with the result showing the effect of phosphoric acid on the chemical composition, thermal shrinkage and weight reduction of rayon fabric.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.552-558
• /
• 2010

Zinc soap and Zn/Ba mixed metal soap were synthesized and PVC plastisol with mixed metal soap and various costabilizers were also synthesized with good structures and characterized by IR and $^1H$-NMR. The IR spectrums and $^1H$-NMR spectrums of the synthesized soaps were in very good accordance with the structures proposed by earlier workers. In using phosphite as a costabilizer, TIDP phosphite was shown to be the excellent thermal stabilization effect at the low temperature and TNPP phosphite was shown to be the excellent thermal stabilization effect at the high temperature. In case of antioxidant, it was revealed that antioxidant was not effective in the low temperature thermal stabilization effect while highly effective in the high temperature thermal stability. $NaClO_4$ solution with sorbitol solvent had the best thermal stabilization effect among $NaClO_4$ solution series at low and high temperature.

• 방사선산업학회지
• /
• 제5권1호
• /
• pp.41-46
• /
• 2011

Polyacrylonitrile (PAN) fibers are the most widely used precursor of the materials for carbon fibers. The conventional process of carbon fibers from PAN precursor fiber includes two step; stabilization at low temperature and carbonization at high temperature. Compared to thermal stabilization, the stabilization process by electron beam (E-beam) irradiation is a advanced and brief method. However, a stabilization by E-beam irradiation was required a high dose (over 5,000 kGy) and spend over 1.5 hr (1.14 MeV, 1 mA). In the present work the main goal is exploring a quick stabilization process by cotrolling E-beam currents. The effect of various E-beam currents on stabilization of PAN precursor fiber was studied by gel fraction test, thermo gravimertic analysis (TGA), differential scanning calorimetry (DSC), tensile strength, and scanning electron microscopy (SEM) images.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1372-1377
• /
• 2003

The stabilization of propane/air lean premixed flames by a heated cylindrical rod is investigated experimentally. The flame stability limits, heat flux, surface temperatures, equivalence ratios, and mixture velocities are measured in order to understand the role of heat flux or surface temperature on the flame stabilization of lean premixed flames. The flame stability limits are lowered by a heated cylindrical rod and extended even below the flammability limit of propane/air mixture when sufficient heat flux is provided. The flame stability limit decreases with the increase of heat flux or surface temperature and decreases with the higher mixture velocity. The diameter of cylindrical rod, however, dose not significantly affect the flame stability limit. The laminar flame speed has been measured for ultra lean propane/air premixed flames. The flame stabilization by a heated cylindrical rod provides the useful tool for the measurement of flame speed under very fuel-lean conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.715-716
• /
• 2011

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.119-121
• /
• 2014

In general, high temperature combustion technique has been adopted as an efficient one. However, hydrocarbon-based fuel can be decomposed under high temperature, and it can affect the stabilization mechanism of edge flame. In this research, basic experimental study was conducted to identify the effect of fuel pyrolysis on the lift-off flame stabilization by changing the temperature of the plug flow reactor. Schmidt number of the gas fuel can be changed with temperature variation due to the fuel pyrolysis. Eventually, this study will help to establish and clarify the stabilization mechanism of lift-off edge flame.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.485-490
• /
• 2004

Sawtooth mixing device used in a non-premixed burner is evaluated for flame stabilization and NO$_{x}$ reduction. Three mixers with different blade angles are tested. Methane is delivered through the fuel jet and air passes through the co-flow annulus. The flame mode changes (attached flame, lifted flame and extinction) against the fuel flow speed are measured, and the stability diagram is drawn. Moreover, by traversing thermocouple and sampling probe in the flame, the distribution of temperature and NO$_{x}$ mole fraction are measured. With the change in blade angle, flame shape, flame stabilization, the distribution of temperature and NO$_{x}$ mole fraction are changed considerably.rably.

• 접착 및 계면
• /
• 제14권1호
• /
• pp.21-27
• /
• 2013

셀룰로오스계 레이온섬유 또는 레이온직물은 좁은 온도범위의 안정화공정 동안에 열분해가 매우 빠르게 진행된다. 그러므로 레이온계 탄소섬유를 제조하는데 있어 안정화단계는 매우 중요한 핵심공정이다. 따라서 본 연구에서는 셀룰로오스계 레이온직물의 중량감소, 화학조성, 미세구조 및 texture 변화에 미치는 등온 안정화공정과 초음파세척의 영향을 조사하였다. $200{\sim}240^{\circ}C$ 영역에서 행한 등온 안정화공정의 온도는 레이온직물을 안정화 소요시간, 탄소함량, 산소함량, 셀룰로오스 구조 변화 그리고 직물 texture에 큰 영향을 주었다. 등온 안정화공정 전에 물을 이용한 초음파세척은 레이온직물의 안정화공정 시간을 단축하고, 안정화 후 직물의 탄소함량을 증가하고, 산소함량을 감소시키며, XRD 분석 패턴을 변화시키는데 역할을 하는 것으로 조사되었다. 또한 초음파세척은 등온 안정화공정시 발생하는 레이온직물의 빠른 중량감소 현상을 더디게 하고, 열수축을 감소시켜, 직물의 급격한 물리적 변화의 완화에도 기여하는 것으로 사료된다.