• Title/Summary/Keyword: temperature mapping

Search Result 233, Processing Time 0.028 seconds

$Ba(Zr_{0.85}Y_{0.15})O_{3-\delta}$-NI Composite Membrane for Hydrogen Separation by Aerosol Deposition Method (에어로졸 증착법(Aerosol Depostion method)에 의한 $Ba(Zr_{0.85}Y_{0.15})O_{3-\delta}$-NI 수소분리막 제조)

  • Park, Young-Soo;Choi, Jin-Sub;Byoun, Myoung-Sub;Kim, Jin-Ho;Hwang, Kwang-Taek
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.21 no.4
    • /
    • pp.271-277
    • /
    • 2010
  • $(Ba(Zr_{0.85}Y_{0.15})O_{3-\delta})$ oxide, showing high protonic conductivity at high temperatures and good chemical stability with $CO_2$ are referred to as hydrogen separation membrane. For high efficiency of hydrogen separation ($H_2$ flux and selectivity) and low fabrication cost, ultimate thin and dense BZY-Ni layer has to be coated on a porous substrate such as $ZrO_2$. Aerosol depostion (AD) process is a novel technique to grow ceramic film with high density and nano-crystal structure at room-temperature, and may be applicable to the fabrication process of AD integration ceramic layer effectively. XRD, SEM, X-ray mapping measurements were conducted in order to analyze the characteristics of BZY-Ni membrane fabricated by AD process. it is observed that it is homogeneous distribution for BZY-Ni. The result of $H_2$ permeation rate suggests that BZY-Ni composite is higher than BZY.

Forest Canopy Density Estimation Using Airborne Hyperspectral Data

  • Kwon, Tae-Hyub;Lee, Woo-Kyun;Kwak, Doo-Ahn;Park, Tae-Jin;Lee, Jong-Yoel;Hong, Suk-Young;Guishan, Cui;Kim, So-Ra
    • Korean Journal of Remote Sensing
    • /
    • v.28 no.3
    • /
    • pp.297-305
    • /
    • 2012
  • This study was performed to estimate forest canopy density (FCD) using airborne hyperspectral data acquired in the Independence Hall of Korea in central Korea. The airborne hyperspectral data were obtained with 36 narrow spectrum ranges of visible (Red, Green, and Blue) and near infrared spectrum (NIR) scope. The FCD mapping model developed by the International Tropical Timber Organization (ITTO) uses vegetation index (VI), bare soil index (BI), shadow index (SI), and temperature index (TI) for estimating FCD. Vegetation density (VD) was calculated through the integration of VI and BI, and scaled shadow index (SSI) was extracted from SI after the detection of black soil by TI. Finally, the FCD was estimated with VD and SSI. For the estimation of FCD in this study, VI and SI were extracted from hyperspectral data. But BI and TI were not available from hyperspectral data. Hyperspectral data makes the numerous combination of each band for calculating VI and SI. Therefore, the principal component analysis (PCA) was performed to find which band combinations are explanatory. This study showed that forest canopy density can be efficiently estimated with the help of airborne hyperspectral data. Our result showed that most forest area had 60 ~ 80% canopy density. On the other hand, there was little area of 10 ~ 20% canopy density forest.

Phase Transformation and Mechanical Properties of 14 K White Gold Alloys by Heat Treatments

  • Yun, Don-Gyu;Seo, Jin-Gyo;An, Yong-Gil;Sin, So-Ra;Han, Dong-Seok;Park, Jong-Wan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.283-283
    • /
    • 2013
  • Because of beautiful glossy and color, the value of gold leverage is very high in Europe. To improve the quality of gold alloys, we performed heat treatment on 14 K white gold alloys by variously changing age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14 K white gold alloy. For solid solution treatment [ST], casted gold alloy specimens were treated at high temperature ($750^{\circ}C$) for 30 minutes, and the specimens dropped to water to quench them. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250{\sim}300^{\circ}C$). After the heat treatment, we observed the phenomenon to increase hardness from 126 Hv to 166 Hv by Vicker's hardness tester. Through electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. In the SEM and OM images, two phases of matrix and particle-likestructures were observed, and the precipitation of these elements from the matrix progressed during age-hardening. By transmission electron microscope and X-ray diffraction observation, it was revealed that the formation of the Au3Cu superstructure contributed to the age-hardening at $270^{\circ}C$ in the gold alloy. After the heat treatment, this analysis shows that casted gold alloys were to improve hardness and to moderate surface defects at specific temperatures and duration.

  • PDF

Purification and Characterization of Chitinase from a New Species Strain, Pseudomonas sp. TKU008

  • Wang, San-Lang;Lin, Bo-Shyun;Liang, Tzu-Wen;Wang, Chuan-Lu;Wu, Pei-Chen;Liu, Je-Ruei
    • Journal of Microbiology and Biotechnology
    • /
    • v.20 no.6
    • /
    • pp.1001-1005
    • /
    • 2010
  • The chitinase-producing strain TKU008 was isolated from soil in Taiwan, and it was identified as a new species of Pseudomonas. The culture condition suitable for production of chitinase was found to be shaking at $30^{\circ}C$ for 4 days in 100 ml of medium containing 1% shrimp and crab shell powder, 0.1% $K_2HPO_4$, and 0.05% $MgSO_4{\cdot}7H_2O$ (pH 7). The TKU008 chitinase was suppressed by the simultaneously existing protease, which also showed the maximum activity at the fourth day of incubation. The molecular mass of the chitinase was estimated to be 40 kDa by SDS-PAGE. The optimum pH, optimum temperature, pH stability, and thermal stability of the chitinase were pH 7, $50^{\circ}C$, pH 6-7, and <$50^{\circ}C$, respectively. The chitinase was completely inhibited by $Mn^{2+}$ and $Cu^{2+}$. The results of peptide mass mapping showed that 11 tryptic peptides of the chitinase were identical to the chitinase CW from Bacillus cereus (GenBank Accession No. gi 45827175) with a 32% sequence coverage.

Drought Hazard Assessment using MODIS-based Evaporative Stress Index (ESI) and ROC Analysis (MODIS 위성영상 기반 ESI와 ROC 분석을 이용한 가뭄위험평가)

  • Yoon, Dong-Hyun;Nam, Won-Ho;Lee, Hee-Jin;Hong, Eun-Mi;Kim, Taegon
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.62 no.3
    • /
    • pp.51-61
    • /
    • 2020
  • Drought events are not clear when those start and end compared with other natural disasters. Because drought events have different timing and severity of damage depending on the region, various studies are being conducted using satellite images to identify regional drought occurrence differences. In this study, we investigated the applicability of drought assessment using the Evaporative Stress Index (ESI) based on Moderate Resolution Imaging Spectroradiometer (MODIS) satellite images. The ESI is an indicator of agricultural drought that describes anomalies in actual and reference evapotranspiration (ET) ratios that are retrieved using remotely sensed inputs of Land Surface Temperature (LST) and Leaf Area Index (LAI). However, these approaches have a limited spatial resolution when mapping detailed vegetation stress caused by drought, and drought hazard in the actual crop cultivation areas due to the small crop cultivation in South Korea. For these reasons, the development of a drought index that provides detailed higher resolution ESI, a 500 m resolution image is essential to improve the country's drought monitoring capabilities. The newly calculated ESI was verified through the existing 5 km resolution ESI and historical records for drought impacts. This study evaluates the performance of the recently developed 500 m resolution ESI for severe and extreme drought events that occurred in South Korea in 2001, 2009, 2014, and 2017. As a result, the two ES Is showed high correlation and tendency using Receiver Operating Characteristics (ROC) analysis. In addition, it will provide the necessary information on the spatial resolution to evaluate regional drought hazard assessment and and the small-scale cultivation area across South Korea.

Physicochemical Properties and the Origin of Summer Bottom Cold Waters in the Korea Strait (하계 대한해협 저층냉수의 물리.화학적인 특성 및 기원)

  • Kim, Il-Nam;Lee, Tong-Sup
    • Ocean and Polar Research
    • /
    • v.26 no.4
    • /
    • pp.595-606
    • /
    • 2004
  • Hydrographic survey in the Korea Strait has long history that has begun in August 1917 at the Busan - Tsushima cross section, still continues to date. However, chemical properties of bottom cold water found exclusively in the western channel of the Korea Strait during summer did not receive much scientific attention. The aim of the study is to decipher the enigmatic origin of the Korea Strait Bottom Cold Water (KSBCW) in terms of chemical properties. The physicochemical properties of the KSBCW are extracted from the CREAHS II hydrographic data. OMP method was applied to analyze origin of the KSBCW quantitatively. The KSBCW is well defined by low temperature below $10^{\circ}C$. The cold waters exhibited the local presence near the coast at about 120m depth with a thickness of 20m to 30m. The cold water was characterized by relatively cold, saline and higher chemical concentrations than adjacent waters. The KSBCW seems to have different origin kom that of the coastal upwelled waters at the Ulgi-Gampo because it is saline, denser and contains considerably less dissolved oxygen than upwelled waters. The physicochemical properties are reported to have noticeable annual variations which suggest the complex origin of the KSBCW. OMP analysis show that the KSBCW is a mixture of three water types; TMW (24%), ESIW (36%) and ESPW (40%). Relationship between the KSBCW and the east Sea circulation is traced by mapping the water masses that have similar T, S and DO of KSBCW. The result showed that the KSBCW is most possibly an extension of southward flowing coastal intermediate waters. Front these results, we expect that the monitoring KSBCW will provide us valuable information about the East Sea circulation.

12 CO, 13CO, AND C18 OBSERVATIONS TOWARD OMC-1 (OMC-1의 12 CO, 13CO, C18O의 관측)

  • 천문석;송혜정;손영종
    • Journal of Astronomy and Space Sciences
    • /
    • v.19 no.1
    • /
    • pp.7-18
    • /
    • 2002
  • Interstellar cabon monoxide and its isotopes were observed with the 13.7m radio telescope of the Daeduk Radio Astronomy Observatory toward Orion Molecular Cloud-1 (OMC-1). We derive the excitation temperature, optical depth, column density, and isotopic abundance ratios from the observed lines of $^{12}CO,^{13}CO,\;and\;C^{18}O$ inside of the region of $11'{\times}11'$. The optical depths of $^{13}CO$ were obtained to be 0.1~0.4, while those of $C^{18}O$ to be 0.01~0.03. The isotopic ratios $^{12}C/^{13}C$ were also estimated to be 2~60. We could not find the radial isotopic ratio $^{12}C/^{13}C$ gradient in the OMC-1.

Survey for CO Outflow Activities in 68 VeLLOs

  • Kim, Gwanjeong;Lee, Chang Won;Kim, Mi-Ryang;Soam, Archana;Kazuhiro, Kiyokane;Saito, Masao
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.41 no.2
    • /
    • pp.47.1-47.1
    • /
    • 2016
  • We present a preliminary result of search for CO molecular outflows toward a sample of 68 candidate Very Low Luminosity Objects (VeLLOs; Lint ${\leq}0.1L_{\odot}$) to help to understand their physical properties. The sources have been identified using the data at IR to radio wavelengths by M. Kim et al. 2016 toward nearby star-forming regions in the Gould belt. These sources were observed in rotational transitions 2-1 and 3-2 of $^{12}CO$, $^{13}CO$, and $C^{18}O$ molecules with SRAO, CSO, JCMT, and ASTE telescopes. In the beginning of our survey we made a single pointing observation in $^{12}CO$ 2-1 or 3-2 lines for our sample, identifying 53 sources as potential outflow candidates from their line wing features. We made full or partial mapping observations for these candidates with the same lines, finding 33 sources with bipolar or one-sided outflow features. Out of these 33 sources, 6 VeLLOs are previously known sources to have their outflows and 27 VeLLOs are found to be new outflow sources identified from this study. We estimated outflow properties with corrections for excitation temperature, optical depth, and inclination. Their outflow forces range from $8.7{\times}10^{-10}$ to $6.0{\times}10^{-5}M_{\odot}\;km\;s^{-1}yr^{-1}$ with a median value of $3.6{\times}10^{-7}M_{\odot}\;km\;s^{-1}yr^{-1}$, indicating that most of the VeLLOs are less powerful than those for protostars. Their accretion luminosities vary from $9.7{\times}10^{-9}$ to $166L_{\odot}$ with a median value of $0.004L_{\odot}$, implying that most VeLLOs have larger ratios of the accretion luminosity to the internal luminosity but a significant number of VeLLOs have smaller ratios. This result suggests that many of the VeLLOs can be explained with episodic accretion but a significant number of VeLLOs cannot.

  • PDF

A Study on Urban Environmental Climate Mapping Method for Sustainable Urban Planning in Daegu (대구지역의 환경친화적 도시계획을 위한 도시환경기후지도 작성에 관한 연구)

  • Park, Myung-Hee;Jung, Woo-Sik;Kim, Hae-Dong
    • Journal of Environmental Science International
    • /
    • v.20 no.4
    • /
    • pp.465-482
    • /
    • 2011
  • To preserve atmospheric environment of urban areas, it needs to create urban space considering air pollution sources and natural and geographical properties such as wind circulation. According to this study could examine climate and environmental characteristics of Daegu and accordingly suggest a climate map in urban environment and an "advice map" in urban planning. The urban area(area paved with asphalt and concrete) of Daegu has increased by more than five times since 1960. In addition, the analysis of thermal environment through satellite data shows that the surface temperature between a place paved with artificial structures and a farmland shows $10{\sim}20^{\circ}C$ difference during the daytime in the summer. Regarding the parks inhibiting the heat island of a city have the small area of trees, and the road paved with concrete is wide so that they hardly serve as the source of heat absorption. As Apsan is located to the south of Daegu and Palgonsan to the north and Daegu has east high west low type, mountain wind from mountains in the south and north passes a city and delivers heat and air pollutions at night. In the west of Daegue, there is the poorest environment and industrial facilities and environmental basic facilities are mostly located, so large residential complexes that are being built around the industrial facilities as if they set up a folding screen and therefore the poor environment is increasingly worse.

Quantitative Analysis on Near Band Edge Images in GaAs Wafer (GaAs 웨이퍼의 대역단 영상에 대한 정량적 해석)

  • Kang, Seong-jun;Na, Cheolhun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.5
    • /
    • pp.861-868
    • /
    • 2017
  • Near band infrared imaging technique has adopted for imaging EL2 and shallow level distributions in undoped semi-insulating LEC GaAs. This technique, which relies on the mapping of near bandgap infrared transmission, is both rapid and non-destructive. Until now no quantitative analysis has been reported for near band edge region which gives the reverse contrast on EL2 absorption images. This paper presents the spectral, spatial and temperature dependence of photoquenching forward and inverse mechanism in the band edge domain for cells and walls and for direct and inverted contrast conditions during transitory regimes. The difference in the threshold for the EL2w and EL2b defects could be attributed to the contribution of a different electrical assistance due to a different species of impurities. Quantitative analysis results show an increased density of EL2w and a small reduction of EL2b in the region of the walls where there is a high density of dislocations.