• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.415-423
• /
• 2006

Interannual variation and long-term trends of coastal sea surface temperature (SST) in Korea were investigated by analyzing 27 coastal SST time series from 1969 to 2004. Long-term linear increasing trend was remarkable with the rate over $0.02^{\circ}C/year$ at almost all the stations. The slope of long-term linear trend was larger at the stations along the eastern coast than in the western and southern regions. It was also noticeable that there was a common tendency of interannual variability with the period of 3-5 years at most of the stations. SST was lower in the 1970's and early 1980's while it was higher in the 1990's and early 2000's after the increase in the late 1980's. The pattern of the interannual variability of SST was similar to that of air temperature. Increasing trend of minimum SST in winter was obvious at most stations na it was larger along the eastern coast, while the linear trend of maximum SST in summer was less definite. Therefore, the decreasing tendency of annual amplitude was mainly due to the increasing tendency of SST in winter.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.170-178
• /
• 1987

Changes of the properties of PECVD-SiN film with the variation of deposition process parameters were investigated and optimum process parameters were determined. The refractive index of the film increased with increasing substrate temperature and pressure, and decreasing rf-power, NH3/SiH4 gas ratio and total gas flow. BHF etch rate and deposition rate show a decreasing tendency with increasing refractive index. The step coverage of the film was not affected much by deposition rate and pressure, but improved apparently with increasing rf-power and NH3/SiH4 gas ratio. Also the optimum process parameters were determined by considering the characteristic properties as well as thickness uniformity of films. The refractive index of the film deposited under this condition was 2.06.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.764-767
• /
• 2004

This study was to measure the minuteness structure, dielectric properties of (0.3-x)PMN - XPSS-0.7PZT+0.5wt%NiO+0.5wt%$MnO_2$(x=0.05, 0.10, 0.15, 0.20, 0.25)ceramics according to sintering temperature and PSS moi percentage after manufacturing the specimens with a general method. the results of this study were gotten such as follows. The crystal structure of ceramic has the rombohedral structure in XRD. it appeared that addition of Ni, Mn additive was helpful to the formation of stable structure. Dielectric constant at $20^{\circ}C$ showed its maximum value 890.001 in specimens sintered at $1000^{\circ}C$, x=0.15mol. and dielectric loss showed its minimum value 6.95[%] in specimens sintered at $1000^{\circ}$, x=0.05mol. The variation rate of dielectric constant according to the change of frequency was decreased by increasing frequency, The variation rate of dielectric constant according to the change of temperature was increased by increasing temperature.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.218-224
• /
• 2001

Yttria-stabilized zirconia (YSZ) films were deposited with varying temperatures of ZrCl$_4$between 250~55$0^{\circ}C$ with YCl$_3$and the substrate at 100$0^{\circ}C$. Nanoamperes per square centimeter of the electric current were measured in the reactor during deposition and the current increased with increasing evaporation temperature of ZrCl$_4$. The zirconia nanometer size clusters were captured on the grid membrane near the substrate during the CVD process and observed by transmission electron microscopy (TEM). The deposition rate decreased with increasing evaporation temperature of ZrCl$_4$. A cauliflower-shaped structure was developed at 25$0^{\circ}C$ then gradually changed to a faceted-grain structure above 35$0^{\circ}C$. Dependence of the growth rate and the morphological evolution on the evaporation temperature of ZrCl$_4$was approached by the charged cluster model.

• 한국진공학회지
• /
• 제16권4호
• /
• pp.298-304
• /
• 2007

rf 플라즈마 소스가 장착된 분자선 에피택시 장비를 이용하여 Si(111) 기판위에 GaN 나노로드를 성장할 때, N2의 흐름양을 조절하여 나노로드의 구조 및 광학적인 특성을 조사하였다. $N_2$의 양이 1.1sccm에서 2.0sccm으로 변할 때 육각형 모양의 나노로드가 성장되었으며, 평균 직경이 80nm에서 190nm 까지 변화 하였다. 그러나 나노로드와 compact한 영역의 길이 (두께)비는 $N_2$의 양이 1.7sccm 까지는 증가하지만 그 이상에서는 변화지 않았다. PL 측정으로부터, $N_2$의 양이 적은 나노로드에서 자유 엑시톤의 피이크가 더욱 뚜렷하게 관측되었고, 모든 PL 피이크의 위치는 직경이 적을수록 나노로드의 크기 효과에 의해서 고에너지 쪽으로 이동하였다. $N_2$의 양이 1.7sccm 인 시료에서는 온도에 따른 PL의 피이크의 위치가 온도가 증가함에 따라서 "S-형"의 거동을 나타내었다.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.155-160
• /
• 2003

The effect of the temperature, current density and deposit time on hard chromium deposition in trivalent chromium bath was investigated. Cathode current efficiency increased with increasing current density. Increasing bath temperature from $20^{\circ}C$ to $50^{\circ}C$, chromium deposits were produced in higher current density and the maximum current efficiency was increased. At the plating conditions of $40^{\circ}C$, $30A/dm\m^2$, the deposition thickness increased in proportion to increasing electrolysis time The rate is$ 90\mu\textrm{m}$/hrs. for 2 hours. Microhardness of chromium deposits increased with increasing bath temperature and decreasing current density, and it was constant with electrolysis time. All of bath conditions, microstructure of chromium deposits has nodular structure with some cracking pattern and nodule size increased with increasing deposit thickness.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.328-334
• /
• 2002

Nylon 6 staple ultramicrofiber(UMF, 0.074) and regular staple fiber (Regular, 2.0d) were annealed at In, 130, 160 and $180^\circ{C}$ under tension free for 10 min and U min. The treated fibers were dyed with Acid Red 18 and Blue n3. They were adjusted at PH 5.0 of dye bath in buffer solution of $CH_3COOH/CH_3/COONa(0.1mo1/1)$. Liquor ratio was kept at 1000:1. Dyeing rate of UMF annealed at $100^\circ{C}$ was decreased, but was increased for regular nylon. Also dye equilibrium of UMF at $100^\circ{C}$ was increased for Acid Red 18, but was decreased for Acid Blue 83. The intensities of X-ray diffraction peaks of UMF increased with increasing annealing temperature. Also the crystallinity of heat-sotted fibers by DSC thermogram was well agreed with the tendency of density Amino end group, moisture regain and water absorbency were decreased with increasing annealing temperature.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2348-2352
• /
• 2017

The electrical contact characteristics including temperature rise, contact resistance and arc erosion rate of the $Ag-SnO_2$ materials with increased $SnO_2$ content were investigated during the repeated make-and-break operations. The thickness of arcing melting layer reduces by half and the arc erosion rate decreases more than 70% under 10000 times operations at AC 10 A with the $SnO_2$ content increasing from 15 wt.% to 45 wt.%, on one hand, temperature rise and contact resistance increase obviously but could be reduced to the same order of conventional $Ag-SnO_2$ materials by increasing the contact force. The microstructure evolution and the effect of $SnO_2$ on the arc erosion, contact resistance were analyzed.

• 환경위생공학
• /
• 제11권2호
• /
• pp.65-73
• /
• 1996

The objective of this study is to investigate the removal efficiency of volitile organic compounds in soil, and the mechanism of desorption by bench scale microwave heating, Silt soil used for experiment and was impregnated with toluene, tetrachloroethylene, o-xylene and p-dichlorobenzene and the microwave treatment was conducted in a modified domestic microwave oven : 2450MHz, 700W. According to the results of the research the removal efficiency was improved with increasing water contents and the soil temperature appeared to plateau period extending to 2-3minutes corresponds to the temperature a which steam distillation was expected. The value of removal rate constant (k) were calculated on dry and moisty silt soil, respectively, which showed linear with increasing microwave heating time. Therefore, addition of a certain amount of water to the contaminated soil can efficiently enhance the ability of the soil to absorb microwave energy and promote the evaporation of the volitile contaminants.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.91-96
• /
• 2004

Wear behavior of self-mated stainless steels in NaCl solution has been investigated. The experiment was done in the corrosive liquid of which NaCl concentration of $0\~3\%$ and temperature of $15\~90^{\circ}C$. Two kinds of wear type were observed: one is 'severe wear' type which shows gradually increasing wear volume with increasing sliding distances, the other is 'mild wear' type which shows change of wear rate from high value to low at transition distance. The specific wear rate in severe wear type was not sensitive to the liquid temperature and concentration of NaCl but stable at value of $1\times10^{-3}\;mm^3$ approximately.