• 한국환경과학회지
• /
• 제26권10호
• /
• pp.1125-1133
• /
• 2017

In this study a method for filling in missing data of river water temperature using a pre-constructed mathematical relationship between air and water temperatures is presented. A regression between water temperatures at individual stations and ambient air temperatures at nearby weather stations can provide a practical method for representing missing water temperature data for an entire region. Air and water temperature data that were collected from two test sites (one coastal and, one inland) were individually fitted to a nonlinear regression model. To consider seasonal hysteresis effects, separate functions were fitted to the data in the rising and falling limbs. A single-criterion, multi-parameter optimization technique was used to determine the optimal parameter sets. This method minimizes the differences between the time series of the measured and estimated data. The constructed air-water temperature relationship was subsequently applied to represent missing water temperature data. It was found that the RMSEs(MBEs) were in the range of $1.843-1.976^{\circ}C(-0.329-0.201^{\circ}C)$ and the coefficient of determination were in the range of 0.92-0.96. The results demonstrate that the predicted water temperatures using the regression equations were reasonably accurate.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.17-22
• /
• 2003

본 연구에서는 나노기술을 이용하여 에너지 감쇠 기능을 활용한 감쇠기 개발에 대한 연구를 하였다. 유체 감쇠기를 대체하는 완충역할을 하는 미로구조를 가지는 실리카 겔 입자를 사용하였으며, 입자에 관련한 작동 유체로는 물을 사용하여 그 효과를 검증하였다. 콜로이드 감쇠기를 구현하기 인해서는 형성된 실리카 겔 입자의 표면을 유기 실리콘 매질을 이용한 소수화 코팅 처리를 하였다. 정적 하중 상태에서의 가역적 콜로이드 감쇠기에 대한 실험을 수행하였다. 콜로이드 감쇠기내 다공질 입자의 나노 유로(pore)와 다공성 입자의 직경, 다공성 입자의 구조, 그리고 대기압 상태에서 유체의 출입을 통제하기 위한 코팅처리의 분자 간 길이와 같이 여러 가지 요인의 콜로이드 감쇠기 이력현상에 대한 영향을 평가하였다. 감쇠기의 소산 에너지양과 효율에 대해서도 조사하여 유압 감쇠기 보다 뛰어난 결과를 얻었으며 콜로이드 감쇠기로 사용 가능하다는 사실을 입증하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.95.1-95.1
• /
• 2007

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.539-547
• /
• 2015

To investigate dimensional responses of wood under dynamic temperature condition, poplar (populous euramericana Cv.) specimens, 20 mm in radial (R) and tangential (T) directions with two thicknesses of 4 and 10 mm along the grain, were exposed to cyclic temperature changes in square wave between $25^{\circ}C$ and $40^{\circ}C$ at 60% relative humidity (RH) for three different cycling periods of 6 h, 12 h and 24 h. R and T dimensional changes measured during the cycling gave the following results: 1) Transverse dimensional changes of the specimens were generally square but at an opposite phase and lagged behind the imposed temperature changes. The phase lag was inversely correlated with cycling period, but positively related to specimen thickness, while the response amplitude was directly proportional to cycling period, but in a negative correlation with specimen thickness. 2) The specimens showed swelling hysteresis behavior. The heat shrinkage coefficient (HSC) became greater as cycling period increased or specimen thickness decreased. 3) Dimensional changes of the specimens produced deformation accumulation during repeated adsorption and desorption. The deformation accumulating ratio decreased with an increase in cycling period and specimen thickness. 4) Wood suffered 1.5 times as many dimensional changes per unit temperature variation as per unit humidity variation, and this deformation behaved even more seriously under static condition.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.156-161
• /
• 2008

The fabrication of vanadium oxide films directly on Si(100) substrates by plasma atomic layer deposition(ALD) with vanadium oxytriisopropoxide(VOIP) and oxygen as the reactants have been performed at temperature ranging from 250 to $450^{\circ}C$. Growth rate of vanadium oxide was $2.8{\AA}$/cycle at $300{\sim}400^{\circ}C$ defined as ALD acceptable temperature window, Vanadium oxide has been shown the different phases at $250^{\circ}C$ and more than $300^{\circ}C$. It has been confirmed that the phase of the films deposited at $250^{\circ}C\;was\;V_2O_5$ type and that of the films above $300^{\circ}C\;was\;VO_2(T)$ type measured at room temperature, respectively. A large change in resistance and small temperature hysteresis corresponding to a temperature has been observed in the vanadium oxide film deposited at temperature $350^{\circ}C$.

• 한국연초학회지
• /
• 제3권1호
• /
• pp.30-40
• /
• 1981

The moisture sorption and desorption isotherms of various tobaccos were obtained over a relative humidity range from 0 to 90% at $20^{\circ}C$ and $30^{\circ}C$. The hysteresis effect, constant and rate of moisture sorption and desorption, monomolecular-layer moisture content, and specific surface area were analyzed from the obtained data. The moisture sorption and desorption isotherms showed a different characteristics for different tobacco varieties. At a lower humidity range below 50% RH, Burley tobacco had higher moisture sorption and desorption figures than Hicks and Basma, while, at a higher humidity range above 50% RH, Hicks had higher values than the others. The hysteresis effect of tobacco were greater in an intermediate humidity range (40-70% RN), and Basma showed a greater effect than the others. The sorption and desorption constant (K) increased with temperature, but decreased with RH, and Burley tobacco had larger K values, while Hicks had smaller K values than others. The sorption and desorption rate of Burley tobacco were greater than the other tobaccos. The monomolecular-layer moisture was 27.8 and 51.4mg/g, and the specific surface was 101 and $186m^2/g$, for Basma and Burley, respectively.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.110-118
• /
• 2004

The corrosion of pure titanium (CP- Ti Grade 2) and titanium alloy (Ti6Al4V ELI) were studied under various conditions of simulated body fluids. The static immersion test and the electrochemical test were performed in accordance with ISO 10271 : 2001. For the electrochemical test, the open circuit potential was monitored as a function of time, and the cyclic polarization curve was recorded. The corrosion resistance was evaluated from the values of corrosion potential, passivation current density, breakdown potential, and the shape of hysteresis etc. The effects of alloy type, surface condition, temperature, oxygen, and constituents in the fluids such as acid, chloride were estimated. Both specimens had extremely low dissolution rate in the static immersion test. They showed strong passivation characteristics in the electrochemical test. They maintained negligible current density throughout the wide anodic potential range. The passive layer was not broken up to 2.0 V (vs. SCE). The hysteresis and the shift of passivation potential toward the anodic direction was observed during the reversed scan. The passivation process appeared to be accelerated by oxygen in air or that dissolved in the fluids. The passivation also proceeded without oxygen by the reaction of constituents in the fluids. Acid or chloride in the fluids, specially later weakened the passive layer, and then induced higher passivation current density and less shift of passivation potential in the reversed scan. CP-Ti Grade 2 was more reactive than Ti6Al4V ELI in the fluids containing acid or chloride, but thicker layer produced on its surface provided higher corrosion resistance.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.36-38
• /
• 2013

Eight sample panels using an indium tin oxide(ITO)-coated glass substrate were fabricated, with barrier ribs formed of 55 ${\mu}m$ height and 10 ${\mu}m$ width. The upper and lower substrates were designed with the same panel condition, so a cell gap of 110 ${\mu}m$ was obtained. The charged particles in a cell consisted of $TiO_2$ (for white color) or carbon black (black color), negative or positive charge control agents, and a polymer. The average diameter of the two types of particles was commonly 10 ${\mu}m$, and their q/m value was -4.5 ${\mu}C/g$ and +4.5 ${\mu}C/g$, respectively. The electrically opposite particles mixed by an agitator were loaded into their cells by a simple particle-loading method. The discharging process proceeded at a humidity of 80% and a temperature of $30^{\circ}C$. Reflectivity was measured depending on discharging time, and a hysteresis curve by bias voltage obtained for comparison between the neutralized and non-neutralized panel, in which the superior optical property of the neutralized panel was ascertained.

• 한국자기학회지
• /
• 제3권1호
• /
• pp.29-33
• /
• 1993

$1{\times}10^{-6}$Torr의 진공에서 열저항 가열식 진공증착 방법으로 제작한 $Permalloy/Al_{2}O_{3}/Co$ 강자성 터널집합의 자기저항 효과를 조사하였다. 이 논문에서는 제작한 강자성 터널접합 시료의 전류-전압 특성과 자기 valve 효과를 측정하고, 시료진동형자기계로 측 정한 자기이력곡선을 통하여 터널저항의 히스테리시스성 자장 의존성을 조사하였다. 터널링은 전류-전압 특성을 측정함으로써 확인 되어진다. 자기저항의 히스테리시스 곡선은 자화의 히스테 리시스 곡선과 잘 대응한다. 측정한 자기저항비 ${\Delta}R/R$은 실온에서 약 0.6% 였다.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.79-85
• /
• 2004

디지털 방식으로 제어되는 아날로그 회로에서는 bang-bang 진동이 발생하며, 이 때 사용되는 FSM 이진 카운터의 MSB가 천이하는 곳에서 발생하는 bang-bang 진동은 큰 glitch를 발생시켜 DLL에 적용될 경우, 출력 클록의 지터를 크게 증가시킨다. 본 논문에서는 카운터 값의 증감에 따라 MSB의 천이점에 hysteresis가 발생하는 새로운 형태의 escalator 코드 카운터를 제안한다. 이 카운터는 DLL의 locking 시 발생하는 bang-bang 진동을 최소 단위의 소자로 제어하게 함으로서 glitch의 발생 요인을 원천적으로 제거한다. 이 카운터를 사용한 DLL을 설계 시뮬레이션하여 규격 조건에서 최대 35ps 이상 지터가 줄어드는 것을 확인하였으며 이를 고속 packet-base DRAM의 이중 루프 DLL에 적용하여 데이터 윈도우를 극대화하였다.