• Title/Summary/Keyword: temperature fluctuations

Search Result 379, Processing Time 0.029 seconds

STUDIES OF GRAVITY WAVES USING MICHELSON INTERFEROMETER MEASUREMENTS OF OH(3-1)BANDS

  • Won, Young-In;Cho, Young-Min;Lee, Bang-Yong;Kim, J.
    • Journal of Astronomy and Space Sciences
    • /
    • v.18 no.1
    • /
    • pp.21-26
    • /
    • 2001
  • As part of a long-term program for polar upper atmospheric studies, temperatures and intensities of the OH(3-1) bands were derived from spectrometric observations of airglow emissions over King Sejong station($62.22^{circ}S,\;301.25^{circ}E$). These measurements were made with a Michelson interferometer to cover wavelength regions between 1000nm and 2000 nm. A spectral analysis was performed to individual nights of data to acquire information on the waves in the upper mesosphere/lower thermosphere. It is assumed that the measured fluctuations in the intensity and temperature of the OH (3-1) airglow were caused by gravity waves propagating through the emission layer. Correlation of intensity and temperature variation revealed oscillations with periods ranging from 2 to 9 hours. We also calculated Krassovsky’s parameter and compared with published values.

  • PDF

Photoluminescence property of vertically aligned ZnO nanorods.

  • Das, S.N.;Kar, J.P.;Choi, J.H.;Myoung, J.M.
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2009.11a
    • /
    • pp.25.2-25.2
    • /
    • 2009
  • Vertically aligned zinc oxide(ZnO) nanorods (NRs) with different surface morphology were grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrate with different deposition condition. Based on the surface morphology, ZnO nanostructures are divided into three types: nanoneedles, nanonails and nanorods with rounded tip. Variable temperature photoluminescence (PL) have employed to probe the exciton recombination in high density and vertically aligned ZnO Nanorod arrays. Low temperature photoluminescence measurements do not show any significant yellow emission, but the near band edge excitonic emission shows very strong dependence with the surface morphology. The recombination properties are expected to be different due to different surface-to-volume ratio and distribution of potential fluctuations of intrinsic defects.

  • PDF

Nuclear Magnetic Resonance Study of the Raman Spin-Phonon Processes in the Relaxation Mechanisms of Double Sulfate Li3Rb(SO4)2 Single Crystals

  • Heo, Cheol;Lim, Ae-Ran
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.15 no.1
    • /
    • pp.40-53
    • /
    • 2011
  • The NMR spectra of $Li_3Rb(SO_4)_2$ crystals and their relaxation processes were investigated by using $^7Li$ and $^{87}Rb$ NMR. The relaxation rates of the $^7Li$ and $^{87}Rb$ nuclei in the crystals were found to increase with increasing temperature, and can be described by the relation $T_1^{-1}{\propto}AT^2$. The dominant relaxation mechanism for these nuclei with electric quadrupole moments is provided by the coupling of these moments to the thermal fluctuations of the local electric field gradient via Raman spin-phonon processes.

NUMERICAL ANALYSIS OF INTERACTION BETWEEN SUPERSONIC JET AND PERPENDICULAR PLATE

  • Yasunobu T;Matsuoka T;Kashimura H;Setoguchi T
    • Journal of computational fluids engineering
    • /
    • v.10 no.1
    • /
    • pp.39-44
    • /
    • 2005
  • The numerical investigation of the interaction between the underexpanded supersonic jet and the perpendicular plate is carried out using the TVD numerical method. The wave structure in the flowfield and the pressure and temperature distributions on the plate surface are obtained by the numerical analysis. Especially, the influence of self-induced flow oscillation caused by the impinging jet and the characteristic of impinging jet are shown. From the result of the numerical analysis, it is concluded that the pressure and the temperature fluctuations on the plate surface strongly depends on the pressure ratio in the flowfield and the position of plate.

A study of turbulent premixed flame structure in a plane shear layer (평면전단층의 난류예혼합 화염의 구조에 관한 실험적 연구)

  • 이재득;최병륜
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.13 no.4
    • /
    • pp.33-39
    • /
    • 1989
  • A turbulent premixed flames of layer formed between burned hot gas and unburned mixture were investigated by means of schlieren photograph with fluctuations of temperature and ion current. The combustion intensity between burned hot gas and shear layer was higher than the intensity between unburned mixture and shear layer. A wrinkled laminar flame and flamelet were appeared at downstream to exist and distributed reaction zone was at upstream as a result of analyzed probability density functions of temperature fluctuation. The initial combustion intensity of reaction zone of eddy between burned hot gas and shear layer was higher than that of final, flowing downstream, and vice versa between unburned mixture and shear layer.

  • PDF

Combustion and Emission Characteristics of High Calorific Industrial Waste Burned in a Small-scale Incinerator (고 발열량 산업폐기물을 처리하는 소형 소각로의 소각 및 배출 특성)

  • Lee, Gyo-Woo;Lee, Sung-Jun;Kim, Byung-Hwa;Lee, Seung-Woo;Jurng, Jong-Soo
    • Journal of the Korean Society of Combustion
    • /
    • v.7 no.2
    • /
    • pp.42-48
    • /
    • 2002
  • Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.

  • PDF

A Diagnostic Method of Control-in/out in the Glass Furnace

  • Cho, Jin-Hyung;Lee, Sae-Jae;Jang, Do-Soo
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.29 no.1
    • /
    • pp.151-154
    • /
    • 2006
  • The high degree of viscosity and the non-Newtonian fluid dynamics characterizes the process inside a glass furnace. Because the temperature is fluctuating in very short time-intervals, it is hard to determine that the status of its fluctuation is stable or unstable. Usually Shewhart-chart is used to determine the control status. However because of the characteristics of the temperature fluctuations in the glass furnace it does not directly serve the purpose here. Therefore we suggest using ARIMA to diagnose control status and confirm that the method using ARIMA can be a better tool than Shewhart-chart.

Twelve Years Changes in Local climate Factors and Annual fluctuations of Seed Production of the Carpinus tschonoskii Forest in Mt. jiri in Southern Korea (지리산 개서어나무림에서의 12년간 지역기후의 변화에 따른 연간 종자생산량의 변동)

  • 임영득;홍선기
    • The Korean Journal of Ecology
    • /
    • v.21 no.6
    • /
    • pp.809-814
    • /
    • 1998
  • Changes of annual seed production related to climate change were studied for 12 years in Piagol, a riparian valley in Mt. Jiri. Sixty-four seed traps (sized 0.5 ${\times}$ 0.5 $m^{2}$) were set up on the forest floor of surveyed area. Seeds were collected from these traps at an interval of 15 days from September to November since 1984. Vegetation of the study area was mainly consisted of the naturally regenerated Carpinus tschonoskii in the tree layer. Acer mono, Quercus serrata, Carpinus laxiflora and Symplocos chinensis also appeared in the same layer. Maximum production occurred in 1984 and 1994. As a result of comparing seed production with local climate factors for 12 years, seed productivity and the year of maximum production of Carpinus forest were merely related with precipitation, air temperature and duration of sunshine among local climate factors. Duration of sunshine was, however, not contributed to periodically high productivity of seed of riparian valley carpinus forest.

  • PDF

A review on thermomechanical properties of polymers and fibers reinforced polymer composites

  • Saba, N.;Jawaid, M.
    • Journal of Industrial and Engineering Chemistry
    • /
    • v.67
    • /
    • pp.1-11
    • /
    • 2018
  • Polymer composites offered broad engineered applications, however their diversity get restricted owing to fluctuations in thermomechanical properties during heating or cooling hence great concern required prior their applications through thermomechanical analysis (TMA). Traditionally, TMA or dilatometry found to be simple, ideal, reliable, sensitive, excellent and basic thermal analytical technique. TMA provides valuable information on thermal expansion, glass transitions temperature (Tg), softening points, composition and phase changes on material of having different geometries simply by applying a constant force as a function of temperature. This compilation highlights the basics and experimental of TMA for both research and technical applications and also provide literature on TMA of polymers, hybrid composites, nanocomposites and their diverse applications.

Study of thermoacoustic oscillations in half-open tubes for saturated superfluid helium

  • Wang, Xianjin;Niu, Xiaofei;Bai, Feng;Zhang, Junhui;Chen, Shuping
    • Progress in Superconductivity and Cryogenics
    • /
    • v.24 no.3
    • /
    • pp.68-73
    • /
    • 2022
  • Thermoacoustic oscillations (TAOs) are spontaneous pressure oscillations frequently seen in hydrogen or helium cryogenic systems. Half-open tubes connected to cryogenic fluid with a closed room temperature end have a high potential for oscillation generation. Thermoacoustic oscillations will result in significant pressure fluctuations and additional heat load, endangering the security and stability of the cryogenic system. The goal of this paper is to investigate TAOs in superfluid helium using both theoretical and experimental methods. Five half-open tubes with varied typical inner diameters inserted into superfluid helium were installed in a test cryostat. The onset characteristics of thermoacoustic oscillations were presented and studied. The effect of temperature profile was discussed. Finally, a simple eliminating method was introduced.