• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.288-295
• /
• 2000

It has been tried to decrease the crosslink density of vulcanized EPDM (ethylone-propylene-diene terpolymer) rubber through a chemical devulcanization treatment. Phase transfer catalyst, alkali metal (i.e., sodium), and triphenylphosphine have been used as a chemical agent ul the devulcanization treatment. Also it has been estimated the effect of the devulcanization treatment in the case of utilization of 2-butanol as a devulcanization reaction solvent. In the devulcanization treatment using quaternary ammonium salt as a phase transfer catalyst. the devulcanization effect has been studied with the variation of catalyst molecular weight and the choice of bromide or chloride cation. In the devulcanization treatment using sodium, it has been estimated the devulcanization treatment effect depending upon the variation of reaction variables such as amount of sodium used, reaction temperature, pressure of hydrogen gas, which is used as a reaction environment. The $M_c$ value (number average molecular weight between two crosslink points) has been experimentally estimated by the equilibrium swelling method and it is quantitatively related to the crosslink density. The estimation of devulcanization effect for vulcanized EPDM rubber has been carried out by the comparison of the $M_c$ values between the untreated and the treated specimens.

• The Korean Journal of Applied Statistics
• /
• v.18 no.2
• /
• pp.281-296
• /
• 2005

This article summarizes our research on estimation of area-specific and time-adjusted rainfall rates during 2004KEOP (Korea enhanced observation period: June 1, $2004{\sim}$ August 31, 2004). The rainfall rate is defined as the proportion of rainfall days per week and areas are consisting of Haenam, Yeosu, Janghung, Heuksando, Gwangju, Mokpo, Jindo, and Wando. Our objectives are to analyze periodicity in area-specific precipitation and the meteorological measures and investigate the relationships between the geographic pattern of the rainfall rates and the corresponding pattern in potential explanatory covariates such as temperature, wind, wind direction, pressure, and humidity. A generalized linear model is introduced to implement the objectives and the patterns are estimated by considering a set of rainfall rates produced using samples from the posterior distribution of the population rainfall rates.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.673-685
• /
• 2001

In this study, the drought indicator is calculate from the rainfall, daily highest temperature, streamflow and Palmer Drought Severity Index(PDSI) for water plan and drought management in a relatively wide region. Three levels of drought severity, called drought watch, drought warning, and drought emergency, are established for these series which determine exceedance levels. The 25% nonexceedance level is used for drought watch, 10% for drought warning, and 5% for drought emergency to figure how well the drought indicators represent the past-drought and that those can be used for drought monitoring. As a result, 9-month and 12-month precipitation, and PDSI series shows the best consistency and high correlation indicate droughts. Because the results are based on the gauged data and simply calculated, the suggested indices can be used for basic data for drought monitoring system of a basin.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.102-114
• /
• 2006

This study aims to develop a method to analyze droughts in Nakdong river area. Satellite imagery can be applied to droughts monitoring because it can afford periodic data for large area for long time. In this study, supposing that evapotranspiration and NDVI are closely related to each other, we presented a method to estimate evapotranspiration in large area with NDVI from MODIS data and temperature. For the final analysis of droughts, water deficit is calculated by climatological water balance using the distribution of evapotranspiration and precipitation. As the results of this study, we improved the usability of satellite imagery, especially in drought analysis.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1165-1182
• /
• 2011

The evaluation of potential submarine groundwater is an important research topic for exploring an alternative water resource. Two different approaches, water budget analysis and Rn mass balance method, were employed to investigate the annual variation of submarine groundwater discharge in 2010 at a marine watershed located at the south-eastern part of Korean Peninsula. In order to obtain reliable hydrological data during study period, temporal and spatial variations of rainfall and soil moisture had been collected and hydro-meterological data such as temperature, humidity and wind speed were collected The runoff response was simulated using SCS-CN method with spatial distributions of landuse and soil texture from GIS analysis. Six different methods were used to estimate the monthly variation of evapotranspiration and field measurements of soil moisture were used to account for the infiltration. Comparisons of infiltration and surface runoff between simulation and water balance with measurements showed coincidence. The water budget analysis and Rn mass balance method provide mean daily submarine groundwater as 5.35 and 4.07 $m^3/m/day$ in 2010, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.67.3-68
• /
• 2016

An X1.6 flare occurred in AR 12192 on 2014 October 22 around 14:06 UT and was observed by Hinode, IRIS, SDO and RHESSI. We analyze a bright kernel which produces a white light flare (WLF) with continuum enhancement and a hard X-ray (HXR) peak. Taking advantage of the spectroscopic observations of IRIS and EIS, we measure the temporal variation of the plasma properties in the bright kernel in the chromosphere and corona. We found that explosive evaporation was observed when the WLF occurred, even though the intensity enhancement in hotter lines is quite weak. The temporal correlation of the WLF, HXR peak, and evaporation flows indicates that the WLF was produced by accelerated electrons. To understand the white light emission processes, we calculated the deposited energy flux from the non-thermal electrons observed by RHESSI and compared it to the dissipated energy estimated from the chromospheric lines (Mg II triplet) observed by IRIS. The deposited energy flux from the non-thermal electrons is about $3.1{\times}10^{10}erg\;cm^{-2}s^{-1}$ when we assume a cut-off energy of 20 keV. The estimated energy flux from the temperature changes in the chromosphere measured from the Mg II subordinate line is about $4.6-6.7{\times}10^9erg\;cm^{-2}s^{-1}$, 15 - 22 % of the deposited energy. By comparison of these estimated energy fluxes we conclude that the continuum enhancement was directly produced by the non-thermal electrons.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.335-343
• /
• 2006

We have designed the system that measure one channel ECG by two electrode and extract real-time EDR with more related resipiration and comportable to subject by using conductive textile. On the assumption that relation between RL electrode and potential measurement electrode is coupled with RC connected model, we designed RL drive output to feedback two electrode for reduction of common mode signal. The conductive textile which was used for two ECG electrode was offered more comfort during night sleep in bed than any other method using attachments. In the method of single-lead EDR, R wave point or QRS interval area could be used for EDR estimation in traditional method, it is, so to speak, the amplitude modulation(AM) method for EDR. Alternatively, R-R interval could be used for frequency modulation(FM) method based on Respiratory Sinus Arrhythmia(RSA). For evaluation of performance on AM EDR and FM EDR from 14 subject, ECG lead III was measured. Each EDR was compared with both temperature around nose(direct measurement of respiration) and respiration signal from thoracic belt(indirect measurement of respiration) on mean squared error(MSE), cross correlation(Xcorr), and Coherence. The upsampling interpolation technique of multirate signal processing is applied to interpolating data instead of cubic spline interpolation. As a result, we showed the real-time EDR extraction processing to be implemented at micro-controller.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.360-368
• /
• 2012

Objective: This study was carried out to use pine needles as a passive air sampler (PAS) of atmospheric Polychlorinated Biphenyls (PCBs). Methods: PCB concentrations in ambient air ($C_a$, ng/$m^3$) and deposited on pine needles ($C_p$, ng/g dry) were analyzed simultaneously from June 1 to December 31. Air samples were taken using a low volume PUF active air sampler and the overall average air volume was about 900-1,000 $m^3$. Pine needles were collected at the end of August and December near the air sampler. Results: $C_a$ were higher at higher air temperature and lower chlorinated PCB congeners, but $C_p$ showed irregular distribution. The average PCB sampling rates from air to pine needles were 0.116 (0.002-0.389) $m^3$/day - g dry. Conclusions: A poor correlation was shown between $C_a$ and $C_p$. However, a good correlation was shown between the logarithm of octanol-air partitioning coefficient ($logK_{oa}$) and log ($C_p/C_a$), and the interrelation was better with longer sampling time (June to December) than shorter sampling time (June to August). The average PCB sampling rates from air to pine needles were the lowest with respect to PUF disk, XAD-2 resin and semipermeable membrane devices (SPMDs) PAS. The average ratio ($C_{a-calc}/C_{a-meas}$) of calculated ($C_{a-calc}$) and measured ($C_{a-meas}$) PCB concentration was 0.69 with a shorter sampling time and 1.24 with a longer, so $C_{a-calc}$ was close to $C_{a-meas}$. It was found that pine needles can be used as PAS of atmospheric PCBs, and are especially suitable for long-time PAS.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.66.2-66.2
• /
• 2017

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administrative (NASA) and install it on the International Space Station (ISS). The coronagraph is an externally occulted one stage coronagraph with a field of view from 2.5 to 15 solar radii. The observation wavelength is approximately 400 nm where strong Fraunhofer absorption lines from the photosphere are scattered by coronal electrons. Photometric filter observation around this band enables the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with the high time cadence (< 12 min) of corona images to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in 2017 August for the filter system and to perform a stratospheric balloon experiment in 2019 for the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g. coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.679-688
• /
• 2010

The major objective of the present study is to extend the applications of inverse analysis to more realistic engineering fields with a complex combustion process rather than the traditional simple heat-transfer problems. In order to do this, the unknown initial mass fractions of $CH_4/O_2$ are estimated from the temperature measurement data by inverse analysis in the practical diffusion-controlled turbulent combustion problem. In order to ensure efficient inverse analysis, the repulsive particle swarm optimization (RPSO) method, which belongs to the class of stochastic evolutionary global optimization methods, is implemented as an inverse solver. Based on this study, it is expected that useful information can be obtained when inverse analysis is used in the diagnosis, design, or optimization of real combustion systems involving unknown parameters.