• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.34-38
• /
• 2015

This research was conducted to establish efficient methods to overcome high temperature and low humidity with light selective shading agent and two-fluid fogging system in greenhouses in hot season. There were four experimental treatments; not treated (Non), fogging by two-fluid fogging system (Fog), spraying onto the greenhouse surface with shading coating agent (Coat), and using fogging and coating together (F&C). The amount of solar radiation entered into the greenhouses was higher in Non, and then Fog, Coat, and F&C in descending order. Fog was more efficient to lower the air temperature and also raise relative humidity than Coat treatment. The crop temperature was about $6^{\circ}C$ higher in Control than the other treatments. F&C revealed as the most efficient method to control the environment inside the greenhouse, but fogging system seemed to be more economic. In stand-alone greenhouses spraying coating agent may be the appropriate choice because of their structural limitations, mainly eave height.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.237-244
• /
• 2009

We investigated the effects of acupuncture stimulation on pulse wave variables and heart rate variability (HRV) in healthy adults. To evaluate twenty healthy volunteers (10 men, 10 women) had acupuncture into both Hapkok (Ll4) and Taechung (Liv3) for 15 minutes. Radial pulse, Heart Rate Variability, body temperature and blood pressure were checked before and after acupuncture to evaluate Pulse Wave Variability and Autonomous Function. The results were as follows; Heart rate was significantly increased while systolic blood pressure (mmHg) and diastolic blood pressure (mmHg) were significantly increased after acupuncture treatment. Sixteen subjects didn't change representative pulse wave variables after acupuncture treatment. Energy, height of main peak (H1), height of pre-dicrotic valley (H2) and height of descending valley (H4) were decreased while height of dicrotic peak (H5) was significantly decreased after acupuncture treatment. Time to main peak (T1), time to pre-dicrotic valley (T2), time to dicrotic peak (T5), total time (T) and T-T4 were decreased while time to descending valley (T4) was increased after acupuncture treatment. Total area (At), area of main peak (Aw) and ratio of diastolic period area (Ad) were decreased while ratio of systolic period area (As) and angle of main peak (MPA) were increased after acupuncture treatment. The standard deviation of all normal RR intervals (SDNN) was increased while the root mean square of successive differences between the normal heart beats (RMSSD) was significantly increased after acupuncture treatment by time domain analysis. Low frequency power (LF) and LF/HF ratio were decreased while high frequency power (HF) was significantly increased after acupuncture treatment by frequency domain analysis. This study suggests that acupuncture treatment changes pulse wave variability and heart rate variability. Further study on various acupuncture treatment for pulse wave variability and heart rate variability is required.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.214-218
• /
• 2013

This study was carried out to find out suitable input method for air exchange about bottle cultivation of oyster mushroom. There was no difference of average temperature in cultivation room, but T1(direct introduction of outside air) was higher than T2(heat exchanger) and T3(air buffer) in the standard deviation. The ratio of cooling operating was the highest in August and in the descending order, T1 54%, T3 43%, T2 33%. At ratio of energy reduction, T2 and T3 were higher than T1. The operating ratio of heater was highest in January and in the descending order, T1 53%, T3 37%, T2 30%. At ratio of energy reduction(%), T2 and T3 were higher than T1 similar to result of cooling operating. Therefore there were largest in August about Cooling Degree-Hour and in January about Heating Degree-Hour. And fruitbody yields quality was excellent in T2 and T3 than T1. The suitable effective type of air exchange in oyster mushroom cultivation are heat exchange and air buffer system.

• Journal of Acupuncture Research
• /
• v.18 no.6
• /
• pp.171-187
• /
• 2001

Objective : Moxibustion has been proved efficacious for many diseases, but isn't widespread in the clinics due to a danger of skin burning, the smoke produced while burning a moxa combustion and so on. Therefore, another type of moxa that can be resolved these troubles is required. To improve the effect of moxibustion and develop the new thermal stimulating treatment, the performance of commercial moxibustion widely used are studied systematically and found out quantitatively. Methods : We have selected two types (small-size moxa A(sMA), small-size moxa B (sMB)) among small-size moxaes used widely in the clinic. We examined combustion time, various temperatures, temperature gradient in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period appeared somewhat longer in sMA than in sMB. 2, The combustion time in the heating period appeared longer in sMA by 26% than in sMB. 3. The average temperature in the heating period was $37.6{\sim}37.8^{\circ}C\;in\;sMA\;and\;36.2{\sim}36.8^{\circ}C$ in sMB and the maximum temperature measured at a center of contact surface in sMA was $48.6^{\circ}C$, higher by over $2.8^{\circ}C$ than that of sMB moxibustion. 4. The average ascending temperature gradient in the heating period was $0.08{\sim}0.1^{\circ}C/sec$ in both moxaes, and the average ascending temperature gradient of heating period in sMB appeared larger. The maximum ascending temperature gradient appeared higher in sMB, and the time reaching maximum ascending temperature gradient appeared much earlier in sMA than in sMB. 5. The combustion time in the retaining period was around 100 sec in sMA and around 275 sec in sMB. 6. The average temperature in the retaining period was $42.2{\sim}46.0^{\circ}C\;in\;sMA\;and\;39.3{\sim}41.4^{\circ}C/sec$ in sMB. The minimum temperature in the retaining period was over $38.80^{\circ}C$ in sMA but just $34.7^{\circ}C$ in sMB. 7. The average descending temperature gradient in sMA was $-0.050{\sim}0.067^{\circ}C/sec$ and in sMB was $-0.030{\sim}0.037^{\circ}C/sec$ 8. The combustion time in the cooling period appeared longer over two times in sMA than in sMB, and the time which the cooling period (minimum temperature) finished at appeared later in sMB by 55 sec. 9. We classified the combustion process that the measured temperature rose over body heat($37^{\circ}C$) into the effective combustion period. The effective combustion time was 233.3 sec in sMA and 300.4 sec in sMB respectively, and was longer by about 29% in sMB. The average temperature and maximum temperature in the effective combustion time appeared higher in sMA. The time taken until the maximum temperature was reached was 225.1 sec in sMA and 244.5 sec in sMB, faster by about 20 sec in sMA. The maximum ascending temperature gradient during the effective combustion period appeared larger about 1.4 times in sMB, but the time when the maximum ascending temperature gradient happened was faster in sMA. Conclusion : It appears that sMB, compared with sMA, is proper if necessary to apply the long time and weak stimulus, because of the gentle stimulus during the relatively longer time. In contrast, sMA that the symmetrical combustion happened is proper if necessary to apply the short time and strong stimulus.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.51-56
• /
• 1998

This study was carried out to evaluate environmental and ecological characteristics of natural habitat for cultivation of Epimedium koreanum. Habitat of E. koreanum was the slope foot of mountain descending gradually toward mostly northwest from top of mountain with slope of $2{\sim}20%$ and the altitude ranged from 60 to 400m above the sea level. Some physiochemical characteristics of habitat soil were as follows: pH, $4.1{\sim}5.8$, organic matters content, $4.9{\sim}6.6%$ and cation exchange capacity, $14.8{\sim}34.3\;me/100g$ soil, respectively. Habitats were shaded by deciduous broad-leaved tree mainly, and compared with those of naked area, relative photon flux density was $3.5{\sim}13.1%$ and relative luminance was $3.3{\sim}11.9%$ due to shading. Air temperature of habitat under shade was $4.3{\sim}6.5^{\circ}C$ lower than that of naked area. Habitat soil temperature was lower than that of naked area but temperature range was smaller than that of naked area. E. koreanum plants were growing with semishading plants under shade of tree leaf. From investigation of natural characteristics of habitat, it was concluded that E. koreanum plant would grow at place with a little change in temperature and moisture of soil which was caused by shading and mulching with litterfall of broad-leaved tree.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1025-1029
• /
• 2008

Fresh green tea leaf extracts were prepared by different enzyme treatment conditions, such as concentration, treating time and treating temperature using complex enzyme, Rapidase TF, and then extracted for 30 min at $80^{\circ}C$ to investigate their physicochemical properties. The results showed that free sugar content in every sample tended to increase, especially glucose content was increased up to 7.25 times compared to the control. Total amino acid was barely affected by the enzyme treatment and caffeine content was increased with reaction temperature. Total polyphenol and total catechin content was increased according to the amount of enzyme added and reaction temperature. Regardless of enzyme treatment conditions, composition of catechins were epigallocatechin, epicatechin, epicatechin gallate and epigallocatechin gallate by descending order of the content. Gallic acid content increased up to 0.04% and $45^{\circ}C$ with no further significant changes thereafter. From the results above, we could conclude that a simple and new method to extract green tea materials directly from fresh green tea leaves with improved extract ratio may be introduced by adding $0.08{\sim}0.1%$ of Rapidase TF to heat treated fresh green tea leaves and keeping temperature at $37{\sim}45^{\circ}C$ for $180{\sim}240\;min$ in order to skip existing complicated procedures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.337-346
• /
• 1992

Hydroacoustic surveys were conducted in the East China Sea, in the summers of 1990-1991 to investigate the distribution and migration behavior of fish, such as the diel changes in the distributions of fish, the thermoselection behavior of fish, and the fish reactions to a surveying vessel. The hydroacoustic observations were taken with a scientific echo sounder operating at 50kHz and a microcomputer-based echo processor. Fish samples were collected by bottom trawling and temperature was measured with a DBT system. The patterns of fish distributions were compared with the vertical profiles of water temperature. The results obtained can be summarized as follows: 1. The time series of hydroacoustic observations on the downward migration at dawn in the central region of East China Sea showed that the migration rate was 0.24 m/min. In this region, most of the fish collected by bottom trawling during the surveys were squid (Photologio edulis f. budo) and horse mackeral (Trachurus japonicus). 2. The hydroacoustic observations, which together associated with temperature data, indicated that squid and horse mackeral concentrated nocturally in a narrow vertical band of thermocline, particularly in summer when the survey region was strongly stratified. This result suggest that the nocturnal vertical distribution of these species evidently is controlled by temperature. 3. When the survey vessel, that is running at a speed of 11 knots, has suddenly stopped, the fish which concentrated beneath the transducer showed a strong avoidance reaction in the form of rapid downward migration. After a few minutes, the descending reaction disappeared and the fish slowly began the upward migration toward their original swimming positions. Trawl data suggest that the fish, which showed the avoidance reaction, was Liparis tessellatus.

• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.2
• /
• pp.29-46
• /
• 1991

Benthic marine algal community of a sea bank at Joomoonjin, in the eastern coast of Korea, was investigated monthly in view of floristic composition and seasonal periodicity during from August, 1989 to July 1990. Total number of benthic alga identified were 70 taxa, which composed of 7 species of Chlorophyta, 21 species of Phaeophyta and 42 species of Rhodophyta. The dominant species were Sargassum horneri, Underia pinnatifida, Laminaria japonica and Pachymeniopsis sp.. Vegetation, from the point of phygiognomy, was a mosaic type by these dominant species. The flora was compared with similarity index using S${\phi}$rensen coefficient and grouped by a cluster analysis. As a result, the algal community of this area could be divided into two clusters at similarity level 45% : Flora of water temperature-ascending period(January-July) and flora of water temperature-descending period(August-December). And also, the former flora was subdivided into two clusters at point of the $14^{\circ}C$ sea water temperature : winter flora(January-April) and spring-summer flora(May-July). The flora of this area was characterized as a mixed flora of cold and temperature zone by Cheney's index.

• Journal of Acupuncture Research
• /
• v.21 no.3
• /
• pp.193-214
• /
• 2004

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.178-188
• /
• 2017

Purpose: We compared the effects of newly developed diode laser (Bison 808 nm Diode laser) on the treatment of peri-implantitis with conventional products (Picasso 810 nm Diode laser) by comparing the surface temperature of titanium disc and bacterial sterilization according to laser power. Materials and Methods: The titanium disc was irradiated for 60 seconds and 1 - 2.5 W using diode laser 808 nm and 810 nm. The surface temperature of the titanium disc was measured using a temperature measurement module and a temperature measurement program. In addition, in order to investigate the sterilizing effect according to the laser power, 808 nm laser was irradiated after application of bacteria to sandblasted large-grit acid-etched (SLA) and resorbable blast media (RBM) coated titanium discs. The irradiated disks were examined with scanning electron microscopy. Results: Both 808 nm and 810 nm lasers increased disk surface temperature as the power increased. When the 810 nm was irradiated under all conditions, the initial temperature rise rate, the descending rate, and the temperature change before and after was higher than that of 808 nm. Disk surface changes were not observed on both lasers at all conditions. Bacteria were irradiated with 808 nm, and the bactericidal effect was increased as the power increased. Conclusion: When applying these diode lasers to the treatment of peri-implantitis, 808 nm which have a bactericidal effect with less temperature fluctuation in the same power conditions would be considered safer. However, in order to apply a laser treatment in the dental clinical field, various safety and reliability should be secured.