• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.255-264
• /
• 2019

In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens ($70{\times}70cm$) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multi-layered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.127-136
• /
• 2019

Sweet sorghum (Sorghum bicolor L. Moench), compared to traditional crops, has been evaluated as a useful crop with high adaptability to the environment and various uses, but cultivation has not expanded owing to a lack of related research and information in Korea. This study was conducted to estimate heading date in 'Chorong' sweet sorghum based on climate data of the last 30 years (1989 - 2018) from six regions (Jeonju, Buan, Jeongup, Imsil, Namwon, and Jangsu) in Jellabuk Province. In addition, we compared the growth and quality factors by sowing date (April 10, April 25, May 10, May 25, June 10, June 25, and July 10) in 2018. Days from sowing to heading (DSH) increased to 107, 96, 83, 70, 59, 64, and 65 days in order of the sowing dates, respectively, and the average was 77.7 days. The effective accumulated temperature for heading date was $1,120.3^{\circ}C$. The mean annual temperature was the highest in Jeonju, followed in descending order by Jeongup, Buan, Namwon, Imsil, and Jangsu. The DSH based on effective accumulated temperature gradually decreased in all sowing date treatments in the six regions during the last 30 years. DSH of the six regions showed a negative relationship with mean temperature (sowing date to heading date) and predicted DSH ($R^2=0.9987**$) calculated by mean temperature was explained with a probability of 89% of observed DSH in 2017 and 2018. At harvest, fresh stem weight and soluble solids content were higher in the April and July sowings, but sugar content was higher in the May 10 ($3.4Mg{\cdot}ha^{-1}$) and May 25 ($3.1Mg{\cdot}ha^{-1}$) sowings. Overall, the April and July sowings were of low quality and yield, and there is a risk of frost damage; thus, we found May sowings to be the most effective. Additionally, sowing dates must be considered in terms of proper harvest stage, harvesting target (juice or grain), cultivation altitude, and microclimate.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.359-364
• /
• 2008

The development of Aulacorthum solani (Kaltenbach) was studied at temperatures ranging from 12.5 to $27.5^{\circ}C$ under $65{\pm}5%$ RH, and a photoperiod of 16:8 (L:D). Mortality of $1st{\sim}2nd$ nymph was higher than that of $3rd{\sim}4th$ nymph at the most temperature ranges whereas at high temperature of $27.5^{\circ}C$, more $3{\sim}4th$ nymph stage individuals died. The total developmental time ranged from 16.9 days at $12.5^{\circ}C$ to 6.6days at $22.5^{\circ}C$, suggesting that higher the temperature, faster the development. However, at higher temperature of $25^{\circ}C$ the development took 7.4 days. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $0.08^{\circ}C$ and 162.8 day-degreeslated development. The nonlinear shape of temperature rewas well described by the modified Sharpe and DeMichele model. When the normalized cumulative frequency distributions of developmental times for each life stage were fitted to the three-parameter Weibull function, attendance of shortened developmental times was apparent with in $1{\sim}2nd$ nymph, $3{\sim}4th$ nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.86 and 0.91.

• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.213-219
• /
• 2007

The development of Schizaphis graminum (Rondani) was studied at various constant temperatures ranging from 15 to $32.5^{\circ}C$, with $65{\pm}5%$ RH, and a photoperiod of 16L:8D. Mortality of the $1_{st}-2_{nd}\;and\;the\;3_{rd}-4_{th}$ stage nymphs were similar at most temperature ranges while at high temperature of $32.5^{\circ}C$, more $3_{rd}-4_{th}$ stage individuals died. The total developmental time ranged from 13.8 days at $15^{\circ}C$ to 4.9 days at $30.0^{\circ}C$ suggesting that the higher the temperature, the faster the development. However, at higher end temperature of $32.5^{\circ}C$ the development took 6.4 days. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $6.8^{\circ}C$ and 105.9 day-degrees, respectively and the nonlinear shape of temperature related development was well described by the modified Sharpe and DeMichele model. The normalized cumulative frequency distributions of developmental period for each life stage were fitted to the three-parameter Weibull function. The attendance of shortened developmental times was apparent with $1_{st}-2_{nd}\;nymph,\;3_{rd}-4_{th}$ nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.80 and 0.87.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.767-776
• /
• 2004

Polymer concrete shows excellent mechanical properties and chemical resistance compared with conventional normal cement concrete. The polymer concrete is drawing a strong interest as high-performance materials in the construction industry. Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. Also the recycling of PET in polymer concrete would help solve some of the solid waste problems posed by plastics and save energy. The purposed of this paper is to propose the model for the stress-strain relation of recycled-PET polymer concrete at monotonic uniaxial compression and is to investigate for the stress-strain behavior characteristics of recycled-PET polymer concrete with different variables(strength, resin contents, curing conditions, addition of silane and ages). The maximum stress and strain of recycled-PET polymer concrete was found to increase with an increase in resin content, however, it decreased beyond a particular level of resin content. A ascending and descending branch of stress-strain curve represented more sharply at high temperature curing more than normal temperature curing. Addition of silane increases compressive strength and postpeak ductility. In addition, results show that the proposed model accurately predicts the stress-strain relation of recycled-PET polymer concrete

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2001

The levels of sanitary management procedures in university and industry foodservices, in pusan, were investigated. The questionnaires were administed to ninety three dietitians who managed university (n=21) and industry (n=72) foodservices and then the data were statistically analyzed. When sanitary management procedures were evaluated by 5 scales method of Likers, total mean scores of time-temperature management in the process of meal production, personal hygiene, equipments and facilities hygiene in university and industry foodseryice operations were 3.48, 3.76 and 3.27, repectively. In time-temperature management, the scores for storage, purchasing and receiving, pre-preparation, cooking, assembly and service, and hot or cold holding were 3.77, 3.74, 3.55, 3.54, 3.28, 3.05, respectively, in descending order. The management levels for personal hygiene, equipments and facilities hygiene of foodservices had biger serving scale (over 901) were significnatly higher than those of lower sclaled foodservices(below 900). The scores of foodservices managed by higher aged dietitian(over 31 years) were significantly higher than those of foodservices conducted by lower aged group(below 25 years) in the management procedures of time-temperature, personal hygiene, equipments and facilities hygiene(p<0.05). The dietitian group had the regular sanitary education showed significantly higher scores than irregularly educated group in the management of time-temperature and personal hygiene.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.253-263
• /
• 2011

Mineralogical characteristics of garnierite ores from the Nakety, Kouaoua, and Ouaco Ni laterite deposits in New Caledonia are investigated using optical microscopy, powder X-ray diffractometer, and electron proble microanalyzer. Green garnierite ores have colloform, cellular, and boxwork texture, which are formed by precipitation under low temperature surface environment. They are mainly composed of Ni-bearing talc~willemseite series mineral and partly of lizardite. In Ni-bearing talc~willemseite series mineral, NiO contents are Ouaco (average 40.63%), Nakety (average 28.58%), and Kouaoua (average 24.90%), in descending order. Ni atomic percentage replacing Mg in octahedral site are 43.5~85.0%. Dark brown garnierite ores show cellular or boxwork texture, and consist of lizardite~Ni lizardite with some Ni-bearing talc~willemseite series mineral. Ni contents in lizardite~Ni lizardite are 1.14~4.06 wt. % and Ni atomic percentage replacing Mg in octahedral site 1.7~6.8%. Low NiO content in dark brown garnierite attributes to high Fe content replacing Mg in octahedral site.

• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.125-137
• /
• 1996

This study was designed to investigate effects of relative humidity on the breakthrough of charcoal tubes at a fixed vapor concentration and sampling time during mixed organic vapor sampling. A vapor generator was used to generate three different concentrations of mixed organic vapor and a stainless steel chamber was fabricated and utilized to maintain three different percentages of relative humidity while maintaining a constant temperature. The results were as follows; 1. At high relative humidity, breakthrough of mixed organic vapor occurred quickly at low vapor concentration than at high vapor concentration because of the reduced adsorption volume of charcoal tube due to humidity. 2. Breakthrough by competitive adsorption of vapors onto charcoal tube was observed at first from n-hexane having the lowest boiling point and highest vapor pressure among the three organic vapors investigated, followed by TCE. No breakthrough was observed from toluene under all experimental conditions. 3. For n-hexane, breakthrough was observed after 2 hours of sampling and breakthrough rates were increased as relative humidity increased. For TCE, breakthrough was found after 3 hours of sampling and breakthrough rates by sampling time were increased as vapor concentration increased. 4. The adsorbed amount of mixed organic vapor at breakthrough was shown to have statistically significant correlations with sampling time, relative humidity, and vapor concentration in descending order of correlation. Relative humidity and sampling time for n-hexane and sampling time and concentration for TCE were both statistically significantly correlated. 5. Relative humidity was found to affect the amount of breakthrough of mixed organic vapor and n-hexane. Among three percentages of relative humidity investigated, the amount of breakthrough at 85 % relative humidity was significantly larger than those of at lower percentages of relative humidity. No statistically significant difference was found between 25 % and 55 % relative humidity. 6. The results of multiple regression analysis between breakthrough and relative humidity, vapor concentrations showed that the coefficient of determination of mixed organic vapor was 0.263 and those of n-hexane and TCE were 0.275 and 0.189, respectively. 7. Flow rates of sampling pumps used were found to be affected by relative humidity present. At 25 %, 55 %, and 85 % relative humidity, the relative errors of sampling pump were 1.4 %, 13.4 %, and 18.6 %, respectively. In conclusion, the results of this study showed that high relative humidity could reduce the adsorption volume of charcoal tubes and subsequently increase breakthrough rates. Therefore, to prevent breakthrough when sampling mixed organic vapors, it is suggested that either sampling volume be reduced on the flow rate be lowered so as to minimize breakthrough of the most volatile organic vapor in the mixture. In addition, since the flow rates of a sampling pump can be adversely affected by high relative humidity, it is recommended to use a constant flow mode pump when sampling in the highly humid environment.