• 한국해양학회지:바다
• /
• 제15권3호
• /
• pp.140-147
• /
• 2010

한국 남해에서 분리한 유해조류 Chattonella ovata의 성장에 미치는 수온과 염분 및 광량의 영향을 조사하였다. C. ovata는 $10{\sim}30\;^{\circ}C$의 수온과 7.5~40 psu의 염분조합 중 $10^{\circ}C$의 모든 염분조합과 $15^{\circ}C$의 7.5 psu와 10 psu, 그리고 $20^{\circ}C$와 $30^{\circ}C$의 7.5 psu를 제외한 모든 조합에서 성장하였다. 최대 성장속도는 $30^{\circ}C$, 30 psu 조합에서 $0.62\;day^{-1}$로 관찰되었다. 이원배치 분산분석(two-way ANOVA) 결과로부터 그들의 성장속도는 수온에 크게 의존할 뿐 염분과 교호작용의 영향은 미약하였다. 이와 같은 결과는 C. ovata가 고수온을 선호하는 광염성종임을 지시하였다. C. ovata는 $30\;{\mu}mol$ photons $m^{-2}s^{-1}$ 이하의 광량에서는 성장이 이루어지지 않았고, 본 연구에서 제공한 최대 광량인 $800\;{\mu}mol$ photons $m^{-2}s^{-1}$서 광 저해현상은 보이지 않았다. 광 조건에 의해 유도된 성장식 $\mu$=0.74(I-16.0)/(I+43.9)으로부터 성장에 대한 반포화광량($K_s$)은 $75.9\;{\mu}mol$ photons $m^{-2}s^{-1}$, 절대광량($I_c$)은 $16.0\;{\mu}mol$ photons $m^{-2}s^{-1}$로 나타났으며, 특히 $K_s$는 규조류인 Skeletonema costatum을 비롯한 다른 여러 편모조류보다 낮았다. 이상의 결과로부터 C. ovata는 하계 한국 내만과 연안해역에서 종간경쟁에 유리한 생리특성을 가진 종으로 판단되었다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2013년도 추계 학술발표논문집
• /
• pp.67-72
• /
• 2013

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.269-274
• /
• 1997

A large scale fire experiment was conducted through the collaboration between the Tokyo Fire Department and the National Research Institute of Fire and Disaster (NRIFD) for the purpose of studying the effectiveness of aerial fro fighting against urban fire. Ten model houses and ten collapsed model houses were arranged in an area of about $2,000\;m^2$. Water was dropped totally fourteen times by helicopters onto the model houses. In order to know influence of water drop, radiation was measured by four radiometers and four IR (Infrared) cameras, which were set around the burning area. In this report, the influence of aerial Ore fighting on fire was discussed in terms of irradiance and IR images. Data of irradiance, flame temperature and flame area showed that influence of each water drop continued only at most a minute.

• 설비공학논문집
• /
• 제16권3호
• /
• pp.250-257
• /
• 2004

Recently, the use of UVC lamps inside building air-conditioning system has been increasing in both medical and nonmedical buildings for the control of environmental microorganisms. In the present study, irradiance performance test of UVC lamp was carried out and surface sterilization effect of UV ray was investigated by using UV ray irradiation experimental chamber and pilot system. Experimental results show that the effective irradiance of UVC lamp is strongly dependent on air velocity and temperature with exception of relative huminity in air-conditioning system. An individual microbiological kill effectiveness experiment also shows that the fractional kill of two microbiological samples such as E. Coli and Legionella is roughly the same as the estimated fractional kill in the case of chamber test and pilot system test.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.965-969
• /
• 2006

This study investigated heat transfer characteristics between absorber and heat pipe used to extract heat from concentric evacuated tubular collectors. In order to experiment, T-type thermocouples are attached to a evaporator of heat pipe and absorber of inner tube. A wall temperature distribution of absorber and heat pipe were carried out by experimental method under actual various ir-radiance and outdoor conditions. As a result, As to increase an irradiance, a wall temperature of absorber and heat pipe is gradually increased. The heat pipe was required about 20min to obtain steady state operation after start up and operates stable during various irradiance conditions. And the collector efficiency was about $50{\sim}70%$ when a mass flow rate is about $1.3{\ell}/min$.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.29-36
• /
• 2020

In this study, a variable step algorithm is proposed on the basis of the perturb and observe method. The proposed algorithm can follow the maximum power point (MPP) quickly when solar irradiance changes rapidly. The proposed technique uses the voltage change characteristic at the MPP when the environment changes because of insolation or temperature. The MPP is tracked through the voltage control using a variable step method. This method determines the sudden change of solar irradiance by setting the threshold value and operates in fast tracking mode to track the MPP rapidly. When the operation point reaches the MPP, the mode switches to the variable step mode to minimize the steady state error. In addition, the output disturbance is decreased through the optimization of the control method design. The performance of the proposed MPPT algorithm is verified through simulation and experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.71-72
• /
• 2008

This paper describes a circuit based simulation model for a Photovoltaic(PV) cell in order to estimate the electrical behavior of the solar cell module with changes of environmental parameters such as shunt resistance, series resistance, temperature and irradiance. An accurate I-V model of PV module is presented based on the Shockley diode model. The general model was implemented on Matlab scrip file, and used irradiance and temperature as variables and outputs of the I-V characteristic. A typical PV module was used for the evaluation, and results was compared with reference taken directly from the manufacturer's published curves leading to excellent agrement with the theoretical prediction.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2000년도 추계 학술대회지
• /
• pp.234-235
• /
• 2000

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1233-1238
• /
• 2014

In this thesis, it is investigated the characteristics of Dye Sensitized Solar Cell (DSSC) according to variation of $TiO_2$ thickness (6, 12, 18, and $24{\mu}m$) and three distinct $TiO_2$ sintering temperatures (350, 450 and $550^{\circ}C$) by XRD, SEM, I-V and UV-Vis spectrophotometer. According to sintering temperature, $TiO_2$ was transformed into the anatase structure at $350^{\circ}C$, rutile structure at $550^{\circ}C$ and further into the two structure at $450^{\circ}C$. With increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$, respectively, the irradiance rate increased in the range of 9~26 percent and 2.80~5.10 percent. Whereas a further increase to $24{\mu}m$ and $550^{\circ}C$, the irradiance rate decrease in the range of 4~11 percent and 30~47 percent. The conversion efficiency increased in the range of 2.80~5.01 and 3.03~5.01 with increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$. By contrast, increase to $24{\mu}m$ and $550^{\circ}C$, the conversion efficiency decreased in the range of 3.31~5.01 and 2.80~3.89, respectively. The DSSC that thickness of $TiO_2$ were $18{\mu}m$ and sintered at $450^{\circ}C$ exhibited the most excellent characteristics, in which open-circuit voltage, short-circuit current, Fill Factor and conversion efficiency are 0.69 V, $11.4mA/cm^2$, 0.64 and 5.01%, respectively.

• 농업과학연구
• /
• 제49권3호
• /
• pp.561-570
• /
• 2022

This study investigated the changes in planting environment and growing conditions of 'Arisoo' apple trees under shading net treatments. Apple tree canopies were fully covered with Blue (blue color net, mesh size: 4 mm × 5 mm), Black-A (black color net, mesh size: 4 mm × 5 mm), Black-B (black color net, mesh size: 5 mm × 6 mm), and uncovered trees were used as the control. Inside the tree canopies, the illuminance was observed as 100% (85.0 Klux) in the control, but it decreased to 75% (64.3 Klux) in the Blue, 73% (63.0 Klux) in the Black-A, and 77% (65.9 Klux) in the Black-B nets, respectively. The solar irradiance was observed as 755 w·m^-3 in the control, but it was decreased to 715 w·m^-3 in the Blue, 624 w·m^-3 in the Black-A, and 647 w·m^-3 in the Black-B nets, respectively. The average daily temperature was observed to be the highest in the Black-A net (31.8℃) while it was observed to be around 30.0℃ in the control, Blue, and Black-B nets. In addition, the average fruit surface temperature was observed to be the highest (39.4℃) in the control, but it was decreased to 38.1℃ in the Blue, 37.3℃ in the Black-A, and 39.0℃ in the Black-B nets. However, the average soil temperature, the shoot growth rate, and leaf SPAD values were not different in all the treatments. Fruit sunburn disorders were the highest in the control while it was observed to be lower in the fruits from trees covered with the shading nets. However, at harvest, the fruit quality parameters were not different in all the treatments. Overall, this study suggests that the apple trees covered with the shading nets reduced the illuminance, solar irradiance, fruit surface temperature, and fruit sunburn disorders. However, the shading nets did not affect tree growth and apple fruit quality.