• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.1
• /
• pp.26-33
• /
• 2006

Recently, the rapid increase in extended-spectrum ${\beta}$-lactamase (ESBL) producing clinical isolates has become a serious problem. In this study, the epidemiologic features and molecular characteristics of ESBL among clinical isolates of Escherichia coli and Klebsiella pneumoniae, antibiotic susceptibility testing, genotype of the ESBL and patterns of chromosomal DNA from PFGE (pulsed field gel electrophoresis) were observed. A total of 53 ESBL-producing clinical isolates (30 of E. coli and 23 of Klebsiella pneumoniae) were collected from two university hospitals in the period of June to July in 2002 and 2003 respectively. The antibiotic resistance frequency of those 53 strains was tested by the disk agar diffusion method with the result that all the strains were resistant to cephalothin. To other antibiotics, the resistance rates of E. coli (30 isolates) were in order of ceftazidime (90.0%), cefotaxime and aztreonam (respectively 83.3%). Also, the resistance rates of K. pneumoniae (23 isolates) were in order of aztreonam (78.3%), ceftazidime (73.9%) and cefotaxime (65.3%). Also the sensitivity of ceftazidime-clavulanic acid were 100% in E. coli and 95.7% in K. pneumoniae. And the sensitivity of cefotaxime-clavulanic acid was 96.7% in E. coli and 91.3% in K. pneumoniae. The types of the ESBL genes were determined by using polymerase chain reaction (PCR). Among the 30 isolates of ESBL-producing E. coli, 6 (20.0%) have SHV only, 5 (16.7%) have TEM only and, 18 (60.0%) have both of TEM and SHV. Among the 23 isolates of ESBL-producing K. pneumoniae, 7 (30.4%) have SHV only, 2 (8.7%) have TEM only, and 14 (60.9%) have both of TEM and SHV. These results show that 52 strains, with only one exception, were confirmed as either TEM or SHV. The patterns of Xba I-digested chromosomal DNA of ESBL-producing E. coli and K. pneumoniae isolates were analyzed by PFGE. PFGE patterns of E. coli and K. pneumoniae were multiclonal, but many strains were grouped into a few types. Therefore, it seems that there were clonal outbreaks or possible horizontal spread. In conclusion, the TEM and SHV ${\beta}$-lactamase are most widely spread in E. coli and K. pneumoniae in Korea. As these types are usually carried by plasmids, the spread of these ${\beta}$-lactamase genes could compromise the future usefulness of third generation cephalosporins for the treatment of infections caused by E. coli and K. pneumoniae.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.720-725
• /
• 2017

M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) catalysts were prepared for the partial oxidation of methane (POM) to syngas. The catalysts were characterized by BET, TEM, and XPS. The BET-specific surface area and average pore size for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) were 538.8, 504.3, and $447.3m^2/g$ and 6.4, 6.8, and 7.1 nm, respectively. TEM results showed that the mesoporous hexagonol structure was formed for SBA-15, while the homogeneous dispersion of Ni and Ce particles on the surface was formed for Ce(10)-Ni(5)/SBA-15 caused by the confinment effect of SBA-15. XPS data confirmed that $Ce^{4+}$ and $Ce^{3+}$ on the surface catalyst have two oxidation states due to the lattice oxygen species ($O^{2-}$, $O^-$). The yields of POM to syngas over Ce(10)-Ni(5)/SBA-15 were 52.9% $H_2$ and 21.7% CO at 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$, and these values were kept constant even after 75 h on streams. The same tendency of syngas yields was observed for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm). These results confirm that the redox reaction of promoters including Ce, Nd, and Sm enhanced the stability and yield of catalysts.

• Korean Journal of Materials Research
• /
• v.28 no.10
• /
• pp.595-600
• /
• 2018

This study investigates the microstructural properties of CoCrFeMnNi high entropy alloy (HEA) oxynitride thin film. The HEA oxynitride thin film is grown by the magnetron sputtering method using nitrogen and oxygen gases. The grown CoCrFeMnNi HEA film shows a microstructure with nanocrystalline regions of 5~20 nm in the amorphous region, which is confirmed by high-resolution transmission electron microscopy (HR-TEM). From the TEM electron diffraction pattern analysis crystal structure is determined to be a face centered cubic (FCC) structure with a lattice constant of 0.491 nm, which is larger than that of CoCrFeMnNi HEA. The HEA oxynitride film shows a single phase in which constituting elements are distributed homogeneously as confirmed by element mapping using a Cs-corrected scanning TEM (STEM). Mechanical properties of the CoCrFeMnNi HEA oxynitride thin film are addressed by a nano indentation method, and a hardness of 8.13 GPa and a Young's modulus of 157.3 GPa are obtained. The observed high hardness value is thought to be the result of hardening due to the nanocrystalline microstructure.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2001

In order to measure steel corrosion in mortar by a transient electro-magnetic (TEM) Method, the development of the sensors have been studied. The sensors were made of enamelled wire with diameter of 0.25mm and Acril. The sensor configuration was used as a coincident loop type. The secondary electro motive force(EMF) was measured with SIROTEM III. The accelerator was equipped with the SIROTEM III. The accelerator permits the transmitter to turn off approximately 10~15 times faster than normal. The high resolution time series used for very shallow or high resistivity investigation was selected. The steels were embedded in mortar which were made from sand : cement : water ratio of 2 : 1: 0.5. The mortar specimen was 50cm long, 20cm wide and 10cm thick. To investigate steel corrosion in mortar, the sensors used were with 2$\times$2$cm^2$(3, 6, 9$\Omega$), 3$\times$3$cm^2$(3, 6, 9$\Omega$) and 6$\times$6$cm^2$(3, 6, 9$\Omega$). The obtained result obtained showed that the sensor 8(6$\times$6$cm^2$, 6$\Omega$) was the proper sensor for the measurement of steel corrosion in mortar.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1407-1411
• /
• 2008

In material processing, a laser system with optimal laser parameters has been considered to be significant. Especially, the laser scribing technology is thought to be very important for fabricating DSSC(Dye sensitized solar eel!) modules with good quality. Moreover, the $TEM_{00}$ mode laser beam is the most dominant factor to decide the IPCE(Incident photon to current conversion efficiency) characteristics. In order to get the $TEM_{00}$ mode, a pin-hole is inserted within a simple pulsed Nd:YAG laser resonator. And the spatial field distribution is measured by using three size pin-hole diameters of 2.0, 6.0mm respectively. At that moment, each case has the same laser beam energy by adjusting the discharge voltage and pps(pulse per second). From those results, it is known that the pin-hole size of 2.0mm has the perfect $TEM_{00}$ mode. In addition, at the charging voltage of 1000V, 10pps and the feeding speed of 1.11mm/sec, the SEM photo of FTO(Fluorine-doped tin oxide) thin film layers shows the best scribing trace.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.4
• /
• pp.266-270
• /
• 2003

The $LiN_{0.8}Co_{0.2}O_2$ has shown outstanding electrochemical properties. The microstructure of $LiN_{0.8}Co_{0.2}O_2$ cathode was investigated by using TEM (transmission electron microscopy) and X-ray diffraction techniques. The $LiN_{0.8}Co_{0.2}O_2$ was produced by sol-gel method to synthesize fine particles less than $1{\mu}m$ in the average diameter. In this study, emphasis was given to the examination and interpretation of the microstructural change during charge-discharge cycling experiments, which appeared to be one of the main causes of early degradation of rechargeable batteries. Results showed that the $1{\mu}m$ cathode produced by sol-gel method had high reversible capacity and excellent cycling stability due to its homogeneous distribution of Ni and Co cations on u atomic scale. In particular, the $1{\mu}m$ cathode did not show severe strain induced structural defects or cubic spinel disordering during cycling experiments, which had been observed in the conventional $LiCoO_2$ cathode. The $LiNi_{0.8}Co_{0.2-x}M_x[M=Al]$ compounds show good reversibility but low discharge capacity.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.277-283
• /
• 2001

The emergence of extended spectrum beta-lactamase(ESBL) producing bacteria is causing very serious problems in Korea. Although there have been many reports about these bacteria isolated from patients and clinical specimens, there is no report of ESBL-producing organisms isolated from natural evironment in Korea. This is the first study on the ESBL producing bacteria out of the medical system in Korea. Twenty-six ESBL producing bacteria were isolated only from sewerage plant drain water at Kwang-an beach among the sampling collected sites including snakehead fish plants in Myungi, Aquaculture Engineering Lab. in Pukyong National University and two public-bathrooms in Pusan, Korea. ESBL producing bacteria were identified by double-disk synergy test, conjugation, isoelectric focusing values and PCR. The species of ESBL producing bacteria were Enterobacter cloacae(4 strains), E. sakazakii(8 strains), Klebsiella pneumoniae subsp. pneumoniae(8 strains) and K. pneumoniae subsp. ozaenae(6 strains). TEM and SHV specific PCR products were detected from all the ESBL strains produced TEM+SHV products on the PCR plates. The pI values of ESBL produced by Klebsiella pneumoniae subsp. pneumoniae, K. pneumoniae subsp. ozaenae, Enterobacter cloacae, and E. sakazakii were 5.9, 5.9+5.4; 5.9, $5.9+5.4;{\ge}8.5$, 8.0+5.4, and 8.0+5.4, respectively on the IEF. Seven strains of the isolates were transfered their genes to E. coli RG488 $Rif^r$ by conjugation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.83-87
• /
• 2003

$(Nd/Y)_{1.8}Ba_{}2.4Cu_{3.4}O_{7-x}$high $T_c$ superconductor was directionally grown by floating Bone melt growth process with a large temperature gradient in air. Cylindrical green rods of (Nd/Y)1.8 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mold. Microstructures were observed by SEM and TEM and superconducting properties were measured by a SQUID magnetometer. Nonsuperconducting $(Nd/Y)_2BaCuO_5$ inclusions were uniformly distributed within the superconducting $(Nd/Y)Ba_2Cu_3O_x$ matrix. The directionally melt-textured (Nd/Y) 1.8 superconductor showed an onset Tc $\geq$ 90 K and a sharp superconducting transition.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.921-926
• /
• 1994

The characteristics of gate oxide significantly depend on the last chemical solution used in cleaning process. The standard RCA, HF-last, SC1-last, and HF-only processes are the pre-gate oxide cleaning processes utilized in this experiment. Cleaning process was followed by thermal oxidation in oxidation furnace at $900^{\circ}C$. A 100$\AA$ gate oxide was grown and characterized with using lifetime detector, VPD AAS, SIMS, TEM, and AFM. The results of HF-last and HF-only were shown to be very effective to remove the metallic impurities. And these two splits also showed long minority carrier lifetimes. The surface and interface morphologies of the oxide were examined with AFM and TEM. The rough surface morphologies were observed with the cleaning splits containing the SC1 solution. The smooth surface and interface was observed with the HF-only cleaning process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.256-259
• /
• 2004

[ $V_2O_5$ ] 나노선의 구조 분석을 위해 STM(Scanning Tunneling Microscopy)과 TEM(Transmission Electron Microscopy)을 이용하여 단일 $V_2O_5$ 나노선의 이미지를 얻었다. $V_2O_5$ 나노선은 상온에서 ammonium metavanadate$(NH_4VO_3)$와 양이온 교환수지$(DOWEX50{\times}8-100)$를 2차 증류수에 섞어 합성하였다. STM 시료는 3-APS(3-aminopropyltriethoxysilane)를 전 처리한 실리콘 기판에 $V_2O_5$ 나노선을 올려 만들었고, TEM 시료는 200 mesh/copper 그리드에 침전시켜 준비하였다. STM과 TEM의 결과로부터 $V_2O_5$ 나노선의 기하학적 단면이 $1.5nm{\times}10nm$에 거의 근사하는 것을 확인하였으며 두 이미지의 비교를 통해 $V_2O_5$ 나노선의 표면상태에 대해 논의하였다.