• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.271-274
• /
• 2005

We investigated the crystalline and electrical properties of ZnO thin films for transparent electrode as a function of the oxygen pressures during the deposition. The ZnO thin films were deposited on a flexible teflon substrates by the pulsed laser deposition. From the X-ray diffraction, ZnO films showed c axis oriented ZnO(0002) crystal structure. The FWHM (full width at half maximum) values decreased from $0.51^{\circ}\;to\;0.34^{\circ}$ as the oxygen pressure increased from 0.1 mTorr to 10.0 mTorr showing the improvement of crystallinity. The resistivity and hall mobility of ZnO film deposited at the oxgen pressure of 0.1 mTorr at $200^{\circ}C$ was about $5\times10^{-4}\Omega{\cdot}cm\;and\;20cm^2/V{\cdot}s$, respectively. The optical transmittance of the ZnO films on flexible teflon substrate was found to be above $85\%$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.344-349
• /
• 2015

A new information society of late has arrived by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market. Also, the requirements for the larger television sets such as fast response speed, low-cost electric power, wider visual angle display are sufficiently satisfied. The currently most widely studied display material, the Organic Light-emitting Diodes(OLEDs) overwhelms the Liquid Crystal Display(LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency and excellent durability and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy produce can be manufactured in various shapes such as a point light source, a linear light source, a surface light source. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this paper, OLEDs device was produced by changing thickness of Teflon-AF of hole injection material layer. And as for the electrical properties, the four layer device of ITO/TPD/$Alq_3$/BCP/LiF/Al and the five layer device of ITO/Teflon AF/TPD/$Alq_3$/BCP/Lif/Al were studied experimentally.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.23-29
• /
• 2022

To detect harmful chemical substances in seawater, we fabricated a prototype sensor and evaluated its performance. The prototype sensor consisted of a detector, housing, and driving circuit. We built the detector by printing an Indium-Tin-Oxide (ITO) nanoparticle film on a flexible substrate, and it had two detection parts for simultaneous detection of temperature and HNS concentration. The housing connected the detector and the driving circuit and was made of Teflon material to prevent chemical reactions that may affect sensor performance. The driving circuit supplied electric power, and display measured data using a bridge circuit and an Arduino board. We evaluated the sensor performances such as response (ΔR), the limit of detection (LOD), response time, and errors to confirm the specification.