• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.451-458
• /
• 2004

No comprebensive forage quality of annual legumes harvested and cured in spring has been conducted in Korea. Therefore, this experiment was carried out to gain information on the quality of crimson clover (Trifolium incarnatum L.), bolta baIansa clover(Trifolium ba/anansae L.), and persian c1over(Trifolium resupinatum L.) during field curing in spring. The dry matter content of crimson clover at harvest was 24.7%, while bolta balansa and persian clovers had 20.4 and 18.8%, respectively. The moisture content of persian clover was low at the final curing day. But All species took 4 days to reach moisture content under 20%Tedding frequency did not affect moisture content, but consisten trends were also observed during the field curing. Persian clover tended to show a higher leaf-stem ratio than crimson and bolta balansa clovers on dry matter basis. Crude protein of persian clover(19.5%) was higher than other legumes. The percentage of erode protein was decreased from 17.8 to 16.5% as tedding frequency often did. Neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of persian clover were lower than those of other legumes. From the comparison among tedding frequency, NDF and ADF contents of three times were higher than those of one and two times. Relative feed value(RFV) of persian clover hay was the highest(178) and classified as Grade Prime in forage quality standard. Crimson and bolta balansa clovers in the RFV were also high quality as Grade 1 in forage quality standard. The RFV of legume hay was decreased from 150 to 140 as tedding frequency often did Results of the experiment indicate that hay quality of persian clover was higher than other clovers. And this is due to high leaf and stem content, hollow stem and late maturity stage. Then tedding frequency in annual legume can be teded by two times for quality.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.427-436
• /
• 2001

The effects of storage form (paddy and milled rice) and storage period (1, 2, and 3 years) of rice at low temperature $(4^{\circ}C)$ on physicochemical properties of milled and cooked rice and sensory characteristics of cooked rice were investigated. The proximate compositions except moisture content of rice decreased as the storage period increased. Water binding capacity, solubility and swelling power of rice flour decreased with the extended storage period. In the amylogram, the initial pasting temperature, paste viscosity and breakdown of paddy rice flour slurry decreased after 2 years of storage. Moisture content of cooked rice increased while the amount of water evaporated during cooking decreased. These trends were obvious with the longer storage period. Lightness and yellowness of cooked rice were greatly changed after 3 years of storage, regardless of storage form. Texture profile analysis of cooked rice by Texture Analyzer revealed that hardness, fracturability, gumminess were gradually increased while adhesiveness decreased as the storage period of rice increased. A trained panel found that color intensity, intactness of grains, rancid flavor, rice bran flavor, wet cardboard flavor, hardness and chewiness of cooked rice increased with the longer storage period. However, glossiness, transparency, plumpness, puffed corn flavor, dairy flavor, boiled egg white flavor, sweet taste, adhesiveness to lips, smoothness and inner moisture decreased with the extended storage period up to 3 years. Instrumental hardness was highly correlated with sensory hardness.

• Journal of Korea Water Resources Association
• /
• v.50 no.7
• /
• pp.503-511
• /
• 2017

In order to estimate the demand for water resources planning and operation, methodology for determining the size of water supply facilities has been mainly applied to agricultural water, unlike living and industrial water, which reflects actual usage trends. This inevitably leads to an overestimation of agricultural water and can lead to an imbalance in the supply and demand of each use in terms of the total water resources plan. In this study, the difference of approaches of concept of net consumption was examined in comparison with the existing methodology and the characteristics of agricultural water demand were analyzed by applying it to whole Jeju Island. SWAT model was applied to estimate the amount of evapotranspiration, which is a key factor in estimating demand, and watershed modeling was performed to reflect geographical features, weather, runoff and water use characteristics of Jeju Island. For the past period (1992~2013), demand of Jeju Island as a whole was analyzed as 427 mm per year, and it showed a relatively high demand around the eastern and western coastal regions. Annual demand and seasonal variation characteristics of 10 river basins with watershed area of $30km^2$ or more were also analyzed. In addition, by applying the cultivated area of each crop in 2020 in the future, it is estimated that the demand corresponding to the 10-year frequency drought is 54% of the amount demanded in the previous research. This is due to the difference in approach depending on the purpose of the demand calculation. From the viewpoint of water resource management and operation, additional demand is expected as much as the net consumption. However, from the actual supply perspective, it can be judged that a facility plan that meets the existing demand amount is necessary. In order to utilize the methodologies and results presented in this study in practice, it is necessary to make a reasonable discussion in terms of policy and institutional as well as engineering verification.

• Asia pacific journal of information systems
• /
• v.17 no.4
• /
• pp.207-228
• /
• 2007

Measuring Information Technology(IT) organizations' activities have been limited to mainly measure financial indicators for a long time. However, according to the multifarious functions of Information System, a number of researches have been done for the new trends on measurement methodologies that come with financial measurement as well as new measurement methods. Especially, the researches on IT Balanced Scorecard(BSC), concept from BSC measuring IT activities have been done as well in recent years. BSC provides more advantages than only integration of non-financial measures in a performance measurement system. The core of BSC rests on the cause-and-effect relationships between measures to allow prediction of value chain performance measures to allow prediction of value chain performance measures, communication, and realization of the corporate strategy and incentive controlled actions. More recently, BSC proponents have focused on the need to tie measures together into a causal chain of performance, and to test the validity of these hypothesized effects to guide the development of strategy. Kaplan and Norton[2001] argue that one of the primary benefits of the balanced scorecard is its use in gauging the success of strategy. Norreklit[2000] insist that the cause-and-effect chain is central to the balanced scorecard. The cause-and-effect chain is also central to the IT BSC. However, prior researches on relationship between information system and enterprise strategies as well as connection between various IT performance measurement indicators are not so much studied. Ittner et al.[2003] report that 77% of all surveyed companies with an implemented BSC place no or only little interest on soundly modeled cause-and-effect relationships despite of the importance of cause-and-effect chains as an integral part of BSC. This shortcoming can be explained with one theoretical and one practical reason[Blumenberg and Hinz, 2006]. From a theoretical point of view, causalities within the BSC method and their application are only vaguely described by Kaplan and Norton. From a practical consideration, modeling corporate causalities is a complex task due to tedious data acquisition and following reliability maintenance. However, cause-and effect relationships are an essential part of BSCs because they differentiate performance measurement systems like BSCs from simple key performance indicator(KPI) lists. KPI lists present an ad-hoc collection of measures to managers but do not allow for a comprehensive view on corporate performance. Instead, performance measurement system like BSCs tries to model the relationships of the underlying value chain in cause-and-effect relationships. Therefore, to overcome the deficiencies of causal modeling in IT BSC, sound and robust causal modeling approaches are required in theory as well as in practice for offering a solution. The propose of this study is to suggest critical success factors(CSFs) and KPIs for measuring performance for IT organizations and empirically validate the casual relationships between those CSFs. For this purpose, we define four perspectives of BSC for IT organizations according to Van Grembergen's study[2000] as follows. The Future Orientation perspective represents the human and technology resources needed by IT to deliver its services. The Operational Excellence perspective represents the IT processes employed to develop and deliver the applications. The User Orientation perspective represents the user evaluation of IT. The Business Contribution perspective captures the business value of the IT investments. Each of these perspectives has to be translated into corresponding metrics and measures that assess the current situations. This study suggests 12 CSFs for IT BSC based on the previous IT BSC's studies and COBIT 4.1. These CSFs consist of 51 KPIs. We defines the cause-and-effect relationships among BSC CSFs for IT Organizations as follows. The Future Orientation perspective will have positive effects on the Operational Excellence perspective. Then the Operational Excellence perspective will have positive effects on the User Orientation perspective. Finally, the User Orientation perspective will have positive effects on the Business Contribution perspective. This research tests the validity of these hypothesized casual effects and the sub-hypothesized causal relationships. For the purpose, we used the Partial Least Squares approach to Structural Equation Modeling(or PLS Path Modeling) for analyzing multiple IT BSC CSFs. The PLS path modeling has special abilities that make it more appropriate than other techniques, such as multiple regression and LISREL, when analyzing small sample sizes. Recently the use of PLS path modeling has been gaining interests and use among IS researchers in recent years because of its ability to model latent constructs under conditions of nonormality and with small to medium sample sizes(Chin et al., 2003). The empirical results of our study using PLS path modeling show that the casual effects in IT BSC significantly exist partially in our hypotheses.

• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.43-53
• /
• 2011

The possibility of making Cheongukjang by the use of soy-powder and pill type re-made from soy-powder was investigated. Some of experimental results obtained are summarized as follows; 1. Regardless of three different types for the source material of Cheonggukjang, soybean seed, soy-power, and pill, the dry weight of fermented Cheonggukjang showed continuously decreasing trends along with the time of fermentation applied. 2. In all type of source materials, the length of viscous substance during fermentation was increased along with the time of fermentation, and the rate of elongation was much reduced after 48hr of fermentation. Out of four soybean varieties tested, Taekwangkong produced longest viscous substance fermented in the type of soybean seed. No viscous substance was formed when the depth of soy-powder in the fermentation box was shallow, one centimeter. 3. Not much difference was observed in the number of microbes, Bacillus licheniformis B1, in all soybean varieties. The number was proportionally increased in the type of powder but it increased rapidly from 12 hour to 24 hour with low rate of increase thereafter in the pill type. 4. Along with the time of fermentation in all types, the color of Cheonggukjang changed from yellow to dull. At the same time, the tone of color and chroma changed into reddish and yellow, respectively. 5. Along with the time of fermentation in all types, pH of Cheonggukjang changed in alkali. 6. Along with the time of fermentation, the content of isoflavone in Cheonggukjang increased by 48hr but decreased thereafter. 7. In general, the quality of Cheonggukjang fermented in types of soy-powder and pill re-made from soy-powder was lower than that of soybean seed. More study is seemed to be needed to produce high quality Cheonggukjang by the use of soy-power.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.529-536
• /
• 2003

A total of 72 finishing pigs(L${\times}$Y${\times}$D; 80kg of initial body weight) were employed for 5 weeks to investigate the effects of feeding mushroom substrate waste(MSW) treated with pleurotus ostreatus and probiotics on productivity, carcass traits, nutrient digestibility and emissions of harmful gases and malodor in manure. Treatments were Control(C: basal diet), T1(3% MSW) and T2(3% MSW+ 0.1% probiotics). Average daily gain(ADG) was lower(p<0.05) in pigs fed a T1 diet than those fed a C diet, however, there was no difference in ADG of pigs fed diets between C and T2. Similar trends were found in feed/gain(F/G) among treatments, though feed intake was not different. No differences were found in back fat thickness among treatments, but carcass dressing percentage was significantly(p<0.05) improved in pigs fed a T2 diet compared to C or T1 diets. Nutrient digestibilities including dry matter, crude protein, energy and crude fiber were lower(p<0.05) in T1 than C or T2. $NH_3$ and $H_2S$ gas emissions were reduced(p<0.05) or not produced in pig manure from T2 as compared to C or T1. In conclusion, the present result shows that feeding MSW with probiotics is desirable for finishing pigs in terms of productivity, carcass traits and nutrient digestibility. It also appears that the emission of harmful gases and malodor in manure can be reduced by the inclusion of probiotics in the diet.

• The Korean Journal of Pesticide Science
• /
• v.6 no.1
• /
• pp.16-24
• /
• 2002

Research trends in the measurement of foliar uptake of pesticides and the recently proposed action mechanism of the surfactant-induced uptake of pesticides were reviewed with the related reports and studies. Major techniques used in those fields are bioassay, radiotracer techniques with leaves or cuticular membrane. Recently, a new method using Congo Red as a tracer was proposed. The limiting factor in the pesticides uptake into leaves is the waxy layer which consists of the epicuticular and cuticular wax. Physico-chemical parameters such as molar volume, water solubility and partition coefficient of pesticides have limited influences on the pesticide uptake into leaves. Polydisperse ethoxylated fatty alcohol surfactants are well known as the good activator for many pesticides. It is now generally agreed that uptake activation is not related to the intrinsic surface active properties of surfactants such as surface activity, solvent property, humectancy and critical micelle concentration. Recent studies using ESR-spectroscopy revealed that the surfactants have an unspecific plasticising effect on the molecular structure of the wax and cuticular matrix, leading to increased mobilities of pesticides. Penetration of surfactants into waxy layer altered the pesticide mobility in wax and the partition coefficient of pesticide, and then the pesticides penetration into leaves was enhanced temporally. The enhancing effect of surfactant could be significantly different depending on the carbon number of aliphatic moiety and the number of ethoxy group in polyoxyethylene chain of surfactants. It is suggested that the rate of penetration of surfactants should have a significant relationship with the rate of penetration of pesticides.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Korean Journal of Environmental Biology
• /
• v.26 no.3
• /
• pp.159-169
• /
• 2008

This study was aimed to classify the intertidal macrozoobenthic community status after 2 years of Sea Prince oil spill, and oil spill effects along oil spreading track from heavily impacted to unaffected reference site. Field sampling was initiated in late February and continued through November 1998 seasonally, after 2.5 years of oil spill. 7 rocky sampling sites were selected among coastal regions coated and/or affected by the Sea Prince spilled oil. Identified species was 158 species, 65 family, 24 order, 9 class, 5 phylum. Mollusca was the dominant faunal group comprising 100 species (63.3%), and followed by 38 species of Crustacea (24.1%), 12 species of Echinodermata (7.6%), 5 species of Porifera (3.2%), and 3 species of Cnidaria (1.9%). On Dugpo of Sori Island, the fewest species was collected from 28 species to 35 species seasonally among sampling stations. But far away Dugpo toward Gamak Bay, the number of species increased, collecting the maximum on Sohwoenggan Island. At the wreck site of Sori Island, especially the species number of attached animals such as poriferans and anthozoans was very low compared to another site. The density and biomass on the higher tidal zone increased toward the low affected sites, but biomass on middle tidal zone decreased. The invertebrate biomass of study area was dependent on the sessile animals. The major dominant species were small-sized barnacles, Chthmallus challengeri, periwinkles, Littorina brevicula, mussels, Septifer virgatus, and so on. The biomass of C. challengeri and L. brevicula on the higher tidal zone was highest in the wreck site of Sori Island and decreased further and further. However, mussels on the middle tidal zone showed the inverse trends because of the larger individual size of mussel inhabited in Sori Island than those of another sites. As a result of community analysis, the effect of oil spill was not found distinctly. Several ecological indices and cluster analysis did not show the meaningful variation with oil track despite of the conspicuous differences among tidal heights. These indicate that the macrozoobenthic community level of oil spreaded zone recovered in some degree after the Sea Prince oil spill accident, but population or individual levels of dominant sessile animals took more recovery times.