• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.291-300
• /
• 2020

The cartridges used for illuminating a desired point or area are virtually limited in tests and evaluations because of limitations, such as noise during launch, the possibility of fires caused by illuminant charge, and the annual testable quantity. Therefore, to solve these problems, a ground fixed test, which replaces the firing test, or an evaluation method to perform limited tests, can be applied more efficiently. In this paper, the results of an 81mm illuminating cartridge, KM series performed in 2019 were analyzed comprehensively to identify the trends in reliability and quality characteristics and to estimate the shelf life. The shelf life was estimated to be at least 10 years based on the time when the lower confidence level reached 80% at a confidence level of 90%. Considering only major defects, the shelf life can be estimated to be approximately 23 years. On the other hand, the shelf life was estimated to be approximately 11 to 15 years and 25 to 28 years according to the effective illuminating time. Finally, an assessment plan of illuminating cartridges for the mortars was also presented as an improvement plan for an assessment method in the future.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.21-29
• /
• 2016

Remote Sensing (RS) is a technique to obtain necessary information in a non-contact and non-destructive method by using various sensors on the surface, water or atmospheric phenomena. These techniques combine elements such as sensors, and platform and information communication technology (ICT) for mounting the sensor. ICT has contributed significantly to the success of smart agriculture through quantification and measurement of environmental factors and information such as weather, crop and soil management to distribution and consumption stage, as well as the production stage by the cloud computer. Remote sensing techniques, including non-destructive non-contact bioimaging (remote imaging) is required to measure the plant function. In addition, bioimaging study in plant science is performed at the gene, cellular and individual plant level. Recently, bioimaging technology is considered the latest phenomics that identifies the relationship between the genotype and environment for distinguishing phenotypes. In this review, trends in remote sensing in plants, plants diagnostics and response to environment and status of plants phonemics research were presented.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.289-296
• /
• 2011

Swine industry in Korea plays an important role in providing the meat for domestic consumption, and the number of pigs in Korea was about 9.72 million heads as of June, 2010. Meat quality is used to describe any traits which impact the consumer acceptability of fresh meat products. Meat color, firmness, water holding capacity, ultimate muscle $pH_{24h}$ (measured 24 hours post-mortem), shear force, and intramuscular fat percentage (IMF) are generally accepted as important indicators of meat quality and ultimately, consumer acceptance of fresh pork. The objective of this study was to estimate genetic parameters for meat quality traits in Berkshire pigs. The heritability estimates for muscle $pH_{24h}$, lightness (CIE $L^*$), NPPC marbling were 0.61, 0.56 and 0.57, respectively, The heritability estimates for drip loss, cooking loss, shear force were 0.51, 0.66 and 0.56, respectively. The phenotypic correlations between $pH_{24h}$ and lightness (CIE $L^*$), drip loss, cooking loss were negative, ranging from -.45 ~ -.13. The genetic correlations between muscle $pH_{24h}$ and lightness (CIE $L^*$), drip loss were negative, ranging from -.35 ~ -.32. Genetic parameters obtained herein indicate that genetic improvement of muscle $pH_{24h}$ is not related to the NPPC marbling of meat, but rather to improved lightness(CIE $L^*$) and drip loss. Genetic trends of meat quality traits showed increased muscle $pH_{24h}$ and decreased cooking loss and drip loss.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.139-146
• /
• 1999

The purpose of this study is to analyze the efficiency and working conditions of the patternwork departments by surveying the apparel manufacturing companies sampled in Seoul for their organization, working enviornment and technology of their patternwork departments, and thereby, find the ways to promote the functions of the patternwork department. The results of this study can be summarized as follows; 1. As a result of analyzing the working environment of patternwork departments, it was found that the problems counted by most of the pattern workers were lack of workforce, unhygienic or unpleasant workplaces. 2. As a consequence of analyzing the sample production in terms of tacking methods and times, They rarely tacked the white cotton. Such an omission of tacking procedure may serve to save time, but if a sewing error occurs, the working time would rather be longer due to the defects of pattern to be remedied. 3. As a result of reviewing the general patternwork conditions, it was found that the patterns were still worked out in two dimensions. On the other hand, more than 60% of the pattern workers were applying to their patternworks the styles which they had learned from their seniors. Few patterns are being developed in conformity to apparel trends or body shape changes. 4. As a consequence of examining the problems involving the production of patternsl, the problems involved primarily the patterns incised off no-dart pattern and body structure, and in light of items, involved mainly the trousers and in light of material, involved much the stretch or velvet. Moreover, it is deemed necessary to establish a special institute devoted to a systematic development of pattern technology. 5. Most of the CAD patternworks are used not for pattern designing but for grading and marking works, which suggests that pattern workers need to be educated on this new technology for more diverse and precise patternworks. 6. Lastly, as a result of examining the conditions of patternwork departments and their relevant works, most of the pattern workers were found to be subject to irregular and excessive workload, having little time to produce good patterns. This finding suggests that it is necessary to mandate the pattern workers to more involve the commodity planning.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.453-466
• /
• 2020

As the demand for eco-friendly energy increases to overcome the energy shortage and environmental pollution crisis, hydrogen economy has been proposed as a potential solution. Accordingly, an economical and efficient hydrogen production is considered to be an essential industrial process. Research on applying hydrogen separation membranes for H₂/CO₂ separation to the production of highly concentrated hydrogen by purifying H₂ and capturing CO₂ simultaneously from synthetic gas produced by gasification is in progress nowadays. In high temperature environments, the membrane separation process using glassy polymeric membrane with H₂ selectivity has the potential for CO₂ capture performance, and is an energy and cost effective system since polybenzimicazole (PBI)-based separators show excellent chemical and mechanical stability under high-temperature operation conditions. Thus, the development of high-performance PBI hydrogen separators has been rapidly progressing in recent years. This overview focuses on the recent developments of PBI-based membranes including structure modified, cross-linked, blended and carbonized membranes for applications to the industrial hydrogen separation process.

• Clean Technology
• /
• v.23 no.2
• /
• pp.121-132
• /
• 2017

The increase of greenhouse gases and the concern of global warming instigate the development and spread of renewable energy and hydrogen is considered one of the clean energy sources. Hydrogen is one of the most elements in the earth and exist in the form of fossil fuel, biomass and water. In order to use hydrogen for a clean energy source, the hydrogen production method should be eco-friendly and economic as well. There are two different hydrogen production methods: conventional thermal method using fossil fuel and renewable method using biomass and water. Steam reforming, autothermal reforming, partial oxidation, and gasification (using solid fuel) have been considered for hydrogen production from fossil fuel. When using fossil fuel, carbon dioxide should be separated from hydrogen and captured to be accepted as a clean energy. The amount of hydrogen from biomass is insignificant. In order to occupy noticeable portion in hydrogen industries, biomass conversion, especially, biological method should be sufficiently improved in a process efficiency and a microorganism cultivation. Electrolysis is a mature technology and hydrogen from water is considered the most eco-friendly method in terms of clean energy when the electric power is from renewable sources such as photovoltaic cell, solar heat, and wind power etc.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.645-650
• /
• 2001

A study was carried out to establish the detection method for irradiated cereals. Cereals were ground and irradiated at 2.5, 5.0, 7.5, 10, 15 kGy using a $Co^{60}$ irradiator. The viscosities decreased in all samples by increasing irradiation dose. The viscosity of the Panicum millaceum (Korean) and Andropogon sorghum (Korean) paste dropped from $143.38{\pm}0.44$ and $35.92{\pm}1.90$ in the control to $6.60{\pm}1.16$ and $3.86{\pm}0.32$, respectively, in the samples irradiated at 15 kGy. These trends were similar to samples from china. Regression equation and coefficients of viscosity of Panicum millaceum (Korean and China) and Andropogon sorghum (Korean and China) were 0.80 (y=-27.789x＋150.17), 0.98 (y=-3.367x＋88.93), 0.84 (y=-6.0466x＋35.49) and 0.84 (y=-13.346x＋101.67) at 50 rpm. All samples resulted in a decrease in specific parameter by increasing rpm after irradiation. Parameter values showed dose-dependent relationship between unirradiated and irradiated samples and indicated that all values of unirradiated samples were higher than the irradiated ones. These results suggest that the detection of irradiated cereals at various doses using viscometric methods is possible.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.395-399
• /
• 1997

Meat model emulsions ware prepared with salt-soluble protein and soybean oil. Effects of water-soluble protein (WSP) on the meat model emulsion treated with/without BHT during 8 day storage $5^{\circ}C$ under both dark and light illumination were studied by measuring POV and TBA. An emulsion without BHA and WSP was used as a control. Under light storage, there was no significant difference in peroxide values between the control and the sample treated with BHA except the 2nd day of storage. However, TBA values of the sample treated with BHA were significantly (p<0.05) lower than those of control except the 4th day of storage. TBA and POV of the samples treated with WSP and WSP + BHA were higher than control after 4th day of storage under light. That is, water soluble protein, which was composed mainly of myoglobin, increased lipid oxidation under light storage. The similar trends were also shown in the samples stored under dark. These results suggested that acceleration of lipid oxidation of the meat model emulsions by water soluble protein (WSP) under both light and dark might not be due to the singlet oxygen formation, but due to superoxide anion formed.

• Journal of Arbitration Studies
• /
• v.13 no.2
• /
• pp.547-584
• /
• 2004

Information technology(IT) is changing rapidly based on growth of internet and computer businesses. Therefore, computer programs and softwares are distributed to computer users promptly for their productivity increase and efficient work. So, in the distribution, the softwares will be copied or released through network or other methods which are not authorized by the program owners. In that case, copyright dispute is incurred and various issues are come out due to infringement of the software copyright. Thus, the purpose of this study is to research infringement cases of the software copyright and how to settle the dispute which is related with software programs. To achieve the purpose of this study, this research consisted of 5 chapters. At chapter 1 introduction, it mentioned necessity of this study, purpose and how to research this study, and at chapter 2 dispute factors indicated and summarized for technical resolution. At chapter 3, infringement cases of software copyright analyzed and studied upon intellectual property(IP) related laws. And methods of dispute settlement discussed and suggested to chapter 4 for copyright and intellectual property protection. Also, it emphasized importance of arbitration to resolve the issues timely and avoid time and economical consumption. Of course, arbitration law has to be matched with the trend of technology development for effective settlement. At chapter 5 conclusion, it summarized this research and suggested further research for empirical test of economic value of the software copyright upon the aspect of business, law, and engineering. In this study, the results are 1) IP related laws have to be enacted or revised to meet technical changes for the protection of software copyright on time. The enactment or the revision of law takes a long time, therefore, to deal the dispute effectively, 2) arbitration law has to be utilized efficiently in order to resolve issues and settle the dispute promptly. It is suggested the dispute settlement through arbitration to save time and economic matters for legislation, and to harmony with the technology trends. 3) Recognition of software copyright is to be improved by users and enterprises for development of software related industries and intellectual property protection. In conclusion, the protection of software copyright is important than any other things in the field of IT because of the development of industry and intellectual property related laws. The development is for areas of business, law and engineering, so research and practices are to be combined with the areas so that it could resolve the dispute settlement and IP protection effectively.

• Journal of Digital Convergence
• /
• v.18 no.1
• /
• pp.137-146
• /
• 2020

NLP means the technology that mechanically analyzes a language spoken by a human and makes it into a form that can be understood by a computer. This is important because it is a core technology for communication between humans and devices, which is the basis of artificial intelligence. In this paper, I analyzed patent information of US and Korea in order to identify technical trends related to NLP, especially semantic analysis. and the purpose of this study is to provide meaningful information for future research on NLP. In conclusion, the number of Korea patents is 7.9% compared to the USA and the different frequencies of the major keywords were found to differ from country to country in technical direction. In addition, the upward or downward keywords are twice as many in the U.S. as in Korea, and reflect the trend of the times relatively more. Based on these results, in future study, I will analysis how upward trending keywords are described in actual patents for concrete technology prediction.