• 벤처창업연구
• /
• 제15권1호
• /
• pp.125-141
• /
• 2020

본 연구는 창업자의 전략적 지향성과 사회적 자본이 창업기업의 성과에 미치는 영향을 분석하였다. 전략적 지향성은 기업가적 지향성, 시장 지향성, 기술 지향성으로 구분하고 사회적 자본은 외부 네트워크의 지원과 창업팀에 대한 신뢰 및 응집력으로 정의하여 그 효과를 실증하였다. 또 사회적 자본이 전략적 지향성의 효과를 조절하는 조절효과가 있는지도 살펴보았다. 설립 5년 미만의 79개 스타트업을 대상으로한 실증분석에서, 기술 지향성만이 창업성과에 유의한 영향을 미치는 것으로 나타났다. 사회적 자본은 모두 창업성과에 유의한 효과를 미치는 것으로 나타났으며 그 조절효과는 부분적으로 검증되었다. 본 연구결과는 증거 중심의 스타트업 지원책을 수립하는데 공헌할 것으로 기대된다.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.181-196
• /
• 2007

The purpose of this study is to investigate relations between the organizational culture and job satisfaction of ordinary dental technicians who are serving at dental laboratories. Findings of the study are summarized as follows. Ordinary dental technicians' job satisfaction as a whole was measured 3.40 in average score. In detail, those dental technicians were highest in satisfaction about their work, followed by their work conditions, organizational relations and occupation itself in order, but showed some dissatisfaction in terms of their self-realization. Regarding relations between the organizational culture and job satisfaction of ordinary dental technicians, the former was found significantly affecting the latter. Those dental technicians' job satisfaction was being most positively influenced by innovation-orientation as one of their organizational culture styles, followed by task-orientation. In regard to relations between sub-areas of the satisfaction and styles of the culture, ordinary dental technicians' organizational relations were being significantly, positively affected by such styles of their organizational culture as relation-orientation and task-orientation. Those technicians' occupational satisfaction, self-realization and work conditions were being strongly influenced by one of their organizational culture styles, that is, innovation-orientation. Originary dental technicians' work satisfaction was not being significantly affected by any of the organizational culture styles. The more relation- or task-orienting ordinary dental technicians were in organizational culture, the stronger their organizational relations were. The more innovation-orienting ordinary dental technicians were in organizational culture, the more those dental technicians' satisfaction regarding their occupation, self-realization and work conditions is likely to positively change. These findings indicate that ordinary dental technicians are even more orienting both relation and task in organizational culture, while being afraid of innovation and that their organizational culture as a whole is somewhat strict hierarchically.

• 벤처창업연구
• /
• 제18권2호
• /
• pp.95-111
• /
• 2023

우리나라는 국가 경제와 산업발전을 위해 정부주도의 창업정책을 추진하여 높은 수준의 창업률을 달성하였다. 그러나 창업률만큼 높은 수준의 창업기업 폐업률은 국내 창업생태계의 질적 성장이 미흡하다는 것으로 판단할 수 있다. 본 연구는 창업기업이 죽음의 계곡을 극복하여 생존율을 높이는 방안을 입지환경 관점에서 연구하고자 한다. 창업기업의 기술지향성과 시장지향성이 경영성과에 미치는 영향과 입지환경을 구성하는 경제성, 접근성, 네트워크 요인의 조절효과를 분석한다. 본 연구목표를 달성하기 위해 혁신중개자의 기업지원사업을 받은 창업기업 대상으로 실증 분석하였다. 연구결과를 살펴보면, 기술지향성의 연구개발역량은 경영성과에 유의한 영향을 미치며, 시장지향성의 시장정보생성과 시장정보대응은 경영성과에 유의한 영향을 미치는 것으로 나타났다. 입지환경의 하부요인인 접근성은 기술혁신성과 경영성과 간의 관계에서 정(+)의 조절효과를 미치고, 입지환경(경제성, 접근성, 네트워크)은 시장정보생성과 경영성과 간의 관계에서 정(+)의 조절효과를 미치는 것으로 확인할 수 있었다. 본 연구는 창업기업 성공실패 선행연구를 비교·분석 후 공통요인을 도출하였다. 실증분석과 관계자 인터뷰를 통해 창업기업의 지속적 성장을 위한 정책적 시사점을 제시하였다. 향후 연구에서는 수도권·비수도권 창업기업을 대상으로 비교·분석이 필요하며, 지역을 이탈하여 수도권 이전한 창업기업 대상으로 연구하여 지역창업생태계를 발전시키는 방안을 모색해야 할 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.313-318
• /
• 2001

Compression molding is widely used process for the industrial forming of fiber reinforced plastic articles. Its applications are of an extreme variety and the products range from large parts, such as used in the automotive industry to much smaller objects. In this paper, distribution of fiber orientation by the image processing method for rib type compression molded products of each fiber content is measured. And the effects of fiber content, product size on the orientation state are discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.149-152
• /
• 1999

The effect of initial orientation on the microstructure and texture evolution of two ferritic stainless steels was investigated. the columnar and equiaxed crystal specimens which were prepared from continuous casting slab were hot rolled annealed cold rolled and annealed respectively. The rolling and recrystallization textures at each process stage were examined by orientation distribution function (ODF) and electron back-scattered diffraction (EBSD); The observation showed that the orientation density of the $\alpha$-fibre of hot rolled band of columnar crystal specimen was more pronounced than that of the equaxed one at the center layer. Nevertheless the cold rolled textures of Type 430 steel have demonstrated a rather similar development . Compared to Type 430 steel the development of the $\alpha$-fibre in the center layer of Type 409L steel was much more pronounced. The relation between texture evolution and ridging behaviour has been discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.20-25
• /
• 1998

Radial variation of crystalline state in a stem of Chamaecyparis obtusa E. was examined by x-ray diffraction analyses. Relative crystallinity and degree of crystallite orientation showed significant differences between juvenile and adult wood. That is, Relative crystallinity increased with increasing the age from pith to about 20th annual ring, after which it reached a more or less constant value. On the other hand, degree of crystallite orientation decreased outward from pith to about 10 years and presented almost a constant value thereafter. Crystal width by Scherrer's equation did not show any significant differences between juvenile and adult wood. Therefore, it was considered that crystallinity index and degree of crystallite orientation by x-ray diffraction method could be used for evaluating wood quality.

• 한국문헌정보학회지
• /
• 제49권2호
• /
• pp.215-233
• /
• 2015

Despite the continuous efforts of academic libraries to develop various user-centered outreach programs, services and new processes, library anxiety still remains a threat to university students' full use of academic library resources. Meanwhile, a new generation of students, called the "Net Generation," has grown up with developed information and communication technology enter university and must be persuaded to turn to the library. To serve this new group of patrons better, libraries need to adopt new technologies. However, since an initial introduction cost and labor efforts are involved in the integration of the technology, identifying the right time for introduction and the right scope of innovation is essential but difficult. The study proposes a not-yet-well-known, novel experimental design, Regression Point Displacement (RPD), to evaluate an orientation program applying Mobile Augmented Reality (MAR) for STEM students. Since this RPD design requires only one treatment group, the model is expected to be the incomparable and rational way to evaluate the new MAR technology. In the context of an informal learning experience, the findings of the study will determine the effectiveness of an orientation employing the MAR technology.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2004

Injection molding is the most widely used process fir the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result. the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experientially. Using the image processing method, the fiber orientation distribution of welding pars in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.73-80
• /
• 2005

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.1-7
• /
• 2006

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line in injection-molded products is assessed. And the effects of fiber content and injection mold-gate conditions on the fiber orientation are also discussed.