• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.747-754
• /
• 2013

This study introduces a recently designed desktop-sized NC turning system and its components. This machine is designed for the ultra-precise turning of parts with a diameter of 0.5-20 mm with minimum space usage for the machine. This study aims to achieve submicron-level accuracy of movements and good rigidity of the machine for precision machining using the desktop-sized machine. The components such as the main machine structure, air bearing servo spindle, and XZ stage with needle roller guides are designed, and the designed machine is built with a PC-based CNC controller. Its static and dynamic stiffness performances and positioning resolutions are tested. Through machining tests with single-crystal diamond tools, a form error less than $0.8{\mu}m$ and surface roughness (Ra) of $0.03{\mu}m$ for workpieces are obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1774-1779
• /
• 2005

Most of materials receive force in using, therefore, the characteristics of materials must be considered in system design not to occur deformation or destruction. Mechanical properties about materials can be expressed as responsible level of material itself under the exterior operation. Main mechanical properties is strength, hardness, ductility and stiffness etc. Currently, among major measure facilities to measure such mechanical properties, advanced indentation technique has focused in industrial areas as reason of nondestructive and easy applications for mechanical tensile properties and evaluation of residual stress of materials. This study is to find the optimum experimental condition about residual stress advanced indentation technique for accurate analysis of the welded joint of steel materials through indentation load-depth curve obtained from cruciform specimen experiment. Optimum selection was applied to the welded joint of real steel materials to give non-equi-biaxial stress state and compared with general residual stress analyzing method for verification.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2011

Controlling industrial vehicle operated by human in warehouse was not simple since the information transfer for controlling the vehicle was not easy. However, as the technology for the WMS (Warehouse Management System) has been advanced and the PDA (Personal Digital Assistant) has come into wide use in a workplace, the control of man-operated vehicle became less difficult as do to AGVS (Automated Guided Vehicle System). This study examines the ways to improve the efficiency of warehouse operation through introducing rule of task assignment for the vehicles, particularly forklift. This study, basically, refer to AGV operation policy because a great number of studies for AGV dispatching rule have been done and the mechanism for the controlling vehicles is very similar. The workers in field prefer to simple dispatching rules such as Shortest Retrieval Time First (SRTF), Shortest Travel Time First (STTF), and Longest Waiting Time First (LWTF). However, these rules have potential disadvantage. Thus, several rules made up by combining rules mentioned above are introduced and these new rules use threshold value or evaluation formula. The effectiveness of these new rules are tested by simulation and the results are compared. This study proposes favorable dispatching rules for forklift in warehouse for the efficiency of the vehicle operation and stability of service level.

• Environmental Mutagens and Carcinogens
• /
• v.18 no.1
• /
• pp.15-21
• /
• 1998

Transgenic animal and cell line models which are recently developed and used in toxicology fields combined with molecular biological technique, are powerful tools to study the mechanism of mutation in vivo and in vitro, respectively. Transgenic models, which have exogenous DNA incorporated into their genome, carry recoverable shuttle vector containing reporter genes to assess endogenous effects or alteration in specific genes related to disease processes. The lac I and lac Z gnee most widely used as a mutational target in transgenic systems. The assay is performed by treatment with putative mutagenic agents, isolation of genomic DNA from cells or tissues, exposure the isolated DNA to in vitro packaging extract, plating and sequencing. The results from these processes provide not only mutant frequency as quantitative evaluation but also mutational spectrum as qualitative evaluation of various agents. Therefore we introduce and review the principle, detailed procedure and application of transgenic mutagenesis assay system in toxicology fields especially in mutagenesis and carcinogenesis.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.75-80
• /
• 2004

This research was conducted to predict taste of barley kanjang using multiple regression analysis between taste components and sensory score. In the analysis of single correlation, the correlation coefficient of proline, alanine, Methionine, lysine, histidine, lavulinic acid, ${\alpha}$-ketogutaric acid was significant in 5% level. On the other hand, the taste of barley kanjang was not significantly effected by threonine, serine, cystein, phenylalanine, succinic acid, arabinose, xylose, and sucrose. It was impossible to measure taste of kanjang with barley bran to use simple correlation analysis. The 93% of barley kanjang taste was predicted using multiple regression analysis with taste components and sensory evaluation scores.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.121-129
• /
• 2016

As the lifespan of concrete structures increases, their load carrying capacity decreases owing to cyclic loads and long-term effects such as creep and shrinkage. For these reasons, there is a necessity for stress state monitoring of concrete members. Particularly, it is necessary to evaluate the concrete structures for behavioral changes by using a technique that can overcome the measuring limitations of usual ultrasonic nondestructive evaluation methods. This paper proposes the use of a nonlinear ultrasonic method, namely, nonlinear resonant ultrasonic spectroscopy (NRUS) for the measurement of nonlinearity parameters for stress monitoring. An experiment compared the use of NRUS method and a linear ultrasonic method, namely, ultrasonic pulse velocity (UPV) to study the effects of continuously increasing loads and cyclic loads on the nonlinearity parameter. Both NRUS and UPV methods found a similar direct relationship between load level and that parameter. The NRUS method showed a higher sensitivity to micro-structural changes of concrete than UPV method. Thus, the experiment confirms the possibility of using the nonlinear ultrasonic method for stress state monitoring of concrete members.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.25-32
• /
• 2012

This study was conducted to evaluate the quality characteristics of Sulgidduk prepared with different amounts of Hasuo (Polygoni Multiflori Radix) powder. Proximate composition analysis showed that the moisture content, pH, acidity, and volume of Sulgidduk decreased with a rise in the level of added hasuo powder. The L-value decreased, while a and b values increased, with increasing amounts of hasuo powder. In mechanical evaluation of physical properties, hardness decreased while springiness, chewiness, cohesiveness, and brittleness increased with increasing hasuo powder content. Scanning election microscopy indicated that the number of air cells decreased as the ratio of hasuo powder increased. Sensory evaluation showed that moistness and springiness decreased significantly when the amounts of hasuo powder increased. The sample containing 30 g hasuo powder scored the highest for sweet taste, savory taste, springiness, chewiness, swallowing, and in overall acceptability scores. Next, the sample containing 60 g hasuo powder scored higher than control. The optimum concentration indicate that addition of 30~60 g hasuo powder to Sulgidduk resulted in highest quality.

• Journal of Surface Science and Engineering
• /
• v.55 no.6
• /
• pp.425-432
• /
• 2022

Antifouling paints that inhibit the attachment and contamination of marine organisms mainly use TBT compounds, but because of their toxic components, they cause ecosystem disturbance and environmental destruction problems, so It is necessary to research eco-friendly antifouling paints that are easy to maintain and effective antifouling technologies. In this study, physical surface treatment of silane coating and chemical antifouling technology were applied to the metal surface to secure the stability of the surface of the marine structure and inhibit the attachment and growth of marine organisms. Adhesion of marine organisms was evaluated according to the coating conditions through surface evaluation of the charged material for 15 months in the waters of the west coast of Korea. In accordance with ASTM D6990-05, antifouling properties fouling rates (FR) and physical degradation rates(PDR) were evaluated through visual inspection of the evaluation specimens. As a result of evaluating the antifouling performance of the coated surface, it was confirmed that the antifouling performance was maintained at the 50% level even after 15 months in the sample subjected to physical processing and silane coating.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.3
• /
• pp.115-127
• /
• 2006

The purpose of this paper is evaluation of various normalization methods and fusion algorithms in addition to pattern classification algorithms for multi-biometric systems. Experiments are performed using various normalization functions, fusion algorithms and pattern classification algorithms based on Biometric Scores Set-Releasel(BSSR1) provided by NIST. The performance results are presented by Half Total Error Rate (WTER). This study gives base data for the study on performance enhancement of multiple-biometric system by showing performance results using single database and metrics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1342-1359
• /
• 2021

The data deduplication technique identifies the duplicates and minimizes the redundant storage data in the backup server. The chunk level deduplication plays a significant role in detecting the appropriate chunk boundaries, which solves the challenges such as minimum throughput and maximum chunk size variance in the data stream. To provide the solution, we propose a new chunking algorithm called Dynamic Prime Chunking (DPC). The main goal of DPC is to dynamically change the window size within the prime value based on the minimum and maximum chunk size. According to the result, DPC provides high throughput and avoid significant chunk variance in the deduplication system. The implementation and experimental evaluation have been performed on the multimedia and operating system datasets. DPC has been compared with existing algorithms such as Rabin, TTTD, MAXP, and AE. Chunk Count, Chunking time, throughput, processing time, Bytes Saved per Second (BSPS) and Deduplication Elimination Ratio (DER) are the performance metrics analyzed in our work. Based on the analysis of the results, it is found that throughput and BSPS have improved. Firstly, DPC quantitatively improves throughput performance by more than 21% than AE. Secondly, BSPS increases a maximum of 11% than the existing AE algorithm. Due to the above reason, our algorithm minimizes the total processing time and achieves higher deduplication efficiency compared with the existing Content Defined Chunking (CDC) algorithms.