• The Journal of Fisheries Business Administration
• /
• v.39 no.3
• /
• pp.1-23
• /
• 2008

Recently, traceability systems are introduced as a new food safety information system. To trace food products efficiently, they must have an automatic identification capability at the individual product level. This capability can be gained through RFID technology. But there is not yet any performance evaluation tool on RFID-based traceability systems (RFID-TS). This study developed an evaluation tool of RFID-TS. To develop the tool, this study considered the objective and the components of RFID-TS as their performance constructs. According to Churchill's paradigm, the tool was established through two stages. The final evaluation tool consisted of four constructs (risk, operational benefits, IS (information system), and network) and nine sub-constructs. Among the four constructs, risk and IS were found as the most important performance constructs through regression analysis. Among the nine sub-constructs, service (which belonged to the IS construct) and economic risk (which belonged to the risk construct) were found as the most important performance sub-constructs.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.7
• /
• pp.123-131
• /
• 2019

In this paper, related studies were investigated by dividing them into cost-benefit analysis, security continuity services, and SW-centric calculations. The case analysis was conducted on A institutions in the United States, Japan and South Korea. Based on this, an improvement model was prepared through comparison with the current system. The SCS(Security Continuity Service) performance evaluation system-based information protection service cost calculation model is proposed. This method applies a service level agreement(SLA) and NIST Cybersecurity framework that are highly effective through cost-effectiveness analysis and calculates consideration based on characteristics, performance criteria, and weights by information protection service. This model can be used as a tool to objectively calculate the cost of information protection services at public institutions. It is also expected that this system can be established by strengthening the current recommended statutory level to the enforceability level, improving the evaluation system of state agencies and public institutions, introducing a verification system of information protection services by national certification bodies, and expanding its scope to all systems.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.4
• /
• pp.65-82
• /
• 2020

This study examined information sharing and evaluation as determinants of the spread of fake news among Nigerian youths on social media using experience from COVID-19 pandemic. A descriptive survey design was adopted for the study and a Web-based questionnaire (Google Forms) was used to collect data for the study. The total responses of 278 were collected from the participants, which represents the unit of analysis. The finding of the study revealed that most Nigerian youths used Facebook, Twitter, WhatsApp and Instagram to share information on COVID-19. However, only a few Nigerians used Linkedln and other types of social media to share information on COVID-19. It was also found that building a relationship with social media communities, enjoyment and risk taking, and political inclination influence the sharing behavior of Nigerian youths during the COVID-19 pandemic. Results show that social media handle/page found sharing of fake news on COVID-19 especially on the treatment, vaccines numbers of cases and symptoms. The study concludes that there is a positive relationship between information evaluation and the spreading of fake news on COVID-19 among Nigerians. Information sharing and evaluation should be done with the utmost level of objectivity and sincerity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.546-551
• /
• 2004

The study was focused on setting priority for future core technologies in crops using Analytic Hierarchy Process (ARP). The technologies were derived by Delphi method. Evaluation criteria for the priority setting were decided as 'technology', 'market oriented', and 'public concerns' by council. The future core technologies were divided as four groups by importance and R&D level. Technologies in upper two groups were considered in the study. Group I had high importance and high R&D level. Group II had high importance and lower R&D level. Questionnaires were given to 8 specialists in crops. As the results, 'public concerns' was decided as the most important evaluation criterion. The most important technologies are 'developing of growing technology that has low inputs and production cost for environmental friendly agriculture' in group I, and 'developing of gene searching, characteristics transformation, and commercialization technologies for crops using bio-technology' in group II.

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.482-496
• /
• 2003

effectiveness of the PAM graphite-electrode technology for the treatment of many types of low-level radioactive waste including : combustible material, solidified resins in cement, inorganic materials, steel, glass, and solidified boric acid cement. The objectives of PAM-200 evaluation were to verify that 1) the facility meets air emission regulations, 2) the facility can be safely operated when processing hazardous and radioactive materials and 3) satisfactory final waste forms can be produced. Results, derived from KAERI's(Korea Atomic Energy Research Institute) analyses for samples of vitrified product, scrubbing solution and offgas collected during test period, show that PAM-200 can treat radioactive wastes as well as hazardous wastes with toxic constituents and radionuclides contained in the offgas exiting from the stack to the environment controlled to be far lower than the limit regulated by air conservation law and atomic law.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1248-1252
• /
• 2014

In this study, we designed a signal processing module using a radiation hardened technology that can be applied to the all measurement sensors inside nuclear power plant containment. Also, for verification that it can be used for high-level radiation environment (Harsh environmental zone inside containment of NPP), we carried out evaluation tests for a designed module using a $Co^{60}$ gamma-ray source up to 12 kGy(Si). And, we had checked radiation hardening level that it has been satisfied up to 12 kGy(Si).

• Nuclear Engineering and Technology
• /
• v.39 no.2
• /
• pp.133-142
• /
• 2007

The Electric Power Research Institute (EPRI) demonstrated a method for monitoring the performance of instrument channels in Topical Report (TR) 104965, 'On-Line Monitoring of Instrument Channel Performance.' This paper presents the results of several models originally developed by EPRI to monitor three nuclear plant sensor sets: Pressurizer Level, Reactor Protection System (RPS) Loop A, and Reactor Coolant System (RCS) Loop A Steam Generator (SG) Level. The sensor sets investigated include one redundant sensor model and two non-redundant sensor models. Each model employs an Auto-Associative Kernel Regression (AAKR) model architecture to predict correct sensor behavior. Performance of each of the developed models is evaluated using four metrics: accuracy, auto-sensitivity, cross-sensitivity, and newly developed Error Uncertainty Limit Monitoring (EULM) detectability. The uncertainty estimate for each model is also calculated through two methods: analytic formulas and Monte Carlo estimation. The uncertainty estimates are verified by calculating confidence interval coverages to assure that 95% of the measured data fall within the confidence intervals. The model performance evaluation identified the Pressurizer Level model as acceptable for on-line monitoring (OLM) implementation. The other two models, RPS Loop A and RCS Loop A SG Level, highlight two common problems that occur in model development and evaluation, namely faulty data and poor signal selection

• Journal of Mechanical Science and Technology
• /
• v.19 no.7
• /
• pp.1469-1477
• /
• 2005

Vibrations related to ride comfort should be considered at the beginning of design stage. In general, ride comfort of human is mainly affected by vibration transmitted from the floor and seat. Also, vibration level is very important regarding with running safety on freight wagon. To ensure ride comfort for passenger coach and vibration level for freight wagon, tests had been repeated by different test procedures with several equipments. With different measuring and evaluations for these results, it took much time to evaluate test results. In this paper, a new evaluation procedure was developed combining several software for ride comfort and vibration level test on railway vehicles. In addition, this developed system is capable of ride comfort test and vibration test by a single integrated system that is capable of immediate reporting the test result. With this developed system, the comfort in a passenger coach and the vibration in a freight car were evaluated. And the simulation results from the proposed system are verified by a field test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.131-136
• /
• 2016

An appropriate evaluation on learner's pronunciation has been an important part of foreign language education. The learners should be evaluated and receive proper feedback for pronunciation improvement. Due to the cost and consistency problem of human evaluation, automatic pronunciation evaluation system has been studied. The most of the current automatic evaluation systems utilizes underlying Automatic Speech Recognition (ASR) technology. We suggest in this work to evaluate learner's pronunciation accuracy and fluency in word-level using the ASR and non-native teacher's speech model. Through the performance evaluation on our system, we confirm the overall evaluation result of pronunciation accuracy and fluency actually represents the learner's English skill level quite accurately.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.101-108
• /
• 2024

The total number of railroad stations managed in Korea is 322 (including general and wide-area railways), and a considerable number of stations are aging. In terms of the size of the existing railway station and the number of entrances, it has not been possible to secure adequate service capacity, and the demand for station improvement is increasing due to changes in surrounding conditions such as urban development. In the past, railroad stations were focused on the simple function of a connection passage in terms of maintenance or management, but in recent years, railroad stations are also changing to an atmosphere that they should be reborn as a user-centered comfortable, convenient, and safe service provision space. In this study, a case study related to the improvement of the old railway station was conducted to derive an improvement plan that meets the improvement standard of the old station, and the service level evaluation standard was developed. By introducing the concept of service level (LOS) in the development model, station congestion, station movement convenience, and station safety were selected as evaluation indicators. In addition, this development model applied an analytical stratification technique to divide various evaluation elements of each indicator into major and detailed elements and derive the relative importance of the elements by class. Priority for improvement was derived using the ratio of the number of E and F on the LOS for each facility. Based on this study, it is expected to be helpful in using it as an evaluation criterion for improving objective and equitable railway station.