• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.768-775
• /
• 2005

Lentinus edodes powder was added at 1-3%(w/w) to improve functional properties of jocheong. Content of crude protein, ash, crude lipids, total mineral, free sugar and reducing sugar increased with increasing amount of L. edodes powder, while viscosity and solid and carbohydrate contents decreased. Through amino acid analysis, 17 amino acids were identified and quantified, glutamic acid being the major amino acid. No significant differences were observed in fatty acid composition and pH between control and L. edodes powder-added jocheong. Addition of mushroom powder in jocheong decreased lightness, yellowness and redness in Hunter's color value. Sensor score of jucheong containing 1% of L. edodes powder was similar to that of control. Results showed jocheong containing less than 2% L. edodes powder gave highest scores in quality characteristics and sensory evaluation.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.7-16
• /
• 2009

Appenzeller cheese samples were prepared by addition of 0.5, 1.0, and 2.0% green tea (Camellia sinensis, CS) powder and control cheese. We examined various quality characteristics of the novel cheese, such as viable-cell counts, pH, water-soluble nitrogen (WSN), non-casein nitrogen (NCN), non-protein nitrogen (NPN), and catechin level during maturation for 16 weeks at $14^{\circ}C$. To develop a Korean natural cheese containing green tea powder, we also analyzed the changes in the polyacrylamide gel electrophoresis pattern, chemical composition, and sensory qualities. The viable cell counts of the samples were not significantly different. Until the $3^{rd}$ week, the pH of the CS cheese decreased with an increase in the maturation time. However, the pH gradually increased by the $12^{th}$ week, while WSN, NCN, NPN also increased. The WSN, NCN, NPN, and catechin values for the CS cheese samples were significantly higher than the values for the control cheese. The polyacrylamide gel electrophoretic pattern of caseins for the CS cheese indicated that this cheese degraded more rapidly than the control cheese did. In the sensory evaluation, cheese with 1.0% CS powder showed the highest scores in taste and appearance and good scores in flavor and texture. These results indicate that 1.0% CS is the optimal value for addition to cheese, and cheese containing 1.0% CS shows good physiological properties and reasonably high overall sensory acceptability.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.349-362
• /
• 2018

An annual plant, Eclipta prostrata (Linn) is a member of the Asteraceae plant family and inhabited in tropical or subtropical regions of the world. Through many previous researches, E. prostrata has been extensively studied for its hepatoprotective effect, antivenom potential against viper venom, antioxidant, hair-growth, wound-healing efficacy and so on. In this study, for better understanding of the potential of E. prostrata as skin protectant, we conducted the experiments evaluating the antioxidant and antiaging efficacy. To this end, 50% ethanolic extract of E. prostrata and its ethyl acetate fraction were prepared and investigated. For the evaluation of antioxidant capacity of the samples, $FSC_{50}$ and $OSC_{50}$ were estimated. As a result, $OSC_{50}$ of ethyl acetate fraction was 2.7 times superior to $OSC_{50}$ of L-ascorbic acid, a well known antioxidant agent. Futhermore E. prostrata showed notable reactive oxygen species (ROS) scavenging effect and protective effect against $H_2O_2$ in the celluar level as well. Especially, in the $^1O_2$ induced hemolysis test, $64{\mu}g/mL$ of ethyl acetate fraction showed greater than 6 times increased retardation effect compare to control which means E. prostrata has remarkable antioxidant capacity. To validate the antiaging effect of the samples, we conducted elastase inhibition assay using elastase solution extracted from human skin fibroblasts, Hs68. As a result, $16{\mu}g/mL$ of each sample showed 6.8% and 14.0% of elastase inhibition respectively. Finally, antimicrobial activity of E. prostrata was assessed to validate the possibility as alternative preservative. From the result, ethyl acetate fraction showed oustanding antimicrobial activity as of methyl paraben, a well known chemical preservative. In conclusion, these results suggest that E. prostrata can be used as natural skin protectant or preservative as natural ingredient in food or cosmetics industry.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2006

A total of 120 pigs were used to investigate the effect of feeding probiotics on quality properties of pork. About 6 kg pigs were randomly alloted into one or three experimental diet groups (C: commercial diet feed; T1: 0.1% KBC1121 feed; T2: 0.1% YC2000+0.1% KBC1121 feed). Pigs were slaughtered at approximately 110 kg live weight and chemical composition and physico-chemical characteristics were measured in pork loin. Moisture, crude protein and crude ash were not differences among the treatments. However, crude fat content of T2 was significantly higher than that of other treatments. All of dietary probiotic groups showed significantly higher pH than control. WHC was significantly higher in T1 than other treatments. Cooking loss, shear force value and cholesterol content were not differences among the treatments. In meat color, $L^*$ value was not difference among the treatments, but $a^*\;and\;b^*$ value were lower in T1 than other treatments. In textrure properties of cooked meat, brittleness, hardness, gumminess and chewiness value were significantly higher in T1 than other treatments. Sensory evaluation was not difference among the treatments. The myristic, stearic and oleic acid content of T2 were significantly higher than those of other treatments. Whereas linoleic acid was significantly lower than other treatments. Unsaturated fatty acid (UFA) was significantly higher in T1 than T2. Essential fatty acid (EFA) and EFA/UFA were higher in the order of T1 > C > T2. In amino acid composition, total and essential amino acid, aspartic acid, threonine, serine, glutamic acid, valine, isoleucine, leucine and lysine level were lower in T2 than other treatments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.97-106
• /
• 1984

The Antarctic krill, Euphausia superba, is drawing attention over the world as the largest source of unutilized proteins in the ocean. For the use of krill as a human food, processing conditions of krill sauce by autolysis and/or commercial proteolytic enzyme digestion were examined. The krill was chopped and mixed with equal weight of water, and hydrolyzed by autolysis and/or commercial proteolytic enzyme digestion. The optimal conditions for hydrolysis of krill were $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by autolysis, $52.5^{\circ}C$, pH 6.3, 3hours by bromelain (0.5 %) digestion, and $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by commercial complex enzyme (5 %) digestion, respectively The maximum hydrolyzing rate of protein were 83.2 % by autolysis, 89.7 % by bromelain digestion, 92.7 % by commercial complex enzyme digestion. After krill meat hydrolyzed by autolysis at optimum condition, inactivated at $100^{\circ}C$ for 20 minutes and filtered with Buchner funnel. Two kinds of products were prepared with krill hydrolysate and preservatives: one contained 10 % of sodium chloride and 0.06 % of benzoic acid and the other 10 % of sodium chloride and 3 % of ethyl alcohol. These products were filled in the sterilized glass bottle and sealed. The pH, volatile basic nitrogen, amino nitrogen, color value (L, a and b values) and viable counts of bacteria were determined during storage at $37^{\circ}C$. The results showed that the products could be preserved in good condition during one month at $37^{\circ}C$. As a method to reduce the sodium level in krill sauce, it is convinced that sodium chloride could be replaced half in partially by potassium chloride. In the products prepared from krill by autolysis, bromelain or commercial complex enzyme digestion, hypoxanthine and 5'-IMP were abundant among the nucleotides and their related compounds as 15.3-20.4 ${\mu}mole/g$, dry solid, 2.2-2.5 ${\mu}mole/g$, dry solid, respectively. The abundant free amino acids were lysine, leucine, proline, alanine and valine. The contents of these amino acids were 67.4 %, 69.4 %, 69.8 % of the total free amino acids of each products. And TMAO, betaine and total creatinine were low in contents. The flavor of krill sauce prepared from krill by autolysis or enzyme digestion was not inferior to that of traditional Kerean soy sauce by sensory evaluation.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.217-226
• /
• 2004

This study was canied out to evaluate the quality characteristics of the fermented pork with Korean traditional seasonings. The samples, outside muscle of pork ham were cut to cube(7 ${\times}$ 12 ${\times}$ 2cm) and five Korean traditional seasonings such as garlic paste(TI), pickled Kimchi(T2), pickled Kimchi juice(T3), soybean paste(T4), red pepper paste(T5) were seasoned by the proportions of meat to seasonings(1 : 1). The seasoned samples were fennented at - 1 ${\pm}$ 1$^{\circ}C$ for 20 days. According to proximate composition analysis, all pork samples contained protein 20 ${\sim}$ 22%, fat 3 ${\sim}$ 5%, moisture 64 ${\sim}$ 70% and ash 1.8 ${\sim}$ 2.0%. However, T5 had high crude fat level and relatively low moisture content. The highest pH among treatments was shown in TI whereas T3 showed the lowest. Water holding capacity(WHC) of T4 and T5 were higher, while those values were lower in T3 compared with other treatment. Shear force value was the highest in T5, while it was the lowest in T4. TBARS value of T3 was the highest, while that was the lowest in T4. Moreover the highest VBN value was observed in T4 due to fermentation of soy protein. However, the lowest VBN value shown in Tl indicated the inhibition of protein degradation by the garlic. The highest saccarinity was shown in T5 but it was the lowest of in T3. Salinity was shown to be high in T2 and low in T5. $L^*$ values of T4 was higher both at the surface and inner side of samples than the others but T5 showed the lowest value. T2 showed the highest $a^*$ value but T4 and T5 showed the lowest. In the result of sensory evaluation for cooked meat, T5 had the highest score in all item including overall acceptability, while T4 had the lowest score. Unsaturated fatty acid(UFA) ratio of T5 and n were 72.16 and 69.93 respectively, and the ratio of UFA/Saturated fatty acid(SFA) were higher in the order of T5 >T4> T3 >Tl >T2. Overall quality characteristics were higher in the order of T5 >T2 >Tl >T4 >T3.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.633-638
• /
• 2017

The amount of radioactive waste has been rapidly increased with development of radiation treatment in medical field. Recently, it has been a common practice to use I-131 for thyroid cancer, F-18 for PET/CT and Tc-99m for diagnosis of nuclear medicine. All the wastes concerned have been disposed of by means of the self-disposal method, for example incineration, after storage enough to decay less than clearance level. IAEA proposed criteria for clearance level of waste which depends on the individual ($10{\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, specific radioactivity of radioactive waste contaminated with Re-186 was measured to confirm whether it meets the clearance level. Re-186 has long half life of 3.8 days relatively and emits beta and gamma radiation, therefore it can be applied in treatment and imaging purposes. The specific radioactivity of contaminated gloves weared by radiation workers was measured by MCA(Multi-channel Analyzer) which was calibrated by reference materials in accordance with the measuring procedure. As a result, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and physical half-life was considered, and it is showed that the physical half-life is longer than induced half-life. Therefore, the storage period of radioactive waste for self-disposal may be curtailed in case of application of induced half-life. The result of this study will be proposed as ISO standard.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.27-42
• /
• 2020

Startup accelerators have emerged as new investment entities that help early startups, which are not easy to survive continuously due to lack of funds, commercialization capabilities, and experiences. As their positive performance on early startups and the ecosystem has been proven, the number of early startups which want to receive their investment is also increasing. However, they are vaguely preparing to attract accelerators' investment because they do not have any information on what factors the accelerators consider important. In addition, researches on startup accelerators are also at an early level, so there are no remarkable prior studies on factors that decide on investment. Therefore, this study aims to help startups prepare for investment attraction by looking at what factors are important for accelerators to invest, and to provide meaningful implications to academia. In the preceding study, we derived five upper level categories, 26 lower level accelerators' investment determinants through the qualitative meta-synthesis method, secondary data analysis, observation on US accelerators and in-depth interviews. In this study, we want to derive important implications by deriving priorities of the accelerators' investment determinants. Therefore, we used AHP that are evaluated as the suitable methodology for deriving importance and priority. The analysis results show that accelerators value market-related factors most. This means that startups that are subject to investment by accelerators are early-stage startups, and many companies have not fully developed their products or services. Therefore, market-related factors that can be evaluated objectively seem to be more important than products (or services) that are still ambiguous. Next, it was found that the factors related to the internal workforce of startups are more important. Since accelerators want to develop their businesses together with start-ups and team members through mentoring, ease of collaboration with them is very important, which seems to be important. The overall priority analysis results of the 26 investment determinants show that 'customer needs' and 'founders and team members' understanding of customers and markets' (0.62) are important and high priority factors. The results also show that startup accelerators consider the customer-centered perspective very important. And among the factors related to startups, the most prominent factor was the founder's openness and execution ability. Therefore, it can be confirmed that accelerators consider the ease of collaboration with these startups very important.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.235-248
• /
• 2010

To construct the standard methods for evaluation of physicochemical characteristics of tailings in Korea, specific gravity, paste pH, grain size, mineral compositions and heavy metal concentrations of total 26 tailings from 21 metallic mines were analyzed. Specific gravity of tailings ranged from 2.61 to 4.31 (avg. 3.04), and sand and silt grain were dominant in the tailings. Ranges of paste pH were 2.1-9.5 in tailings (7.1-9.2 at magmatic, skarn and hydrothermal replacement deposits and 2.1-9.5 at hydrothermal vein deposits). Additionally, hydrothermal vein deposits could be reclassified into three categories: (1) paste pH>7.0, (2) 4.0