• Applied Biological Chemistry
• /
• v.42 no.2
• /
• pp.147-151
• /
• 1999

Quality characteristics of Satsuma mandarin (Citrus unshiu Marc. var. okitsu) harvested in early December according to production areas and sea level altitude of Cheju were investigated. Soluble solids and flesh ratio were $9.06{\sim}12.98,\;77.32{\sim}81.27%$ on citrus fruits harvested in orchards located below 100 m sea level (lower area), and were $10.16{\sim}12.26,\;75.00{\sim}81.55%$ in orchards 150 m sea level altitude (higher area), respectively. Acid content of citrus juice was $0.83{\sim}1.21%$ in fruits harvested in lower area, and was $0.94{\sim}1.34%$ in higher area except Hankyung-myun area. The differences of soluble solids and acid contents by harvesting periods for 10 days were 0.91 and 0.82 for soluble solids; 0.15 and 0.13% for acid contents, respectively. In proportion to late harvesting, Brix/acid ratio and fruit quality were improving. Soluble solids of fruits harvested from lower area were higher than those of fruits from higher area, but acid contents were lower in fruits from lower area than in fruits from higher area. In sensory evaluation on fruit appearence, the differences between two altitudes were not clear, but panelists marked higher points on fruits harvested in main production areas, Seogwipo-si and Namwon-eup which are southern areas. Fruit quality harvested in Seogwipo-si areas showed better quality than fruits from other harvested areas.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.413-418
• /
• 2020

It is necessary to manage the prediction accuracy of the machine learning model to prevent the decrease in the performance of the grid network condition prediction model due to overfitting of the initial training data and to continuously utilize the prediction model in the field by maintaining the prediction accuracy. In this paper, we propose an automation technique for maintaining the performance of the model, which increases the accuracy and reliability of the prediction model by considering the characteristics of the power grid state data that constantly changes due to various factors, and enables quality maintenance at a level applicable to the field. The proposed technique modeled a series of tasks for maintaining the performance of the power grid condition prediction model through the application of the workflow management technology in the form of a workflow, and then automated it to make the work more efficient. In addition, the reliability of the performance result is secured by evaluating the performance of the prediction model taking into account both the degree of change in the statistical characteristics of the data and the level of generalization of the prediction, which has not been attempted in the existing technology. Through this, the accuracy of the prediction model is maintained at a certain level, and further new development of predictive models with excellent performance is possible. As a result, the proposed technique not only solves the problem of performance degradation of the predictive model, but also improves the field utilization of the condition prediction model in a complex power grid system.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.725-736
• /
• 2023

The compliance of deep geological disposal facilities for high-level radioactive waste with safety objectives requires consideration of uncertainties owing to temporal changes in the disposal system. A comprehensive review and analysis of the characteristics of this evolution should be undertaken to identify the effects on multiple barriers and the biosphere. We analyzed the evolution of the buffer, backfill, plug, and closure regions during the early phase of the post-closure period as part of a long-term performance assessment for an operating license application for a deep geological repository in Finland. Degradation mechanisms generally expected in engineered barriers were considered, and long-term evolution features were examined for use in performance assessments. The importance of evolution features was classified into six categories based on the design of the Finnish case. Results are expected to be useful as a technical basis for performance and safety assessment in developing the Korean deep geological disposal system for high-level radioactive waste. However, for a more detailed review and evaluation of each feature, it is necessary to obtain data for the final disposal site and facility-specific design, and to assess its impact in advance.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1331-1339
• /
• 2012

Safety valve used in LNG/LNG-FPSO ships is a high value valve, and it plays an important role in maintaining a fixed level of pressure by emitting LNG gas out of pipes in LNG piping system under the cryogenic and high-pressure condition when the pressure of the system connected with the LNG storage tank and pipes reaches over the set pressure. The structural stability is required for the inner pressure and thermal load because of the cryogenic and high-pressure condition, and a reliability of the safety valve is necessary for impact and deformation by opening the valve. But, the safety valve, which plays a key role for a safety of the transport and storage system, is depended on imports for over 90%, and in domestic production, the design of the valve is performed on the basis of experiences of the works without quantitative analysis for the inner operation characteristics and structural stability of the valve. In this study, impact velocity is calculated by theoretical analysis for obtaining the structural stability of the guide according to the impact load by opening the valve. The shape of the guide and the diaphragm for satisfying the structural stability are suggested and verified by using a thermal-structural analysis.

• STI Policy Review
• /
• v.1 no.4
• /
• pp.41-61
• /
• 2010

The Korean government's support towards the establishment of leading research hubs at universities began with the initiation of the Science/ Engineering Research Center in 1990. Such efforts to provide support to research organizations have continued for some twenty years in various forms, which implies that building research hubs was critical in acquiring global leadership in research. However, the effect of such research hub nurturing policies has never been properly evaluated, apart from an assessment of their validity. Therefore, this paper analyzes how major programs to form research groups by providing assistance to joint research by researchers at universities are operated, and the characteristics of such programs through comparative analysis with other programs. There are two major focal points in the analysis: the first is the evaluation of the level of differentiation between Research Organization Support Programs (ROP) and other R&D Programs from an efficiency perspective, and the second is an examination of the extent of systematization of research organizations that exist at universities and impact of Research Organization Support Programs on the activities of participating professors from an effectiveness perspective. The result showed that the ROP were no longer only relevant for the formation and maintenance of research groups. Other R&D Programs are growing increasingly larger in scale and conducted over longer periods of time. Thus, the ROP can no longer be differentiated from other programs in research period and size of funding. An analysis on the effect of ROP demonstrated that all activities by participating professors in organizations that were the beneficiaries of group research assistance were more active compared to their counterparts in organizations that received other research support, but there was little difference in the elements of systematization. This implies that the joint research conducted at universities is not systematized and that it is still research based on individual themes but conducted jointly. In addition, it also means that the ROP is failing to effectively lead the systematization of research. In other words, today, university research organizations are not operated as independent, long-term bodies, but are more relevant as a combination of research units of individual professors.

• Fisheries and Aquatic Sciences
• /
• v.18 no.3
• /
• pp.257-264
• /
• 2015

A 10-week feeding trial was carried out to investigate the feasibility of using spent coffee ground (CG) as a potential feed ingredient for olive flounder. Growth, feed utilization, body composition and antioxidant enzyme activity were examined. A control diet was formulated and three other diets were prepared to contain 5, 10 or 15% CG (designated as Con, CG5, CG10 and CG15, respectively) by replacing for wheat flour. Two hundred forty fish ($104{\pm}0.7g/fish$) were allotted to 12 circular tanks of 400 L capacity at a density of 20 fish per tank and fed the experimental diets twice daily. At the end of the feeding trial, fish fed the CG5 diet exhibited significantly (P < 0.05) higher growth performance than those fed the control diet. Also, fish fed the CG10 diet had a comparable growth to that of the control group, but further increase of dietary CG inclusion level to 15% resulted in significant decrease of growth performance. Fish fed the CG15 diet showed significantly lower feed efficiency and protein efficiency ratio than other treatments. Significantly lower muscle protein content was observed in fish fed CG15 diet compared to the control. Significant reduction in plasma cholesterol concentration was found in fish fed CG15 diet compared to control. No significant changes were found in alkyle and superoxide radicals scavenging activities of plasma, muscle and liver among dietary treatments. Also, liver total protein, total antioxidant capacity, catalase and glutathione peroxidase activities were not significantly influenced by dietary inclusion of CG. According to these results, we concluded that CG can be included up to 10% in the diet for olive flounder without any adverse effects on growth, feed utilization and antioxidant enzyme activity.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.146-153
• /
• 2006

A performance test of the stainless steel based sintered metal filter was conducted on the low and intermediate level radioactive waste (LILW) vitrification process. The applicability of the metal filter was based on the test results as well. The baseline pressure drop of the metal filter was evaluated similar to the ceramic filter. During the test, when the flow rate of off-gas was $110Nm^{3}/h$, the total baseline pressure drop was shown as $92mmH_{2}O$. The total pressure drop was attributed to the filter media and the residual dust layer and the value of each was $25mmH_{2}O\;and\;67mmH_{2}O$ respectively. The SEM-EDS spectrum and micrograph of the metal filter specimen showed, no corrosion and no physical damage both at the skin membrane and at the support layer. And most of the baseline pressure drop was caused by the deposition of dust on the surface of the membrane. In conclusion, even though the filter exposure time was short at the test, the performance of the stainless steel based metal filter was acceptable for the treatment of LILW vitrification process.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.409-416
• /
• 2015

Purpose: This study evaluates a new banana bulk packaging method under the real transport conditions of Sri Lanka. Methods: A field evaluation of optimized 8-mm thick Styrofoam sheets used as the cushioning material was applied. A trial transport was conducted from Thambuttegama to Colombo using a medium-sized open truck, with banana leaves as the control material. Data were recorded at the farmer, transporter, retailer, and consumer stages of the supply chain. Mechanical damage, physiological loss in weight, fruit firmness, total soluble solids, ripeness index, visual quality ratings, and the physical damage index of the bananas were measured at each stage. A cost-benefit analysis was also conducted for both packaging methods. Results: The 8-mm styrofoam sheets significantly reduced (p < 0.05) the mechanical damage from 26.3% to 12.9% compared to the conventional method for long-distance transport, and the physiological loss in weight showed a decrease of 2.88%. The loss of firmness of the fruits followed a simmilar pattern for both methods until reaching the retailer, but at the consumer was significantly higher (p < 0.05) for the control. However, the physical damage index at the retail stage for the control showed symptoms of physical injury, whereas the bananas transported using the cushioning materials exhibited only minor symptoms. Further, the visual quality of the fruits after transport from the farmer to the consumer was preserved, which is one of the main factors affecting consumer preference and retail price. The proposed method increases the profit margin by 51.2% for Embul bananas owing to the reduced postharvest losses. Conclusion: The 8-mm thick Styrofoam sheets reduced the physical damage to the bananas, with the quality parameters maintained at the prefered level. Moreover, profits may be increased.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.2
• /
• pp.238-249
• /
• 2012

Flight test of flapping micro air vehicles (FMAVs) is carried out using an instrumented measurement system to obtain various engineering parameters and hence to assess the flight performance of the vehicles through the data investigation. An indoor flight test facility equipped with a motion capture system and tracking cameras is used for the work presented in this paper. Maneuvers including straight-level flight, ground flapping, takeoff and landing are tested. Spatial position and orientation data are obtained from the retro-reflective tracking markers attached to the vehicles. Subsequent test analysis is carried out by generating performance parameters from raw data and then assessing the flight performance by comparison of the vehicles. The main findings of this work confirm that the test method and procedures presented here enable the systematic numerical data measurement and assessment of the flying performances of these vehicles, and show the applicability for the test and evaluation of general flapping MAVs.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1132-1140
• /
• 2014

This study aimed to investigate the changes in antioxidant activities, quality characteristics, and storage stability of mayonnaise prepared with perilla oil with the addition of mulberry powder ranging from 0 to 5%. The antioxidant activities of perilla oil mayonnaise (PM), as determined by DPPH and ABTS radical scavenging activity, as well as FRAP and total phenolics content were improved by the addition of mulberry powder compared with the control sample. Antioxidant activities were dependent on the amount of mulberry powder added. Lipid oxidation of PM decreased with a higher amount of mulberry powder, based on measurements of peroxide value. The emulsion stability of PM increased with decreases in the amount of mulberry powder level. The a-value in PM color increased with increasing amount of mulberry powder. Sensory evaluation showed that the highest score in overall acceptability of PM was achieved with 4% mulberry.