• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.165-169
• /
• 1980

Consumer acceptance and preference tests for commercial milk were run with laboratory consumer panel. The results were summarized as follows: 1. According to result of the paired comparison preference test between milk K and each of 4 commercial milk tested a significant difference in the consumer preference was not recognized at 5 percent level 2. According to result of hedonic scale test for commercial milk, a significant difference on both treatment and panel member effect was not recognized at 5 percent level. 3. According to result of food action scale test for commercial milk, the frequency of 'I would drink this every opportunity I had' was the highest as 38 percent. 4. According to the rank test for the determination of the preference for milk flavor on the temperature of sample, the frequency of sampling at $20^{\circ}C$ was the highest. 5. A significant difference on the flavor of milk was recognized among 5 samples of commercial milk by both difference test and profile test as reported in the previous paper (Korean J. Food Sci. Technol. 12(3), 150 and 158(1980)), but not by rank test, preference test and hedonic scale test. This fact suggests that rank test, preference test and hedonic scale test are influenced by the difference on the preference of the panel members and on the basis of quality, etc.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.485-490
• /
• 2008

In this study, organic tea leaves were characterized with the aim of developing an organic beverage process. The green tea leaves grown using organic farming techniques were collected in Haenam, Korea. Catechins in green tea leaves were extracted by chloroform and ethyl acetate and these were then analyzed quantitatively and qualitatively by HPLC (high pressure liquid chromatography). The color and pH values of the green tea extracts were also measured. The catechin levels of April-harvested, May-harvested and June-harvested, semi-fermented leaves at 0.5% were 66.24, 29.19, 57.11, and 5.27 ${\mu}g/mL$, respectively. Among the detected catechins, the level of (-)-epigallocatechin gallate was the highest while that of (-)-epigallocatechin was not detected. The June-harvested leaves were selected as raw material for development of the green tea beverage, based on the levels of catechins, economic viability and yield of tea extract. As the level of extract increased, the levels of catechins of 0.1, 0.2, 0.5% also increased by 1.5, 11.78 and 41.01 times. From the results of the sensory evaluation of June-harvested leaf-extract, the sensory score of color was the highest in 0.1%, while the flavor and overall quality were the highest in 0.2%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.64-77
• /
• 2022

Objectives: The purpose of this study is to objectify the level of case management performance and the factors influencing performance, to improve the case management performance at the Korea Worker's Compensation & Welfare Service (KWCWS) on the basis of the recognition of the objective realities of case management by job coordinators at the KWCWS, to develop a model of case management fit for the KWCWS, and to provide a basis for establishing guidelines for standardized case management. Methods: A total of 156 questionnaires were distributed to job coordinators at the KWCWS's headquarters, six regional headquarters, and 55 branches. One hundred forty-one questionnaires were collected and 126 were analyzed statistically using SPSS 21.0. Factor analysis and reliability analysis were conducted to verify the validity and reliability of the main measurement items in the research model. Frequency analysis was conducted for general characteristics of survey subjects. Frequency analysis or descriptive statistics were conducted to identify the level of independent variables (case manager's individual variables, job variables, institutional and organizational variables). Dependent variables (case management performance) and the degree of correlation were analyzed through correlation analysis between research variables. Multiple regression analysis and hierarchical regression analysis were conducted to examine the effect of independent variables on case management performance. Results: The results of the study showed that the level of overall performance in the five stages of case management was ordinary, with an average level of 3.45 on a 5-point scale. Levels of performance by step were institutional approach and intake (3.69), assessment (3.63), goal setting and intervention planning (3.46), implementation of intervention plan (3.32), and evaluation and termination (3.20), in that order. The explanatory power of case management performance (overall) by case managers with the KWCWS was case manager's institutional and organizational variables, job variables, and individual variables, in that order. At each stage of case management, the explanatory power of a case manager's institutional and organizational variables was found to be the greatest. The model changes at each stage of case management assume similar aspects statistically. In hierarchical regression analysis, it was institutional support that had a significant effect on case management performance (overall), and institutional support had the greatest effect. The results of multiple regression analysis in which all variables are input simultaneously showed that institutional support and expertise as well as self-efficacy had a positive effect. However, case management work experience, expertise (technology), and autonomy were found to have a negative effect during the stage of case management performance. Conclusions: As a result of the study, it was confirmed that raising the case manager's expertise and support from the institution and organization are important factors to improve the level of case management performance. The research also derived practical ways of reinforcement of case manager capacity, institutional and organizational support, operation of rehabilitation-case management teams, and occupational health-related aspects.

• Food Science of Animal Resources
• /
• v.40 no.5
• /
• pp.689-698
• /
• 2020

The aim of study was to scrutinize the physicochemical and protein profile of milk obtained from local Pakistani breeds of milch animals such as Nilli-Ravi buffalo, Sahiwal cow, Kajli sheep, Beetal goat and Brela camel. Physicochemical analysis unveiled maximum number of total solids and protein found in sheep and minimum in camel. Buffalo milk contains the highest level of fat (7.45%) while camel milk contains minimum (1.94%). Ash was found maximum in buffalo (0.81%) and sheep (0.80%) while minimum in cow's milk (0.71%). Casein and whey proteins were separated by subjecting milk to isoelectric pH and then analyzed through sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The results showed heterogeneity among these species. Different fractions including α_S1, α_S2, κ-casein, β-casein and β-lactoglobulen (β-Lg) were identified and quantitatively compared in all milk samples. Additionally, this electrophoretic method after examining the number and strength of different protein bands (α_S1, α_S2, β-CN, α-LAC, BSA, and β-Lg, etc.), was helpful to understand the properties of milk for different processing purposes and could be successfully applied in dairy industry. Results revealed that camel milk was best suitable for producing allergen free milk protein products. Furthermore, based on the variability of milk proteins, it is suggested to clarify the phylogenetic relationships between different cattle breeds and to gather the necessary data to preserve the genetic fund and biodiversity of the local breeds. Thus, the study of milk protein from different breed and species has a wide range of scope in producing diverse protein based dairy products like cheese.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.172-180
• /
• 2014

Fenpyrazamine which is a pyrazole fungicide class for controlling gray mold, sclerotinia rot, and Monilinia in grapevines, stone fruit trees, and vegetables has been registered in republic of Korea in 2013 and the maximum residue limits of fenpyrazamine is set to grape, peach, and mandarin as 5.0, 2.0, and 2.0 mg/kg, respectively. Very reliable and sensitive analytical method for determination of fenpyrazamine residues is required for ensuring the food safety in agricultural products. Fenpyrazamine residues in samples were extracted with acetonitrile, partitioned with dichloromethane, and then purified with silica-SPE cartridge and eluted with hexane and acetone mixture. The purified samples were determined by HPLC-UVD and confirmed with LC-MS and quantified using external standard method. Linear range of fenpyrazamine was between $0.1{\sim}5.0{\mu}g/mL$ with the correlation coefficient (r) 0.999. The average recovery ranged from 71.8 to 102.7% at the spiked level of 0.05, 0.5, and 5.0 mg/kg, while the relative standard deviation was between 0.1 and 7.3%. In addition, limit of detection and limit of quantitation were 0.01 and 0.05 mg/L, respectively. The results revealed that the developed and validated analytical method is possible for fenpyrazamine determination in agricultural product samples and will be used as an official analytical method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.105-117
• /
• 2014

Acquisition of information through the broadcast media is essential for modern life and each broadcaster has progressed its service over the internet with the development of digital technology. Under this circumstance, this study presented the results which compared and analyzed the web accessibility evaluation for Korea, USA, and Japan's leading broadcaster web sites. According to the study results, there was no significant difference in the level of accessibility in all web sites of three countries, but accessibility compliance rate such as alternate text, skip-navigation of repeated region, and title was somewhat insufficient for Korean web sites. In addition, accessibility errors in the brightness contrast of the text contents, the run of the functions that a user doesn't have any intention, the clear statement of the default language, and the label provision were investigated. Therefore, Korean broadcasters should urgently improve and modify these errors and problems for effective web accessibility.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.945-951
• /
• 2013

This study evaluated the fatigue strength of the bogie frame of an urban maglev train through fatigue analysis, cumulative damage, and fatigue tests based on a proposed fatigue evaluation method. The results of FEM analysis in which various load combinations were adopted showed that all data were under the fatigue limit of a butt welded joint made of A6005 in a Goodman diagram. The cumulative fatigue damage was calculated at the highest level from a bolt connecting the area of the electromagnetic pole in the casting block; however, the total sum was evaluated as D=0.808 based on $1{\times}10^7$ cycles, which indicates that it did not exceed the failure criteria. In addition, the results of the fatigue testshowed that there was no crack at any position in the bogie frame, which corresponded to the results of fatigue analyses.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.53-62
• /
• 2020

The COVID 19 pandemic has led to a new global recession and is still causing a lot of issues because of the delays in the employment of people. This scenario has severe consequences for many countries' labor markets in the world. This problem's complexity and importance requires an integrated method of subjective and objective evaluation rather than intuitive decisions. This research aims to investigate sustainable indexes for assessing the unemployment problem by using a Multi-Criteria Decision-Making Model (MCDM). Grey theory and Decision Making Trial and Evaluation Laboratory (GDEMATEL) are deployed to transform the experts' opinions into quantitative data. The analysis based on 20 crucial criteria is employed to determine the weights of sustainability of unemployment problems. The results revealed that the top ten of determinants are Economic growth, Industrialization, Foreign direct investment, Real GDP per capita, Education level, Trade Openness, Capacity Utilization Rate, Urbanization, Employability skills, Education system expansion, which have the most significant effects on the unemployment rate under COVID 19 impacts. Furthermore, GDEMATEL could effectively assess the sustainable indicators for unemployment problems in "deep and wide" aspects. The study proposes the Grey MCDM model, contributes to the literature, provides future research directions, and helps policymakers and researchers achieve the best solutions to the unemployment problems under "economic shocks."

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.1-12
• /
• 2018

In this study, we introduce the background and model for the Test of Practical Competency in ICT(TOPCIT), which is designed to diagnose and assess the competency of ICT industry related workers and software(SW) developers, and also attempt to derive meaningful policy implications for developing a global level of ICT SW competency evaluation system across the different cases in domestic and foreign countries with regard to the application and dissemination of the TOPCIT. First, we analyze the test results from surveys conducted a preliminary test (or a pilot test) for the process of global dissemination of the TOPCIT in 2015. Then, we attempt to compare the results with the domestic test results. The findings show that the average score between domestic and foreign test takers was similar, but in the highest score group, the number of domestic test takers was relatively higher than the number of foreign test takers. Moreover, the average score can be varied by the language ability, especially fluent in English, of test takers. Therefore, the findings suggest that the localization is one of the key components for building upon the global TOPCIT system.

• Journal of Welding and Joining
• /
• v.24 no.6
• /
• pp.21-27
• /
• 2006

This study was focused on the evaluation of the thermo-mechanical board-level reliability of Pb-bearing and Pb-free surface mount assemblies. The composition of Pb-bearing solder was a typical Sn-37Pb and that of Pb-free solder used in this study was a representative Sn-3.0Ag-0.5Cu in mass %. Thermal shock test was chosen for the reliability evaluation of the solder joints. Typical $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed between both solders and Cu lead frame at the as-reflowed state, while a layer of $Cu_3Sn$ was additionally formed between the $Cu_6Sn_5$ and Cu lead frame during the thermal shock testing. Thickness of the IMC layers increased with increasing thermal shock cycles, and this is very similar result with that of isothermal aging study of solder joints. Shear test of the multi layer ceramic capacitor(MLCC) joints was also performed to investigate the degradation of mechanical bonding strength of solder joints during the thermal shock testing. Failure mode of the joints after shear testing revealed that the degradation was mainly due to the excessive growth of the IMC layers during the thermal shock testing.