• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.566-576
• /
• 2018

The C-ITS requires the lane level positioning of the vehicle in the land transportation environment, and it is most effective to utilize the GNSS. In the precision positioning system based on satellite navigation, the evaluation of dynamic environment of lane level positioning performance should be accompanied and the evaluation system configuration should be preceded. In this paper, we selected performance indicators, assessment equipment, and reliability of reference equipment for evaluation of precision positioning user systems based on the GNSS. The performance evaluation system described above is applied to a real system, and the performance evaluation tool developed for the evaluation system is described. The numerical performance evaluation was carried out based on the data collected by carrying out the actual testbed driving. The performance evaluation by the actual driving trajectory and driving image comparison was performed to derive and analyse the evaluation results of the vehicle lane level positioning user system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.64-77
• /
• 2022

Objectives: The purpose of this study is to objectify the level of case management performance and the factors influencing performance, to improve the case management performance at the Korea Worker's Compensation & Welfare Service (KWCWS) on the basis of the recognition of the objective realities of case management by job coordinators at the KWCWS, to develop a model of case management fit for the KWCWS, and to provide a basis for establishing guidelines for standardized case management. Methods: A total of 156 questionnaires were distributed to job coordinators at the KWCWS's headquarters, six regional headquarters, and 55 branches. One hundred forty-one questionnaires were collected and 126 were analyzed statistically using SPSS 21.0. Factor analysis and reliability analysis were conducted to verify the validity and reliability of the main measurement items in the research model. Frequency analysis was conducted for general characteristics of survey subjects. Frequency analysis or descriptive statistics were conducted to identify the level of independent variables (case manager's individual variables, job variables, institutional and organizational variables). Dependent variables (case management performance) and the degree of correlation were analyzed through correlation analysis between research variables. Multiple regression analysis and hierarchical regression analysis were conducted to examine the effect of independent variables on case management performance. Results: The results of the study showed that the level of overall performance in the five stages of case management was ordinary, with an average level of 3.45 on a 5-point scale. Levels of performance by step were institutional approach and intake (3.69), assessment (3.63), goal setting and intervention planning (3.46), implementation of intervention plan (3.32), and evaluation and termination (3.20), in that order. The explanatory power of case management performance (overall) by case managers with the KWCWS was case manager's institutional and organizational variables, job variables, and individual variables, in that order. At each stage of case management, the explanatory power of a case manager's institutional and organizational variables was found to be the greatest. The model changes at each stage of case management assume similar aspects statistically. In hierarchical regression analysis, it was institutional support that had a significant effect on case management performance (overall), and institutional support had the greatest effect. The results of multiple regression analysis in which all variables are input simultaneously showed that institutional support and expertise as well as self-efficacy had a positive effect. However, case management work experience, expertise (technology), and autonomy were found to have a negative effect during the stage of case management performance. Conclusions: As a result of the study, it was confirmed that raising the case manager's expertise and support from the institution and organization are important factors to improve the level of case management performance. The research also derived practical ways of reinforcement of case manager capacity, institutional and organizational support, operation of rehabilitation-case management teams, and occupational health-related aspects.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.292-312
• /
• 2017

The purposes of this research are to verify: first, if the technology appraisal model reflects the company's management performance and the rates of bankruptcy and overdue; second, if the existing classification system of technology levels is suitable; and third, which is the most important appraisal factor that defines the classification system of technology levels. As a result of the analysis, financial performance (stability) and non-financial performance (technology environment) proved to be significant variables in explaining technology ratings. According to the verification of the suitability of classification system, it appeared that there is a significant difference in all appraisal items of all groups. The result of neural networks model verification indicates that the most important variable was the R&D capacity, the second variables which determine the suitability of technology financing were indicators related to the company management. The second variables which determine a company's technological excellence were a company's technological base. To summarize, the technology appraisal model not only reflects both managerial performance and risks of a company, but also anticipates the future by converging the management competence and technological competitiveness into R&D capacity. This implies that if the 'forward-looking' technology appraisal model is integrated into the existing, credit rating model, the appraisal model may have positive impact on improving anticipation and stability.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.71-81
• /
• 2013

Trace metal concentration in sediment cores from the outer sea of Lake Shihwa were determined to study the vertical profiles of metal concentrations and to evaluate the levels of metal contamination. Sediment pollution assessment was carried out using enrichment factor (EF) and geo-accumulation index (Igeo). The mean concentration of metals were 58.8 mg/kg for Cr, 10.3 mg/kg for Co, 22.8 mg/kg for Ni, 18.1 mg/kg for Cu, 74.0 mg/kg for Zn, 6.75 mg/kg for As, 0.14 mg/kg for Cd, 27.4 mg/kg for Pb and 0.026 mg/kg for Hg, respectively. The mean EF values for Cu, Zn, As, Cd and Hg were greater than 1.5 in sediment cores, indicating that these metals in sediments are slightly enriched by anthropogenic activities. The geo-accumulation index (Igeo) suggested unpolluted status for metals of sediments collected from outer see of Lake Shihwa. Igeo values for Cu and Hg nearby LNG station (site C, D, E) ranged from 1 to 2, indicating moderately to unpolluted pollution status for those metals. Even if the higher concentrations of trace metals nearby LNG station were observed, there is significantly positive relationship between Al and trace metals. Thus, the sediment grain size plays an important roles in influencing the distribution of trace metals in sediment cores from the outer sea of Lake Shihwa. Based on the comparison with sediment quality guidelines such as threshold effect level and probable effect level in Korea, the concentration of metals in sediments from outer sea of Lake Shihwa are likely to result in no harmful effects on sediment-dwelling organisms.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.153-165
• /
• 2014

Carbon dioxide capture and storage (CCS) technology is recognizing one of method responding the climate change with reduction of carbon dioxide in atmosphere. In Korea, due to its geological characteristics, sub-seabed geological $CO_2$ storage is regarded as more practical approach than on-land storage under the goal of its deployment. However, concerns on potential $CO_2$ leakage and relevant acidification issue in the marine environment can be an important subject in recently increasing sub-seabed geological $CO_2$ storage sites. In the present study effect data from literatures were collected in order to conduct an effect assessment of elevated $CO_2$ levels in marine environments using a species sensitivity distribution (SSD) various marine organisms such as microbe, crustacean, echinoderm, mollusc and fish. Results from literatures using domestic species were compared to those from foreign literatures to evaluate the reliability of the effect levels of each biological group and end-point. Ecological effect guidelines through estimating level of pH variation (${\delta}pH$) to adversely affect 5 and 50% of tested organisms, HC5 and HC50, were determined using SSD of marine organisms exposed to the $CO_2$-induced acidification. Estimated HC5 as ${\delta}pH$ of 0.137 can be used as only interim quality guideline possibly with adequate assessment factor. In the future, the current interim guideline as HC5 of ${\delta}pH$ in this study will look forward to compensate with supplement of ecotoxicological data reflecting various trophic levels and indigenous species.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.283-291
• /
• 2020

The purpose of this study is to analyze the relative efficiency of the research results of the convergence research project (CAP, Convergence Research Center) and general trust research project under the auspices of the NST, as the qualitative assessment of the government's R&D investment has recently been emphasized. To achieve this objective, DEA, which is widely used for the relative efficiency of research results, was used. The analysis targets were focused on the case of the KBSI, and the quantitative assessment of the number of papers and patent applications using net research and labor costs as input indicators for the DEA was compared and analyzed through IF of the paper and SMART3 of the patent. The analysis results showed that convergence research projects were highly efficient from a qualitative perspective in terms of CCR standards and BCC standards. This suggests that convergence research is being conducted at a higher level than general entrusted research. As a result of this study, we would like to present the criteria for qualitative assessment, which the government has recently emphasized, and expand this study to provide implications for planning policies and research tasks for rational R&D investment choices for human resources and research funds by assessing the efficiency of qualitative perspectives on all institutions in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.82-92
• /
• 2019

The purpose of this study was to analyze the relationship and degree of agreement between the six types of Geometry Psychological Assessment (GEOPIA) and four functions of the Myers-Briggs Type Indicator (MBTI) personality test, and to investigate the appropriate level of vocational aptitude commonly recommended by each tool. A total of 377 adult men and women from Korea, aged between 19 and 70 years, were tested using GEOPIA and the MBTI. Cronbach's alpha was calculated to verify the validity and reliability of the measuring tools, and the mean and standard deviation of each variable were calculated. Also, a cross-sectional analysis was conducted to examine the relationship between GEOPIA and the MBTI. The results showed that Round/Triangle (RT) types, Round/Box (RB) types, Triangle/Box (TB) types and Box/Curve (BC) types among the GEOPIA personality types are highly related to MBTI's Sensing/Thinking (ST) types. GEOPIA RC types were related to Intuition/Feeling (NF) and Sensing/Feeling (SF) types, and TC types were highly related to Intuition/Thinking (NT) types. Based on the common characteristics of the two tests, the findings suggest appropriate levels of vocational aptitude. Through this research, it was confirmed that GEOPIA (a Korean psychology and personality test) can be used in counseling, coaching, and education, and above all, is a reliable tool for vocational psychological assessment to search for career aptitude.

• 한국노년학
• /
• v.39 no.4
• /
• pp.895-902
• /
• 2019

This study reviewed the diagnosis accuracy and evaluation criteria of the fall risk assessment questionnaire that proved validity through factor analysis in previous studies. The purpose of this study was to diagnose high-risk groups and propose personal fall risk profiles for the Korean community-dwelling elderly. The participants of this study were 439 elderly people living in S, U, B, and Y cities Korea (mean age 75.0 ± 5.7 years). Receiver operating characteristic analysis was conducted to review the accuracy of the fall risk assessment and evaluation criteria of the FRA. The results showed that the four sub-factors of the FRA: 'Potential for fall', 'Disease and physical symptoms', 'Environment' and 'Physical function', can effectively diagnose the fall risk of the community-dwelling elderly. The evaluation criteria was presented based on the sensitivity and specificity results. In addition, as a result of analyzing the patterns by the sub factors of the fall risk, the high-risk group accounted for 80% of the elderly who had problems with two or more factors. Therefore, the four sub-factors of FRA can effectively diagnose the fall risk level, and could be present individual fall risk profiles based on the evaluation criteria.

• Korean Journal of Food Science and Technology
• /
• v.52 no.5
• /
• pp.495-502
• /
• 2020

In this study, the physicochemical and sensory characteristics of such as enzymatically treated and texture modified elderly foods made with beef, squid, eel, and mackerel were investigated. The enzymatically treated squid sample showed the proper texture hardness level corresponding to Universal Design Food (UDF) level 1 and all other elderly foods showed hardness consistent with UDF Level 2. The moisture contents were higher than 70% in the enzymatically treated boiled down squid and the two texture modified samples made with eel and mackerel, respectively. The enzymatically treated beef and squid samples contained 25.26 and 21.73% of crude protein, respectively. One serving portion of these enzymatically treated samples provided over 50% of daily needed protein intake of 65 years and older. According to the sensory evaluation of the samples, elderly recognized the differences between all enzyme treatment samples and controls in terms of hardness and chewiness, which are the main factors of the elderly food. In addition, the easier swallowness of texture modified foods were perceived. The positive assessment of elderly on the enzymatically treated samples using beef and squid were confirmed by preference tests.

• Journal of Energy Engineering
• /
• v.20 no.2
• /
• pp.90-95
• /
• 2011

This study was conducted to judge requalification of cylinders by assessing composite flaws such as scratches, cuts, and gouges damaging on the composite of Type III cylinders for compressed natural gas vehicles. As a result of the flaw tolerance test, all specimens have satisfied with minimum requirement cycles according to damage levels based on ISO 19078 and cyclic performance for pressure showed beyond twenty thousands in damage level 1 and 2, and did eighteen thousands to twenty-one thousands in damage level 3. Eight of twelve specimens failed the test due to composite flaws and the rest of the cylinders failed regardless of flaws. The results of Finite Element Method followed by the computer simulation indicated that the stress of 79.5 MPa calculated on the flaw model of $1.25\;mm{\times}200\;mm$ and the stress of 66.6 MPa on the non-flaw model when the service pressure applied to inside of cylinder. The difference between the models is about 19.37%. We concluded that this difference influences fatigue life and this flaw model is a critical value affecting cyclic performance of cylinders.