• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2052-2056
• /
• 2015

This Paper analyzes the characteristics of the WRSM in high-speed operation range. To verify the control characteritics of various WRSM models, the relative position of the central point of current limit circle and voltage limit ellipse is defined as M value and 3 models according to M_max value are designed through inductance change. Through the designed models, the current control method of 3-variables control for maximum power especially in high-speed operation range is presented.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.351-358
• /
• 2021

This research project is a program promoted to seek diversification of domestic radioactive waste analysis institutions, and seeks public development, win-win cooperation, and cooperation between the entrusted institution and the entrusted institution. Accordingly, the entrusted institution established a standard analysis procedure for establishing a quality control system for radioactivity analysis, establishing a radiation control zone, obtaining KOLAS accreditation, and performing proficiency tests, which are the performance ranges requested by the entrusted institution, and intersecting the radioactive isotope waste generated at the actual site. Verification was performed to confirm the analysis quality. In addition, facilities and equipment for radioactivity analysis were supplemented and expanded, and the basic technology foundation and technical skills were secured through securing professional technicians and education/training. It is judged that the entrusted institution will contribute to securing radiation safety through the smooth execution of treatment, disposal, and transportation through value creation and analysis of radioactive waste generated by radioactive isotope-using institutions (research institutes, hospitals, industries, etc.) by succeeding in this research project do.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.460-470
• /
• 2009

In this paper, we described the implementation of the X-Band continuous-wave doppler radar for muzzle velocity measurement. The radar is consisted of microwave transceiver, signal processor, power board, and the measuring program was developed for the operating and field test. The operating frequency of doppler radar is able to set ${\pm}3\;MHz$ with 5 channel from the center frequency, and the output power is 25 dBm. The minimum receiving power is -117 dBm. The radar would obtain the doppler frequency from the artillery, and calculate accurate velocity point and then estimate muzzle velocity. The performance test for this radar was done with 155 mm at barrel and tripod mounted, and also compared the performance with the reference radar. As a result, the performance of the our new radar is equal with the reference one.

• Journal of Korean Elementary Science Education
• /
• v.41 no.4
• /
• pp.725-739
• /
• 2022

This study aims to analyze what elementary school pre-service teachers focused on and what challenges they faced in designing and producing a guided science inquiry program based on augmented reality (AR) and to provide some implications for teachers' professionalism and teacher education. To this end, focusing on the cases of pre-service teachers who designed and created AR-based guided inquiry programs, the researchers extracted and categorized the pre-service teachers' focus and challenges from the program design and production stages. As a result, in the program design stage, the pre-service teachers tried to construct scenarios that could promote students' active inquiry process. At the same time, drawing on the unique affordances of AR, the pre-service teachers focused on creating vivid visual data in a 3D environment and making meaningful connections between virtual and real-world activities. The pre-service teachers faced challenges in making use of the advantages of AR technology and designing an inquiry program due to a lack of background knowledge about CoSpaces, a content creation program. In the program production stage, the pre-service teachers tried to make their program easy to handle to improve students' concentration on inquiry activities. In addition, challenges of programming using CoSpaces were reported. Based on these results, educational implications were discussed in terms of the pedagogical uses of AR and teachers' professionalism in adopting AR in science inquiry.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.315-320
• /
• 2006

We have developed an active front steering system(AFS) with a planetary gear train, which can vary the steering gear ratio according to the vehicle speed and improve vehicle stability by superimposing steering angle. We conducted vehicle tests showing that co-operated control of AFS with ESP can improve vehicle stability by direct control of tire slip angle and that steering reaction torque during AFS intervention can be compensated by torque compensation using electric power steering.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.17-26
• /
• 2013

Recent developing tendency of overlay welding on welding materials are studied by searching of NDSL, Science Direct, KIPRIS and so on. Fe, Co, Ni and WC are selected as welding materials. Development and improvement of various new overlay welding technology, especially improvement of quality and formation of crack are introduced. Also the prospective technologies of overlay welding are anticipated.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Mycobiology
• /
• v.32 no.1
• /
• pp.11-16
• /
• 2004

Winter mushroom, Flammulina velutipes, needs low temperature during its cultivation. To save on farm costs, especially during summer, a strain adaptable to a higher or elevated-temperature must be developed. At the start of breeding program, parental strains which could endure high temperature were obtained. Seuenty four dikaryotic strains were collected and divided into four groups according to the nature of temperature. They also had different fruiting temperature. Finally we selected three brown strains ASI 4048, 4057 and 4072, and collected their spores. These selected strains can germinate even at a high temperature of $32^{\circ}C$, which were dramatically higher than the other strains. Based on these results, the new white strain adapted to mid-temperature by backcross mating was developed. Molecular markers were applied to select white fruitbody producing strains without cultivation. They showed a specific band which co-segregated with brown fruitbody forming strains in $BC_1F_1$ progenies. Selected white strains were tested under several elevated temperature conditions.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.34-43
• /
• 2003

In this study, we implemented the measurement of pH, $pO_2$, $pCO_2$ of the arterial blood on a portable blood gas analysis system. This system is consist of two parts of hardware and software. The hardware part is divided into a fluidic mechanism and an electronic circuit unit. The system program is composed of operating, washing, correcting, and measuring routines. Both of 1-point and 2-point calibration schemes were used to enhance the accuracy of the measurement. In order to evaluate the performance of the developed system, we measured and performed statistical analysis on the characteristics of the sensing electrode response. As a result, coefficient variation was within 1.12, and maximum error was within 1.298%. We confirmed development possibility of portable blood gas analyzer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2868-2875
• /
• 2010

This study was carried out to present a co-brand strategies of medical equipment manufacturers in Wonju city. Based on the result of the analysis, followings were proposed. First, an adequate education and a publicity for the importance of a co-brand are required, and it needs to reinforce the recognition on quality differentiation through a technology development and the importance of quality control. Second, establishing a system to secure the brand reliability and operating a program to monitor the technology development and quality are required. Third, it needs to implement a joint participation with priority for establishing a sales network, advertize and a publicity. Fourth, an alternative may needed in order to maximize the synergy effect of the co-brand project and minimize any possible conflicts among participants. Fifth, securing a reliability is needed to acquire the ability to manage the brand and derive member's active participation.