• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.3-10
• /
• 2005

The purpose of this study is to investigate the properties of composite systems using polymer cement and epoxy resins for waterproofing and anti-corrosion to concrete structures such as water supply facilities and sewage-works. For the waterproofing and anti-corrosion of concrete structures, there can be required various properties such as absorption capacity and water permeability, adhesion and tensile strength, hair crack-resistance, impact-resistance, repeated low and high temperature test and chemical resistance, soundness for drinking water, soundness for drinking water and etc. In this study these engineering properties of composite systems using polymer-modified mortar and epoxy resins were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49 mm will be perform.

• Advances in nano research
• /
• v.8 no.4
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.591-597
• /
• 2015

In this study, extracts of chlorella using different extraction methods were compared for antioxidant activities and spray-dried chlorella powders were investigated for their physicochemical characteristics. The DPPH radical scavenging activity and superoxide radical scavenging activity of 50% ethanol extract were 29.19%, and 48.91%, respectively. The oxygen radical absorbance capacity (ORAC) of the 50% ethanol extract ($150.44{\mu}M/g$) was higher than those of other extracts. The total chlorophyll content of the 50% ethanol extract (542.89 mg/100 g) was higher than those of other extracts. The microencapsulation of the 50% ethanol extract was manufactured by spray-drying with 10 % maltodextrin (SD-C10), 20% maltodextrin (SD-C20), and 30% maltodextrin (SD-C30). The particle size of the freeze-dried powder ($454.47{\mu}m$) was higher than those of the spray-dried powders ($24.15{\sim}32.49{\mu}m$). Scanning electron microscope images showed that the spray-dried chlorella powders using SD-C10, SD-C20, and SD-C30 had an uniform particle distribution. The water absorption index and water solubility index (WSI) of powders were 0.31~0.45, and 96.96~98.28%, respectively. The spray-dried powders showed the stability in total chlorophyll content for 40 days storage. Based on these results, spray-dried chlorella powders could be used in various types of food processes.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.1-8
• /
• 1993

Extruded defatted soy flour (DSF) with twin screw extruder was compared with steam treated DSF for soy sauce fermentation. Independent variables of response surface methodology (RSM) for extrusion were barrel temperature $(145{\sim}165^{\circ}C)$, feed moisture content $(25{\sim}35%)$, and feed rate $(20{\sim}30\;kg/hr)$. Extrusion conditions for production of the extrudates having highest water absorption capacity, lowest bulk density and highest expansion ratio were obtained by regression analysis of each dependent variable. Electron photomicrographs revealed significant increase of porosity inside the koji made from extruded DSF. Therefore, growth of fungi inside the koji made from extrudates of DSF was accelerated to achieve higher activities of protease, ${\alpha}-amylase$, and glucoamylase compared to the koji made from steamed DSF. Although amino acid composition of soy sauces prepared from two different DSF did not show any significant difference, the content of free amino acids in soluble nitrogen compounds was higher $(13%{\pm}2)$ in soy sauce made from extruded SDF. During the whole period of fermentation color of soy sauce made from extrudates of DSF was darker. Sensory evaluation did not reveal any serious off-odor and off-taste in the soy sauce fermented from extruded DSF.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1295-1300
• /
• 1998

This study was conducted to investigate the effect of soybean protein isolate (SPI) on the baking qualities of bread which was made of composite flour blended with SPI extracted at acidic (pH 2.0, 3.0), neutral (pH 7.0) and alkaline (pH 10.0, 12.0) conditions. The mixogram showed that water absorption of composite flour dough blended with SPI extracted at pH 2.0 and 12.0 was higher than that of 100% wheat flour dough, and mixing time was shorter than that of 100% wheat flour dough. No differences were found between the composite flour blended with SPI at level of 5% and 100% wheat flour on the loaf volume of bread. The loaf volume of bread made of composite flour blended with $SPI_2\;AND\;SPI_3$ at level of 10% was lower than that of 100% wheat flour, but that of $SPI_7,\;SPI_{10},\;and\;SPI_{12}$, which had higher emulsion capacity than $SPI_2,\;SPI_3$ was similar to that of 100% wheat flour. No differences were found between the composite flour blended with SPI at level of 5% and that of 100% wheat flour on springiness, chewiness, cohesiveness, gumminess, adhesiveness and hardness of bread. The composite flour blended with SPI at level of 10% was similar to 100% wheat flour on springiness, chewiness, cohesiveness, gumminess, adhesiveness and hardness of bread except for chewiness, gumminess and hardness of $SPI_2,\;and\;SPI_{12}$ which were significantly higher than that of 100% wheat flour (P<0.05).

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.9.1-9.11
• /
• 2018

Background: In recent years, with the prohibition of antibiotics used as growth stimulants in the nutrition of farm animals, researchers have searched for alternative natural and reliable products in order to be able to sustain the developments experienced during the use of antibiotics and to overcome the possible inconveniences. In this context, studies on evaluation of essential oils in poultry nutrition have been reported to improve the utilization of feed, stimulate the release of digestive enzymes, increase absorption in the stomach and intestines, antimicrobial and anti-parasitic effects and thus, can be an alternative to antibiotics and improve meat quality as well. Indeed, this study has been carried out to explore the effects of the addition of 150 mg/kg capsicum oleoresin (CAP), carvacrol (CAR), cinnamaldehyde (CIN) or their mixture (CAP+CAR+CIN) into the broilers' ration over sensory, physical and chemical properties in breast meat and leg meat. Methods: Experiments were conducted over 400 male and female broiler chicks (Ross-308) in 5 groups (1 control group and 4 treatment groups), each composed of 80 chicks. The control group was fed without feed additives while the second, third, fourth and the fifth groups were fed with 150 mg CAP/kg feed, 150 mg CAR/kg feed, 150 mg CIN/kg feed, and 150 mg CAP+CAR+CIN/kg feed, respectively. Results: Addition of CAP, CAR, CIN or CAP+CAR+CIN had effects on the sensory (of taste, tenderness, juiciness and overall acceptability); physical properties (of $L^*$ value and toughness), the chemical properties (of DM, CF, CP, linoleic, EPA, behenic, MUFA, PUFA and ${\Sigma}n-6$ of the leg meat), the physical characteristics (of toughness and firmness), and the chemical properties (of CF, CP, linoleic, ecosenic, EPA, lignoseric, MUFA and ${\Sigma}n-3$) of the breast meat in comparison to control group. Furthermore, while the treatments had positive impacts on thawing loss, cooking loss and water holding capacity in both breast and leg meat; no effect was observed on pH value and lipid oxidation on day 1, day 4 and day 8. Conclusion: The results strongly suggested that the addition of CAP, CAR, CIN or CAP+CAR+CIN to the rations of the broiler chicks changed the sensory, physical and chemical properties of breast and leg meat. It was also observed that these compounds were more effective when they were added to the ratio as a mixture rather than adding them individually.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.546-551
• /
• 1993

Rice flour obtained by four different milling methods, Pin mill. Colloid mill, Micro mill, and Jet mill, were used to investigate physico-chemical properties and product. Crude fat, ash, and protein contents of rice flours between different milling methods were similar. Blue value, amylose content, and damaged starch which related to properties of rice flour were reduced in the order that of Jet mill, Micro mill, Colloid mill, and Pin mill. Water absorption index, water solubility index, and water retention capacity increased as damaged starch increased. Hardness of gel(15%) is the highest value for Pin mill. The finer granules (Jet mill) had lower gelatinization onset(To) and peak(Tp) than any other rice flours. Those result are simillar with amylogram properties. Enthalpy of gelatinization increased as damaged starch increased. Jet mill had the highest score (p<0.05) of overall test in sensory evaluation and good paste properties.

• Korean Journal of Food Science and Technology
• /
• v.7 no.4
• /
• pp.187-193
• /
• 1975

A supplemental effect of Undaria Pinnatifida extract on the composite flour prepared from a blend of wheat, barley, sweet potato, potato, and defatted soybean flours was studied in terms of binding properties, cooking test, and sensory analysis. Dry noodle of the composite flour was made by the conventional method and air dried. Instant noodle was prepared in a hot vegetable oil bath after the noodle was made. The standard was made of wheat flour only. 1. The noodle prepared with composite flour (wheat flour : barley flour, 5 : 5) and Undaria Pinnatifida extract (1 or 2%) showed same results of cooking and sensory tests as well as properties of texture as the standard. 2. The mixture of wheat, barley and defatted soybean flour (10%) had a less efficient binding capacity with Undaria Pinnatifida extract. The binding effect was, however, significantly improved with the wheat and barley flour mixture with either sweet potato or potato flour. 3. The instant noodle prepared with the composite flour (either barley, or sweet potato, or potato was mixed with wheat flour up to 70% separately) and hydroxypropyl methyl cellulose (1% as final) showed the higher oil absorption and the sensory results were the same as the standard. Nevertheless, the binding properties and cooking quality were less efficient.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.618-627
• /
• 2016

This study evaluated the hydration, gelatinization, and saccharification properties of rice processing for beverage development. The properties of rice were studied on 10 rice cultivars (Samkwang, Ilpum, Seolgaeng, Anda, Dasan-1, Goami-4, Danmi, American rice, Chinese rice, and Thai rice) and employing four kinds of pre-treatment methods (dry grain, wet grain, dry flour, and wet flour). The results showed that moisture content of rice was between 11.88~15.26%. Increase in soaking time along with highest water absorption was noted in American rice cultivar (46.81%). The water binding capacity of Thai rice was higher when compared to that of other rice flours. In addition, solubility and swelling power of rice were 4.52~26.65% and 0.19~2.05%, respectively. The amylose content of Goami-4 was higher in rice processing. Using a rapid visco analyzer (RVA), the initial pasting temperature of Danmi cultivar was found to be the highest; the peak viscosities of Anda cultivar and Dasan-1 cultivar, and Chinese rice were higher than of those of other rice flours. After saccharification, the pH, soluble solids content, and reducing sugar content of rice processed through different pre-treatment methods were in the range of 6.22~7.08, $4.67{\sim}16.07^{\circ}Brix$, and 0.35~11.67% (w/w), respectively. In terms of color values, the L-value of dry grain, a-value of wet (grain, flour), and b-value of dry sample (grain, flour) were found to be the highest. Assessment of various factors and cultivars characteristics of the raw grains are of importance in the development of rice beverage.